News
Tesla Model S Plaid racecar bares its fangs by overtaking hypercars in Laguna Seca
This weekend’s Hypercar Invitational at Laguna Seca was, for the most part, an opportunity for professional racecar driver Randy Pobst and Tesla tuning house Unplugged Performance to test out how their race-spec Model S Plaid performs on the track. The Model S Plaid did not disappoint, and it did not shy away from baring its fangs either. Over the course of the weekend, the modified four-door family sedan overtook some of the world’s most iconic hypercars around one of the world’s most iconic race tracks.
Unplugged Performance is no stranger to Teslas, having been a dedicated tuning house since the days of the Model S P85+. Pobst is no neophyte with Teslas either, finishing Pikes Peak’s Exhibition Class last year in second place in a Model 3 Performance that was rebuilt within days of a major crash. For both Unplugged and Pobst, however, the Model S Plaid, which would be used for this year’s Pikes Peak Hill Climb, proved to be a very pleasant surprise.
-
- Credit: Unplugged Performance/Twitter
-
- Credit: Unplugged Performance/Twitter
-
- Credit: Unplugged Performance/Twitter
The Model S Plaid racecar featured a stock powertrain from Tesla, though its interior was fully stripped out to save weight. A roll cage and a racing seat with six-point seatbelts were placed in the interior as well. Outside, the Model S Plaid was fitted with a massive adjustable rear wing. The vehicle also retained its factory air springs, though it used custom Unplugged Performance/Bilstein dampers and a three-way adjustable rear anti-roll bar. The car also rode on Yokohama Advan slick tires on forged aluminum wheels.
https://twitter.com/TeslaRep/status/1403913191311101956?s=20
Ultimately, the Model S Plaid did not only prove that it was worthy of being on the same track as hypercars like the McLaren P1 and the McLaren Senna; the family sedan showed that it could actually dominate its internal combustion-powered counterparts. This was shown in a video shared online, which featured the Model S Plaid casually overtaking the McLaren Senna and P1 with ease. Later comments from the driver of the McLaren P1 noted that the Model S Plaid was so fast, it almost felt like the other vehicles were standing still.
Watch the plaid model s take over all the cars that lead it initially. It’s a beast on the track. @elonmusk 📸@omg_tesla cc @UnpluggedTesla @RandyPobst @FromWhereICHG pic.twitter.com/gjw1Q4v5Wq
— Tesla Owners Silicon Valley (@teslaownersSV) June 13, 2021
-
But perhaps the most notable observation from both Unplugged and Pobst was just how well the Model S Plaid maintained its power during its laps. At one point, Pobst remarked that the Model S Plaid, which only had 34% charge remaining then, felt just as quick as it did when it still had a full charge. In a statement to Teslarati, Unplugged Performance CEO Ben Schaffer added that the Model S Plaid’s capability to maintain its power despite its battery charge was incredibly impressive.
“With every generation of Tesla, we’ve experienced significant progress in sustainable power delivery and thermal capacity. In simple terms, this means your can drive faster (and) longer. The new Model S Plaid continues this trajectory of improvement, and during our shakedown runs, the car illustrated almost no perceptible power loss as the battery state of charge decreased. Our driver Randy Pobst said the car felt just as fast at 35% SOC as at 100%,” he said.
The Tesla Model S Plaid is poised to take on the Pikes Peak Hill Climb later this year.
Do you have anything to share with the Teslarati Team? We’d love to hear from you, email us at tips@teslarati.com.
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
-
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
-
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
-
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
-
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla Summer Update begins rolling out: a look at the new features
Tesla briefly offered this Robotaxi part for your personal car
