News
Tesla Giga Berlin’s final assembly line takes shape after new approval
Tesla Giga Berlin’s final assembly line is taking shape after the Brandenburg local government gave the automaker preliminary approval to begin installing “machines and aggregates (among other things for the assembly of interior fittings, cockpit, merging of chassis, engine) in the final assembly.”
The Brandenburg Ministry of Agriculture, Environment, and Climate Protection announced earlier today (via @gigafactory_4) that it has granted Tesla preliminary approval to install machines that will put the final aspects of vehicles together. Known as final assembly, this is where vehicles take their final shape. The car’s shape is put together, and the final touches, including interior elements and engines, are installed into the chassis. This is the final step before the vehicles are inspected and approved to be delivered to customers.
#LfU #Brandenburg hat heute heute die Zulassung des vorzeitigen Beginns für den Einbau von Maschinen & Aggregaten (u.a. zur Montage von Inneneinrichtungen, Cockpit, Zusammenführung von Fahrwerk, Motor) in der Endmontage bei #Tesla #GigaBerlin erteilt. pic.twitter.com/VzR16bRdjZ
— MLUK Brandenburg (@MLUKBrandenburg) May 19, 2021
The Tweet says (via Google Translate):
“LFU Brandenburg today granted the approval of the early start for the installation of machines & aggregates (e.g., for the assembly of interior fittings, cockpit, merging of chassis, engine) in the final assembly at Tesla Giga Berlin.”
Documents of the preliminary approval indicated that Tesla will be able to install machinery that relates to Trim, Chassis-Marriage, Final, End of Lind Testing, Glazing Line, Door Line, and Repairs.
Here you can read the content of the 13. preliminary approval for #GigaBerlin in german.https://t.co/UM2scFTxOW pic.twitter.com/B2f1muI1ic
— Giga Berlin / Gigafactory 4 (@gigafactory_4) May 19, 2021
Tesla plans to refine its manufacturing processes at the German plant to be the most accurate in its history. CEO Elon Musk commented yesterday that Tesla would be utilizing “microns not millimeters” as a guideline for the Model Y’s manufacturing, aiming to make the next-generation version of the vehicle the most precise yet.
The installation of the machinery into the plant gives the impression that production testing phases could begin soon. In Texas at Tesla’s Giga Texas facility, the company recently started testing the Giga Press, its massive casting machine that builds a single-piece casting of the Model Y’s rear chassis. Not only does the use of this massive machine help with production efficiency, but also with product rigidity and quality. It removed 69 parts, making the rear casting of the Model Y a single piece.
Tesla Model Y to use one-piece front casting in Germany: report
Tesla stated that it plans to begin limited production at Giga Berlin in late 2021. After Elon Musk visited the factory this week, he commented that he wished there was less bureaucracy in the approval process, but he still plans on production starting at the tail end of the year. Other local officials, like Brandenburg Economic Minister Jörg Steinbach, believe the production could begin soon. Steinbach has said on several occasions, including during an exclusive interview with Teslarati, that he expects the plant to get rolling in late-Summer or early-Autumn. With the approval for equipment to be installed in the plant, there is certainly an argument that Tesla could begin before the end of the year.
What do you think? Let us know in the comments below, or you can email me at joey@teslarati.com or Tweet me @KlenderJoey.
Elon Musk
Elon Musk shares incredible detail about Tesla Cybercab efficiency
Elon Musk shared an incredible detail about Tesla Cybercab’s potential efficiency, as the company has hinted in the past that it could be one of the most affordable vehicles to operate from a per-mile basis.
ARK Invest released a report recently that shed some light on the potential incremental cost per mile of various Robotaxis that will be available on the market in the coming years.
The Cybercab, which is detailed for the year 2030, has an exceptionally low cost of operation, which is something Tesla revealed when it unveiled the vehicle a year and a half ago at the “We, Robot” event in Los Angeles.
Musk said on numerous occasions that Tesla plans to hit the $0.20 cents per mile mark with the Cybercab, describing a “clear path” to achieving that figure and emphasizing it is the “full considered” cost, which would include energy, maintenance, cleaning, depreciation, and insurance.
Probably true
— Elon Musk (@elonmusk) January 22, 2026
ARK’s report showed that the Cybercab would be roughly half the cost of the Waymo 6th Gen Robotaxi in 2030, as that would come in at around $0.40 per mile all in. Cybercab, at scale, would be at $0.20.

Credit: ARK Invest
This would be a dramatic decrease in the cost of operation for Tesla, and the savings would then be passed on to customers who choose to utilize the ride-sharing service for their own transportation needs.
The U.S. average cost of new vehicle ownership is about $0.77 per mile, according to AAA. Meanwhile, Uber and Lyft rideshares often cost between $1 and $4 per mile, while Waymo can cost between $0.60 and $1 or more per mile, according to some estimates.
Tesla’s engineering has been the true driver of these cost efficiencies, and its focus on creating a vehicle that is as cost-effective to operate as possible is truly going to pay off as the vehicle begins to scale. Tesla wants to get the Cybercab to about 5.5-6 miles per kWh, which has been discussed with prototypes.
Additionally, fewer parts due to the umboxed manufacturing process, a lower initial cost, and eliminating the need to pay humans for their labor would also contribute to a cheaper operational cost overall. While aspirational, all of the ingredients for this to be a real goal are there.
It may take some time as Tesla needs to hammer the manufacturing processes, and Musk has said there will be growing pains early. This week, he said regarding the early production efforts:
“…initial production is always very slow and follows an S-curve. The speed of production ramp is inversely proportionate to how many new parts and steps there are. For Cybercab and Optimus, almost everything is new, so the early production rate will be agonizingly slow, but eventually end up being insanely fast.”
Elon Musk
Elon Musk to attend 2026 World Economic Forum at Davos
The Tesla CEO was confirmed as a last-minute speaker for a session with BlackRock CEO Larry Fink.
Elon Musk is poised to attend the 2026 World Economic Forum in Davos. The Tesla CEO was confirmed as a last-minute speaker for a session with BlackRock CEO Larry Fink, signaling a thaw in Musk’s long-strained relationship with the event.
A late addition
Organizers of the World Economic Forum confirmed that Elon Musk was added shortly before the event to a Thursday afternoon session, where he was scheduled to speak with Fink, as noted in a Bloomberg News report. Musk’s upcoming appearance marks Musk’s first participation in the forum, which annually draws political leaders, business executives, and global media to Davos, Switzerland.
Musk’s attendance represents a departure from his past stance toward the event. He had been invited in prior years but declined to attend, including in 2024. His upcoming appearance followed remarks from his political ally, Donald Trump, who addressed the forum earlier in the week with a wide-ranging speech.
A previously strained relationship
Musk had frequently criticized the World Economic Forum in the past, describing it as elitist and questioning its influence. In earlier posts, he characterized the gathering as “boring” and accused it of functioning like an unelected global authority. Those remarks contributed to a long-running distance between Musk and WEF organizers.
The forum previously said Musk had not been invited since 2015, though that position has since shifted. Organizers indicated last year that Musk was welcome amid heightened interest in his political and business activities, including his involvement in the Trump administration’s Department of Government Efficiency (DOGE). Musk later stepped away from that role.
Despite his friction with the World Economic Forum, Musk has remained central to several global events, from SpaceX’s provision of satellite internet services in geopolitically sensitive regions through Starlink to the growing use of xAI’s Grok in U.S. government applications.
News
Tesla states Giga Berlin workforce is stable, rejects media report
As per the electric vehicle maker, production and employment levels at the facility remain stable.
Tesla Germany has denied recent reports alleging that it has significantly reduced staffing at Gigafactory Berlin. As per the electric vehicle maker, production and employment levels at the facility remain stable.
Tesla denies Giga Berlin job cuts report
On Wednesday, German publication Handelsblatt reported that Tesla’s workforce in Gigafactory Berlin had been reduced by about 1,700 since 2024, a 14% drop. The publication cited internal documents as its source for its report.
In a statement to Reuters, Tesla Germany stated that there has been no significant reduction in permanent staff at its Gigafactory in Grünheide compared with 2024, and that there are no plans to curb production or cut jobs at the facility.
“Compared to 2024, there has been no significant reduction in the number of permanent staff. Nor are there any such plans. Compared to 2024, there has been no significant reduction in the number of permanent staff. Nor are there any such plans,” Tesla noted in an emailed statement.
Tesla Germany also noted that it’s “completely normal” for a facility like Giga Berlin to see fluctuations in its headcount.
A likely explanation
There might be a pretty good reason why Giga Berlin reduced its headcount in 2024. As highlighted by industry watcher Alex Voigt, in April of that year, Elon Musk reduced Tesla’s global workforce by more than 10% as part of an effort to lower costs and improve productivity. At the time, several notable executives departed the company, and the Supercharger team was culled.
As with Tesla’s other factories worldwide, Giga Berlin adjusted staffing during that period as well. This could suggest that a substantial number of the 1,700 employees reported by Handelsblatt were likely part of the workers who were let go by Elon Musk during Tesla’s last major workforce reduction.
In contrast to claims of contraction, Tesla has repeatedly signaled plans to expand production capacity in Germany. Giga Berlin factory manager André Thierig has stated on several occasions that the site is expected to increase output in 2026, reinforcing the idea that the facility’s long-term trajectory remains growth-oriented.