News
Tesla Model S Plaid returns to Nürburgring with active rear spoiler and ‘Track Pack’
Tesla’s insane Model S Plaid active spoiler has been spotted at the Nürburgring racetrack in Germany. Tesla has been attempting to break its own lap record at the raceway, which it set on September 9th.
Teslarati caught exclusive photos of the Model S Plaid’s active spoiler at the Ring earlier today. Tesla has been at the Nürburgring since August, testing and pushing the limits of the Model S Plaid, the world’s fastest production vehicle. CEO Elon Musk confirmed on September 9th that the Model S Plaid had officially broken the record at the track, nicknamed the Green Hell due to its treacherous course surrounded by thick forestry, with a time of 7:30.909. The vehicle used to set that time was unmodified and was shipped directly to Germany from Tesla’s Fremont factory.
On the Model S spotted by Teslarati earlier today is an active rear spoiler, which improves aerodynamic performance, including downforce in corners and speed. The spoiler can be adjusted to different angles, allowing the car to run with variable settings to see which would be best for a high-speed run.
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
Tesla was testing three Model S Plaid units in total: Deep Blue Metallic with the active spoiler and one Red Multi-Coat and a Solid Black. The Red and Black Model S Plaids spotted at the track were not fitted with the active spoiler. Additionally, the Blue and Red Model S Plaid units were also equipped with drilled brakes, allowing harder and faster braking, fitting for a performance setting. Tesla is likely benchmarking the Model S Plaids against one another to see which modifications are providing the most improvements in speed, braking, downforce, and aerodynamics. This will give Tesla the most effective data in determining which settings will create the fastest car.
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
In typical Tesla fashion, the company is not satisfied with just holding a record. It is constantly looking to improve upon perfection, especially when some of the world’s most renowned automakers are frequently at the Nürburgring looking to break speed records and lap times. While the Model S Plaid in stock form holds the track record at the raceway, competitors will have an even more difficult time catching up to Tesla as it has brought modifications that could be a part of an aforementioned “Track Pack” to Germany to drive in its domination even further.
Tesla CEO Elon Musk stated just after the record-setting run at the Ring in September that the automaker would be modifying a Plaid Model S for future runs. Musk said, “Next will be modified Plaid with added aero surfaces, carbon brakes & track tires (all things that can be done without Tesla being in the loop.” Musk was likely referring to the active spoiler and the noticeable front splitter when mentioning added aero surfaces. Brakes and track tires are also being equipped by Tesla here to improve performance.
-
- Credit: Teslarati
-
- Credit: Teslarati
-
- Credit: Teslarati
The Tesla active spoiler on the Model S Plaid was first spotted in May 2021 while the company was testing multiple vehicle units at the Laguna Seca Raceway in California.
-
Don’t hesitate to contact us with tips! Email us at tips@teslarati.com, or you can email me directly at joey@teslarati.com.
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
-
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
-
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
-
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
-
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla unlocks in-car web conferencing to extend Google Meet, Teams and beyond
Tesla Summer Update begins rolling out: a look at the new features
