Revel, a New York City-based ridesharing company, will launch its fleet of Tesla Model Y taxis in the Big Apple in early August after a mix-up with NYC’s regulatory agency, the Taxi and Limousine Commission (TLC).
The approval and soon-to-be-launched fleet of Model Y taxis will hit New York City streets on August 2nd, according to Revel executives.
In mid-June, it was reported by several news media outlets that the NYC TLC had successfully blocked the inclusion of Revel’s Tesla Model Y taxis citing a stoppage on issuing new-for-hire taxi licenses for electric cars. However, the story was blown widely out of proportion through what TLC Spokesperson Allan Fromberg called, “a giant game of telephone.” In reality, the City placed a capacity limitation on the number of approved taxi licenses in 2018, halting the issuance of new taxi licenses for all vehicles, not just electric ones.
Tesla Model 3 wins hearts as famed NYC Taxi, picks up where Nissan Leaf couldn’t
Cries of conspiracy floated through the EV community, failing to accept the unfortunate verdict that was placed upon Revel’s all-electric, sustainable fleet of taxi cabs donning the notorious Tesla “T.” However, the TLC has granted Revel 49 licenses, according to Fromberg, covering all but one vehicle in the company’s Model Y fleet.
Of the 49, fifteen have been inspected and approved for operation as early as next week. The New York Daily News, who initially covered the story, said 35 others will roll out when they are inspected and approved for ride-hailing services. The fleet will operate south of 42nd St. in Manhattan, stretching down to the tip of the island. Revel told Teslarati that it will consider growing into other neighborhoods and boroughs once the company has more of an idea of where the fleet is being utilized most frequently.
The company will also open a Superhub in Bed-Stuy, Brooklyn with 25 Level 3 chargers. This will make it the largest universal fast charging depot in the Americas, the company said.
The addition of Revel’s 49 Model Ys broadens New York City’s small fleet of electrified taxis. 120,000 licensed vehicles already navigate through the City’s five boroughs, and there is not room for many more cars. However, the TLC is fully supportive of a transition to electrification, and it expects several agencies to make a more conscious effort toward introducing electric powertrains in the coming years. “The TLC is fully committed to a 100% electrified future, just not at the cost of additional congestion,” Fromberg told Teslarati.
For Revel, it has been a long and drawn-out process. The company’s attempts to gain licenses for its Model Y fleet started in March. After the five-to-one vote that approved the banishment of the EV exemption for taxis, Revel’s already-submitted applications were ultimately approved. A company spokesperson told Tesarati that Revel did not anticipate the approval of the licenses.
Fromberg, who has been the TLC’s Deputy Chief of Public Relations for several years, said that the agency was legally required to review and process Revel’s applications because they were submitted prior to June 25th, three days after the vote took place. “Revel applied for a Base License in the late Spring and submitted applications for electric cars ahead of the June 22nd vote. The Yellow Taxi market is rebounding and ridership has increased steadily since the City’s reopening,” Fromberg told us.
Revel CEO Frank Reig said, “The initial response from the public has been overwhelming, and we can’t wait to start serving New Yorkers who care as much about the City’s future as we do. With our all-electric rideshare fleet and fast-charging Superhub network, we’re investing in a zero-carbon transportation future. We’d like to thank Commissioner Jarmoszuk and the TLC for supporting New York City’s climate goals, and working with us to get the city’s first all-electric, all-employee driven fleet on the road.”
Don’t hesitate to contact us with tips! Email us at tips@teslarati.com, or you can email me directly at joey@teslarati.com.
Elon Musk
Tesla’s golden era is no longer a tagline
Tesla “golden era” teaser video highlights the future of transportation and why car ownership itself may be the next thing to change.
The golden age of autonomous ridesharing is arriving, and Tesla is making sure we can all picture a future that looks like the future. A recent teaser posted to X shows a Cybercab parked outside a home, and with a clear message that your everyday life may soon look like this when the driverless vehicles shows up at your door.
Tesla has begun the rollout of its Robotaxi service across US cities, and the production of its dedicated, fully-autonomous Cybercab vehicle. The first Cybercab rolled off the Giga Texas assembly line on February 17, 2026, with volume production now targeted for this month. Additionally, the Robotaxi service built around it is already running, without human drivers, in US cities.
Tesla Cybercab production ignites with 60 units spotted at Giga Texas
The Cybercab is built without a steering wheel, pedals, or side mirrors, designed from the ground up for unsupervised autonomous operation. Musk described the manufacturing approach as closer to consumer electronics than traditional car production, targeting a cycle time of one unit every ten seconds at full scale.
Drone footage from April 13, 2026 captured over 50 Cybercab units on the Giga Texas campus, with several clustered near the crash testing facility. Musk has noted that Tesla plans to sell the Cybercab to consumers for under $30,000, and owners will be able to add their vehicles to the Tesla robotaxi network when not in personal use, potentially generating income to offset the vehicle’s purchase cost. That model changes the math on vehicle ownership in a meaningful way, making a car something closer to a depreciating asset that can also earn by paying itself off and generate a profit.
During Tesla’s Q4 earnings call, the company confirmed plans to expand the Robotaxi program to seven new cities in the first half of 2026, including Dallas, Houston, Phoenix, Miami, Orlando, Tampa, and Las Vegas. The service already runs without safety drivers in Austin, and public road testing of the Cybercab has expanded to five states, including California, Texas, New York, Illinois, and Massachusetts.
Golden era pic.twitter.com/AS6pX2dK8N
— Tesla Robotaxi (@robotaxi) April 16, 2026
News
Tesla’s last chance version of the flagship Model X is officially gone
The Signature Edition was no ordinary Model X Plaid. Offered exclusively by invitation to select existing Tesla owners, it represented the final production batch of the current-generation Model X before manufacturing at Fremont ends.
Tesla enabled a last-chance version of its two flagship vehicles, the Model S and Model X, over the past few weeks. The Model X, the company’s original SUV, is officially gone.
Tesla has officially closed the book on its most exclusive send-off for the Model X. The limited-run Model X Signature Edition—priced at $159,420 before fees and limited to just 100 units—is now sold out, with reservations closed as of April 16.
The $160,000 Model X Signature Edition is officially sold out.
Reservations are now closed. pic.twitter.com/4D5FSkTZTa
— Sawyer Merritt (@SawyerMerritt) April 16, 2026
The Signature Edition was no ordinary Model X Plaid. Offered exclusively by invitation to select existing Tesla owners, it represented the final production batch of the current-generation Model X before manufacturing at Fremont ends.
Every unit featured an exclusive Garnet Red exterior paint, unique badging, and a standard six-seat configuration. With full Plaid powertrain specs—Tri-Motor All-Wheel Drive, over 1,000 horsepower, and blistering acceleration—it was positioned as a collector’s item for loyalists who wanted one last shot at owning a piece of Tesla history.
The timing is no coincidence.
Tesla announced earlier this year that it would discontinue regular production of both the Model S and Model X to repurpose the Fremont factory’s dedicated lines for mass production of its Optimus humanoid robots.
Elon Musk has repeatedly emphasized that Optimus could ultimately become more valuable to the company than its vehicle business, with ambitions to build hundreds of thousands of units annually.
The Signature Editions served as a final “runout” series: 250 for the Model S and only 100 for the Model X, all built to the highest Plaid specification before the line is converted.
Deliveries of the remaining Signature units are scheduled to begin in May 2026. For buyers who secured one, it’s the ultimate swan song for a vehicle that helped define Tesla’s early luxury EV dominance.
Launched in 2015, the Model X introduced falcon-wing doors, a panoramic windshield, and class-leading performance that turned heads and set benchmarks. While newer models like the Cybertruck and refreshed Model Y have taken center stage, the Model X Plaid remained a halo product for those seeking maximum range, space, and speed in an SUV package.
With inventory of standard Model X units already nearly exhausted across the U.S., the rapid sell-out of the Signature Edition underscores enduring demand for Tesla’s premium flagships even as the company pivots toward robotics and autonomy.
For enthusiasts, these 100 garnet-red SUVs will likely become instant collector’s items—tangible reminders of the vehicles that built the brand before Tesla’s next chapter fully begins. The last chance is gone, but the legacy endures.
Elon Musk
Tesla Optimus V3 hand and arm details revealed in new patents
Two new patents, which were coincidentally filed on the same day as the “We, Robot” event back in October 2024, protect Tesla’s mechanically actuated, tendon-driven architecture.
Tesla is planning to soon reveal its latest and greatest version of the Optimus humanoid robot, and a series of new patents for the hands and arms, with the former being, admittedly, one of the most challenging parts of developing the project.
Two new patents, which were coincidentally filed on the same day as the “We, Robot” event back in October 2024, protect Tesla’s mechanically actuated, tendon-driven architecture.
The designs relocate heavy actuators to the forearm, route cables through a sophisticated wrist design, and employ innovative joint assemblies to achieve human-like dexterity while enabling lightweight construction and high-volume manufacturing.
Core Tendon-Driven Hand Architecture
The primary patent, which is titled “Mechanically Actuated Robotic Hand,” details a cable/tendon-driven system.
Actuators are positioned in the forearm rather than the hand. Each finger features four degrees of freedom (DoF), while the wrist adds two more.
Tesla’s Optimus V3 robot hand looks to have been revealed in a new international patent published today.
The patent describes a tendon/cable-driven hand:
• Actuators in the forearm
• Each finger has 4 degrees of freedom
• The wrist has 2 degrees of freedom
• Tendon-driven… pic.twitter.com/eE8xLEYSrx— Sawyer Merritt (@SawyerMerritt) April 16, 2026
Three thin, flexible control cables (tendons) per finger extend from the forearm actuators, pass through the wrist, and connect to the finger segments. Integrated channels within the finger phalanges guide these cables selectively—routing behind some joints and forward of others—to enable independent bending without unintended motion.
Patent diagrams illustrate thick cable bundles emerging from the wrist into the palm and fingers, with labeled pivots and routing guides. This setup closely mirrors human forearm-muscle and tendon anatomy, where most hand control originates proximally.
Advanced Wrist Routing Innovation
One of the standout features is the wrist’s cable transition mechanism. Cables shift from a lateral stack on the forearm side to a vertical stack on the hand side through a specialized transition zone.
Boom! @Tesla_Optimus 의 3세대 구조로 추정되는, 로봇 팔 및 관절에 대한 특허가 공개되었습니다.
아티클 작업에 들어가겠습니다.
1년 넘게 기다려 온, 정말 귀한 특허인데, 조회수 100만대로 터져줬으면 좋겠네요. 😉@herbertong @SawyerMerritt@GoingBallistic5 @TheHumanoidHub pic.twitter.com/CCEiIlMFSX
— SETI Park (@seti_park) April 16, 2026
This geometry significantly reduces cable stretch, torque, friction, and crosstalk during combined yaw and pitch wrist movements — common failure points in simpler tendon systems that cause imprecise or jerky motion.
By minimizing these issues, the design supports smoother, more reliable multi-axis wrist operation, essential for complex real-world tasks.
Companion Patents on Appendage and Joint Design
Two supporting patents provide additional depth. “Robotic Appendage” covers the overall forearm-to-palm-to-finger assembly, with a palm body movably coupled to the forearm and finger phalanges linked by tensile cables returning to forearm actuators. Tensioning these cables repositions the phalanges precisely.
“Joint Assembly for Robotic Appendage” describes curved contact surfaces on mating structures paired with a composite flexible member. This allows smooth pivoting while maintaining consistent tension, enhancing durability, and simplifying assembly for mass production.
Executive Insights on Hand Development Challenges
Tesla executives have consistently described the hand as the most difficult component of Optimus.
Elon Musk has called it “the majority of the engineering difficulty of the entire robot,” emphasizing that human hands possess roughly 27–28 DoF with an intricate tendon network powered largely by forearm muscles. He has likened the challenge to something “harder than Cybertruck or Model X… somewhere between Model X and Starship.”
In mid-2025, Musk acknowledged that Tesla was “struggling” to finalize the hand and forearm design. By early 2026, he stated that the company had overcome the “hardest” problems, including human-level manual dexterity, real-world AI integration, and volume production scalability.
He estimated the electromechanical hand represents about 60 percent of the overall Optimus challenge, compounded by the lack of an existing supply chain for such precision components.
These patents directly tackle the acknowledged pain points: relocating actuators reduces hand mass and inertia for better speed and efficiency; advanced wrist routing and joint geometry address friction and crosstalk; and simplified, stackable parts visible in the diagrams indicate readiness for high-volume manufacturing.
Implications for Optimus Production and Leadership
Collectively, the patents portray the Optimus v3 hand not as a mere prototype, but as a production-oriented system engineered from first principles.
The 22-DoF architecture, forearm-driven tendons, and crosstalk-minimizing wrist deliver a clear competitive edge in dexterity. They align with Musk’s view that high-volume manufacturing is one of the three critical elements missing from most other humanoid projects.
For Optimus to become the most capable humanoid robot, its hand needed to replicate the useful and applicable design of the human counterpart.
These filings demonstrate that Tesla has transformed years of engineering challenges into patented, elegant solutions — positioning the company strongly in the race toward general-purpose robotics.
Tesla’s golden era is no longer a tagline
Tesla’s last chance version of the flagship Model X is officially gone
