Connect with us

News

SpaceX Starship test plans solidify after bad weather delays hop

Published

on

Around the same time SpaceX was preparing for its 100th Falcon rocket launch, bad Texas weather forced the company to abort its second Starship hop test of the month.

Since that abort, SpaceX’s near-term Starship test plans have begun to solidify, offering a clearer picture of what to expect over the next week or two. Pending better weather at its Boca Chica, Texas test facilities, Starship serial number 6 (SN6) is still first in line and has been preparing for its hop debut ever since the prototype completed a Raptor engine static fire test on August 23rd.

Measuring approximately 30m (~100 ft) tall, SN6 is a full-scale Starship tank and engine section – the bottom ~60% and business end of the reusable orbital spacecraft. Of course, SpaceX has a ways to go before Starship is actually ready for its first orbital test flight, let alone reuse after such a test flight, but the company did take its biggest step yet towards that lofty ambitions with Starship SN5’s successful August 4th hop debut.

Effectively twins, Starship SN5 and SN6 have since been expected to take turns completing “several” hops to improve SpaceX’s familiarity with Starship launch operations and work towards a smooth procedure that can be completed multiple times per day. With SN6 now scheduled to hop no earlier than 8am CDT (UTC-5), September 3rd, 29 days after SN5’s debut, SpaceX still has its work cut out for it.

(SpaceX)

Nevertheless, SN5’s 150m (~500 ft) hop was the first flight of any kind for a full-scale Starship prototype, as well as the first use of an entirely new landing leg design and Raptor’s first flight in almost a year. In the history of rocket development, there is no precedent for launching and landing a prototype rocket and then repeating the same test with an entirely new prototype less than a month later.

Additionally, most of the 29 days since SN5’s first hop have been spent preparing Starship SN6 for a crucial “cryo proof” qualification test. Had that cryo proof been completed before SN5’s hop debut, SN6 could have been ready to fly as few as ~10 days later. That still leaves SpaceX a long ways away from multiple Starship hops per day but does offer encouragement that flight-proven Starship SN5 could be ready for its second hop not long after the pad is clear.

Advertisement
-
Starship SN5 awaits its second hop, August 29th. (NASASpaceflight – bocachicagal)

However, it appears that SpaceX instead plans to follow up SN6’s hop debut with a new ‘test tank’ meant to demonstrate an upgraded Starship “thrust puck” built out of a different steel alloy. Known as Starship SN7.1, the test will follow on the heels of a more traditional tank (SN7) that completed a record-breaking pressure test in June 2020 and proved that Starship would likely be better off with a different steel alloy.

While SN7 was a basic test tank (two domes and a few steel rings), SN7.1 adds a skirt section at its base and replaces the aft dome with a thrust dome. Likely built entirely out of a steel alloy closer to 304L than the 301 SpaceX has used for all prior Starship prototypes, that thrust dome features a new ‘thrust puck’ – the structural element Raptor engines attach to and transmit their thrust through.

SN6’s thrust section, June 3rd. (NASASpaceflight – bocachicagal)
SN8’s upgraded thrust section, August 15th. SN7.1’s is believed to be identical and will be tested first. (NASASpaceflight – bocachicagal)
SpaceX has already installed a new launch mount – including a Raptor thrust simulator – for test tank SN7.1. (NASASpaceflight – bocachicagal)

Unlike past single tank tests, SN7.1 will be put through something more like a full prototype’s cryo pressure test. SN7.1 will be installed on a launch mount, allowing its skirt clamps to firmly secure the prototype to the stand, itself secured to a concrete slab on the ground. That launch mount also allows SpaceX to install a hydraulic ram designed to mechanically simulate the thrust of 1-3 Raptor engines without the risk involved in an actual static fire. SN7.1 is scheduled to begin testing no earlier than (NET) 8 am CDT (UTC-5), September 6th – just three days after SN6’s next planned hop attempt.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
TESLARATI MARKETPLACE LIMITED-TIME OFFER

Give the gift of Tesla upgrades.

Shop for someone else or treat yourself. Get more shopping power with a Teslarati gift card.

YOU PAY $250
+
FREE BONUS $75
$325 TOTAL VALUE
Digital gift card delivered by email. Promotional terms apply.
View gift card details →
Comments

News

Tesla Assisted Driving (TAD) lands approval in Italy, its 12th EU country

Published

on

Credit: Tesla

Tesla Assisted Driving (TAD), the European equivalent of the Full Self-Driving suite in the U.S., has officially landed approval to operate in Italy, the 12th European Union country to allow the suite.

Italy marks a huge accomplishment for Tesla’s approval processes in Europe, as it marks the first truly major European country to give an approval.

On November 20, Italy’s Ministry of Transport granted provisional type-approval for Tesla Assisted Driving (TAD), the company’s advanced driver-assistance system. Transport Minister Matteo Salvini announced the decision on X, describing it as “another step forward toward innovation, technology and the mobility of the future, whilst always prioritising public safety.”

The approval followed a thorough technical feasibility assessment and positions Italy as the twelfth European country to authorize the technology, but the first among the European Union’s largest markets.

TAD, previously marketed as FSD (Supervised), will roll out in Italy shortly through an Over-the-Air update and will be available on a subscription basis at €99 per month.

This Italian green light carries substantially greater weight than the preceding approvals. The system first received provisional type-approval from the Netherlands’ RDW in April. Subsequent recognitions came primarily from smaller countries, like Lithuania, Denmark, Belgium, Croatia, Finland, and others.

Italy, by contrast, is the Union’s third-most populous member state and one of the traditional “big four” alongside Germany, France, and Spain. Its urban environments are particularly dense and present a more demanding real-world test for the system than many earlier markets.

The approval also follows a late-October conversation between Elon Musk and Salvini, after which the minister publicly supported a swift EU-level decision. Full bloc-wide authorization requires a qualified majority of at least 15 member states representing 65 percent of the EU population. Italy’s move adds meaningful population weight and political momentum ahead of potential discussions in the Technical Committee on Motor Vehicles.

Tesla marked the occasion with a video of a vehicle navigating Roman streets near the Colosseum, underscoring the system’s ability to handle the city’s distinctive traffic patterns.

For Tesla, the Italian authorization represents a strategic foothold in a major European car market, potentially accelerating both customer adoption and the case for broader regulatory acceptance across the continent.

Continue Reading

News

Tesla Cybercab’s ‘Autonomy Subscription’ covers all bases for a self-driving car

Published

on

Credit: TechOperator | X

Tesla Cybercab is now officially available for personal-use orders to those the company has invited to purchase the car near Austin, Texas.

The two-seat car void of a steering wheel and pedals requires Tesla’s $299 per month “Autonomy Subscription,” as the company has made it abundantly clear that Cybercab “will not operate without an active Autonomy Subscription.”

But what does that entail and why is it included? The Autonomy Subscription seems to cover all bases on both sides, ownership side and Tesla side, to ensure that the vehicle is functional, capable, and free of anything that could put anyone in danger.

The subscription’s core is the subscription to unsupervised autonomous driving within Tesla’s geofences. Owners control the trips through the Tesla app and the 21-inch center touchscreen.

Included features of the Autonomy Subscription:

  • Fully autonomous operation with no steering wheel or pedals (required for the vehicle to function at all).
  • Cellular connectivity, including Premium Connectivity features such as live traffic, media streaming, and Grok.
  • 24/7 remote support available through the app and the vehicle’s touchscreen.
  • Roadside assistance for issues including flat tires, lockouts, and charge depletion, with towing up to approximately 50 miles to a Tesla service center or the owner’s home.
  • Tire inspections, rotations, replacements, and flat tire service.
  • Windshield replacement, cleaning, and water-repellent coating.
  • Wiper blade replacement and cleaning, plus washer fluid refills.
  • Cabin air filter replacements.
  • Exterior camera lens cleaning (including removal of film buildup on the forward-facing camera).
  • Regular vehicle inspections.
  • Unoccupied self-driving to and from Tesla service centers for scheduled work, along with remote diagnostics and app-based service scheduling.

Features are subject to change, and some third-party apps may require separate paid subscriptions. Insurance, registration, charging, parking, and general cleaning are not included.

Tesla also notes that its in-house Insurance is available, but not required for Cyberab.

Ordering screens that have been shared by those lucky enough to receive an invitation to order have revealed some new official specs.

The Cybercab carries an EPA-estimated range of 279 miles and can add up to 123 miles in 15 minutes of Supercharging, but that based on constant 65 mph highway efficiency. Dimensions are 69.0 inches wide, 55.4 inches tall, and 176.2 inches long, with 20.1 cubic feet of cargo space and 100 W USB power delivery. It uses eight exterior cameras plus a cabin camera (with washers on the exterior cameras) and has no side mirrors.

Warranty coverage includes a basic limited warranty of 4 years or 50,000 miles and an 8-year/100,000-mile battery and drive unit warranty guaranteeing at least 70 percent capacity retention.

Currently, it is limited to personal use inside Tesla’s geofences, but Cybercab owners can use them in any of the currently active Robotaxi areas.

Continue Reading

Elon Musk

Elon Musk reveals Tesla’s next vehicle without a steering wheel

Elon Musk says Tesla plans a driverless Model Y for families too big for Cybercab.

Published

on

By

tesla cybercab with no manual controls showing a movie with two employees inside

Tesla is planning a driverless version of the Model Y with room for six or seven people, Elon Musk said this week, giving families and groups an alternative to the two-seat Cybercab. Speaking remotely from China at the New York Times DealBook Summit on Wednesday, Musk said the vehicle would have no steering wheel or pedals. He did not give a launch date, price or production location.

The idea came up when Andrew Ross Sorkin asked whether Tesla would eventually stop selling conventional cars as it shifts Cybertruck capacity toward the Cybercab. Musk defended the two-seat design, saying average occupancy is about 1.2 people per car and that a two-seater covers roughly 90 percent of passenger miles. Bigger groups, he said, would be served by the larger autonomous Model Y.

Sorkin also mentioned he had ordered a Model Y L for his family and was still waiting on it. Musk called the six-seat, long-wheelbase SUV Tesla’s most popular car and suggested all Model Y production might need to move to the longer version. “It’s what most people seem to want,” Musk said, though he did not announce any change to Tesla’s production lines.

A driverless Model Y would add a third vehicle to Tesla’s autonomous lineup. Model Y Robotaxis already run 24 hours a day in eight cities, and Cybercab rides expanded to Dallas on Thursday after launching in Austin in September, as Teslarati reported. Tesla also began inviting select customers to buy a Cybercab for personal use last week at $29,990, with deliveries targeted for December.

Advertisement
-

Musk also addressed whether a Tesla and SpaceX merger should pay out under his compensation plan. Under the change in control terms of his 2025 CEO award, a deal could accelerate vesting, Electrek has noted. Musk said it should not. “I don’t think I should be compensated with any kind of award just for doing a merger. That would be unreasonable and not right,” he said. “You should keep your deals and stay true to your word.”

On the merger itself, Musk said the companies would “probably” be better together because of growing overlap in AI, chips and robotics, but stressed the decision rests with independent committees and shareholders, and that a Tesla vote “may or may not succeed.” Tesla holds its annual shareholder meeting on December 3, with merger talks reportedly progressing toward a possible announcement as soon as December.

Continue Reading