News
Tesla’s land purchase for Gigafactory Berlin finally gets finalized
Tesla has officially paid for its 300-hectare land near Grünheide in the state of Brandenburg, Germany, where the company’s Giga Berlin facility will eventually stand.
The Brandenbürg State Environment Ministry informed German media outlet rbb24 that Tesla had transferred €43.4 million to pay for the land on Tuesday. Tesla Brandenburg SE, a subsidiary of Tesla’s leading U.S. parent company, was already registered as a company in Germany’s land register, rbb24 reported.
“With that, we have made another small step forward,” Jörg Steinbach, the Minister of Economics for Brandenburg, said to Der Prignitzer newspaper on Tuesday.
In early January 2020, rbb24 reported that Tesla had negotiated a killer deal for the property, with the company reportedly poised to pay just €13.52 per square meter for the property. This price would have given Tesla the property for just €40.91 million, or USD45.48 million.
However, some government officials complained that the price-per-square-meter was too cheap, especially considering the value of other nearby properties. A Democratic budget politician by the name of Ronny Kretschmer stated that the property should have been purchased for around €40 per square meter because nearby lots were being sold at that price.
Local officials then decided that a pricing revision would be a necessary move, and finalized the new price of €43.4 million.
The next step in Tesla’s Giga Berlin project is to receive approval from the local authorities to begin construction of the production facility itself. After construction crews completed the ground-leveling process at the factory grounds, Tesla applied for preliminary approval to start building the production facility in early April.
Brandenburg’s Environmental Ministry Spokeswoman Frauke Zelt said the office had received Tesla’s application on April 2.
Tesla is looking to keep its target schedule for Giga Berlin. The company plans to begin building vehicles, batteries, and powertrains, starting with the Model Y in July 2021. However, Brandenburg’s local government requires a public forum for citizens to voice their concerns before construction can begin.
The coronavirus pandemic is keeping this meeting from happening as it is typically held in a meeting room where citizens can voice their concerns about the project in question. Social distancing regulations have incited suggestions that the meeting could be conducted online, but the internet is not accessible for every citizen in the area.
Zelt has stated that she believes the project should be delayed until the meeting can take place in person. However, this could delay the construction until later in 2020, and production dates could end up being forced back to late 2021. Jörg Steinbach is doing what he can to help by taking advantage of exemptions that can help Tesla stay on schedule. Steinbach has been one of Tesla’s most prominent supporters throughout the process, as he believes the Giga Berlin facility is “an anchor on which others can stand up.”
Tesla plans to produce 500,000 vehicles annually at the Giga Berlin facility.
Cybertruck
Tesla drops latest hint that new Cybertruck trim is selling like hotcakes
According to Tesla’s Online Design Studio, the new All-Wheel-Drive Cybertruck will now be delivered in April 2027. Earlier orders are still slated for early this Summer, but orders from here on forward are now officially pushed into next year:
Tesla’s new Cybertruck offering has had its delivery date pushed back once again. This is now the second time, and deliveries for the newest orders are now pushed well into 2027.
According to Tesla’s Online Design Studio, the new All-Wheel-Drive Cybertruck will now be delivered in April 2027. Earlier orders are still slated for early this Summer, but orders from here on forward are now officially pushed into next year:
🚨 Tesla has updated the $59,990 Cybertruck Dual Motor AWD’s estimated delivery date to April 2027.
First deliveries are still slated for June, but if you order it now, you’ll be waiting over a year.
Demand appears to be off the charts for the new Cybertruck and consumers are… pic.twitter.com/raDCCeC0zP
— TESLARATI (@Teslarati) February 26, 2026
Just three days ago, the initial delivery date of June 2026 was pushed back to early Fall, and now, that date has officially moved to April 2027.
The fact that Tesla has had to push back deliveries once again proves one of two things: either Tesla has slow production plans for the new Cybertruck trim, or demand is off the charts.
Judging by how Tesla is already planning to raise the price based on demand in just a few days, it seems like the company knows it is giving a tremendous deal on this spec of Cybertruck, and units are moving quickly.
That points more toward demand and not necessarily to slower production plans, but it is not confirmed.
Tesla Cybertruck’s newest trim will undergo massive change in ten days, Musk says
Tesla is set to hike the price on March 1, so tomorrow will be the final day to grab the new Cybertruck trim for just $59,990.
It features:
- Dual Motor AWD w/ est. 325 mi of range
- Powered tonneau cover
- Bed outlets (2x 120V + 1x 240V) & Powershare capability
- Coil springs w/ adaptive damping
- Heated first-row seats w/ textile material that is easy to clean
- Steer-by-wire & Four Wheel Steering
- 6’ x 4’ composite bed
- Towing capacity of up to 7,500 lbs
- Powered frunk
Interestingly, the price offering is fairly close to what Tesla unveiled back in late 2019.
Elon Musk
Elon Musk outlines plan for first Starship tower catch attempt
Musk confirmed that Starship V3 Ship 1 (SN1) is headed for ground tests and expressed strong confidence in the updated vehicle design.
Elon Musk has clarified when SpaceX will first attempt to catch Starship’s upper stage with its launch tower. The CEO’s update provides the clearest teaser yet for the spacecraft’s recovery roadmap.
Musk shared the details in recent posts on X. In his initial post, Musk confirmed that Starship V3 Ship 1 (SN1) is headed for ground tests and expressed strong confidence in the updated vehicle design.
“Starship V3 SN1 headed for ground tests. I am highly confident that the V3 design will achieve full reusability,” Musk wrote.
In a follow-up post, Musk addressed when SpaceX would attempt to catch the upper stage using the launch tower’s robotic arms.
“Should note that SpaceX will only try to catch the ship with the tower after two perfect soft landings in the ocean. The risk of the ship breaking up over land needs to be very low,” Musk clarified.
His remarks suggest that SpaceX is deliberately reducing risk before attempting a tower catch of Starship’s upper stage. Such a milestone would mark a major step towards the full reuse of the Starship system.
SpaceX is currently targeting the first Starship V3 flight of 2026 this coming March. The spacecraft’s V3 iteration is widely viewed as a key milestone in SpaceX’s long-term strategy to make Starship fully reusable.
Starship V3 features a number of key upgrades over its previous iterations. The vehicle is equipped with SpaceX’s Raptor V3 engines, which are designed to deliver significantly higher thrust than earlier versions while reducing cost and weight.
The V3 design is also expected to be optimized for manufacturability, a critical step if SpaceX intends to scale the spacecraft’s production toward frequent launches for Starlink, lunar missions, and eventually Mars.
News
Tesla FSD (Supervised) could be approved in the Netherlands next month: Musk
Musk shared the update during a recent interview at Giga Berlin.
Tesla CEO Elon Musk shared that Full Self-Driving (FSD) could receive regulatory approval in the Netherlands as soon as March 20, potentially marking a major step forward for Tesla’s advanced driver-assistance rollout in Europe.
Musk shared the update during a recent interview at Giga Berlin, noting that the date was provided by local authorities.
“Tesla has the most advanced real-world AI, and hopefully, it will be approved soon in Europe. We’re told by the authorities that March 20th, it’ll be approved in the Netherlands,’ what I was told,” Musk stated.
“Hopefully, that date remains the same. But I think people in Europe are going to be pretty blown away by how good the Tesla car AI is in being able to drive.”
Tesla’s FSD system relies on vision-based neural networks trained on real-world driving data, allowing vehicles to navigate using cameras and AI rather than traditional sensor-heavy solutions.
The performance of FSD Supervised has so far been impressive. As per Tesla’s safety report, Full Self-Driving Supervised has already traveled 8.3 billion miles. So far, vehicles operating with FSD Supervised engaged recorded one major collision every 5,300,676 miles.
In comparison, Teslas driven manually with Active Safety systems recorded one major collision every 2,175,763 miles, while Teslas driven manually without Active Safety recorded one major collision every 855,132 miles. The U.S. average during the same period was one major collision every 660,164 miles.
If approval is granted on March 20, the Netherlands could become the first European market to greenlight Tesla’s latest supervised FSD (Supervised) software under updated regulatory frameworks. Tesla has been working to secure expanded FSD access across Europe, where regulatory standards differ significantly from those in the United States. Approval in the Netherlands would likely serve as a foundation for broader EU adoption, though additional country-level clearances may still be required.
Tesla drops latest hint that new Cybertruck trim is selling like hotcakes
Elon Musk outlines plan for first Starship tower catch attempt
