News
SpaceX’s Starbase environmental review is inches from the finish line
Update: Just two days after the FAA’s latest delay announcement, an online portal documenting SpaceX’s Starbase environmental assessment progress has been updated to show that the last step requiring “interagency consultations” was completed on June 2nd.
In theory, that means that to successfully complete its Programmatic Environmental Assessment (PEA) for orbital Starship launches, SpaceX merely needs to incorporate all recommendations, requirements, or mitigations added during the interagency review process into one final draft and presumably secure the approval of all relevant stakeholders one last time. Once those documents are complete, approved, and published, all Starbase will need to begin orbital Starship test flights is an FAA launch license.
Securing that launch license is its own can of worms with plenty of unique challenges, but it’s highly unlikely that SpaceX and the FAA won’t be able to come to some kind of agreement allowing the company to begin those test flights within a month or two of receiving a good environmental review. According to the FAA, the final results of the Starbase PEA are scheduled to be released on June 13th.
The US Federal Aviation Administration says that its environmental review of SpaceX’s plan to conduct orbital Starship launches out of South Texas has been delayed for the fifth time in five months.
However, despite the chronic delays and the FAA’s odd decision to announce a new delay every month instead of simply acknowledging that it doesn’t know when the process will be finished, there are now even more reasons to expect a positive outcome.
Even though there were attempts to spin the new information into something negative, a document acquired through the Freedom Of Information Act (FOIA) by Bloomberg revealed that the US Fish and Wildlife Service (FWS) had decided to approve its portion of the Starbase environmental review. Their only condition: that SpaceX implement a few small mitigation measures, “including contracting with a qualified biologist to conduct monitoring of vegetation and birds, operating an employee shuttle between the launch facility site and nearby town of Brownsville, reducing vehicle traffic, and adjusting lights to minimize the impact on sea turtles.” Bloomberg chose not to publish the documents it received through the FOIA process.
In the same set of documents, the FWS also revealed that SpaceX has removed a request for permission to build a small desalination plant, a natural gas production and liquefaction plant, and a natural gas power plant at or near Starbase’s launch site from Starbase’s first Programmatic Environmental Assessment (PEA). That change comes as little surprise. In fact, SpaceX’s decision to pursue a “programmatic” assessment instead of a more common standalone assessment means that the company will be able to pursue additions to a basic Starbase environmental approval without having to rebuild the foundation each time.
In this case, a “basic approval” would mean the ability to conduct at least a few orbital Starship launches per year. Once that foundation is secured, SpaceX should be able to tier new environmental assessments on top of it and pursue permission for a desalination plant, natural gas production, more annual launches, or any other additions that might benefit Starbase. The simpler the foundation, the harder it should be for environmental stakeholders and agencies to protest or prevent SpaceX from receiving a good outcome.
“The FAA now plans to release the Final PEA on June 13, 2022 to account for ongoing interagency consultations concerning Section 4(f) of the Department of Transportation Act. All other consultations and analysis have been completed at this time.”
Another cause for optimism: after four delays of one or two months, the FAA’s latest delay announcement only pushes the conclusion of the review from May 31st to June 13th. Additionally, the FAA confirmed that only one small component of the entire review remains unfinished. Every other major component has been completed successfully and will likely result in a Finding Of No Significant Impact (FONSI) or Mitigated FONSI that would greenlight the environmental side of conducting orbital Starship launches out of Boca Chica, Texas.
When the draft PEA was first published, the FAA noted several points of contention over Section 4(f) compliance, which is designed to “protect significant publicly owned public parks, recreation areas, and wildlife and waterfowl refuges, as well as significant historic sites, whether they are publicly or privately owned.” At the time, the main problem was SpaceX’s request to close the public Boca Chica Beach and the only highway to it for up to 500 hours (~42 days), as well as a contingency that would allow for another 300 hours of closures to safely respond to emergencies.
Thanks to an even more in-depth environmental impact statement (EIS) completed in 2014 for a Falcon 9 and Falcon Heavy launch pad where Starship’s launch site now stands, we know that SpaceX has already met Section 4(f) demands with a plan for up to 180 hours of road closures per year. In the absolute worst-case scenario, SpaceX should be able to drastically reduce its road closure request to satisfy the Department of Transportation. Subsisting on roughly 20-30 days of closures per year would undoubtedly maim Starbase’s utility but it would at least allow SpaceX to conduct a few basic orbital test flights and some limited ground testing while it rapidly redirects most of its effort to finishing alternative Starship production and launch facilities in Florida.
Regardless, it’s now quite likely that SpaceX’s Starbase environmental review will finally be over by the end of June, freeing up the FAA and SpaceX to focus fully on the launch license side of the equation. Meanwhile, SpaceX still has weeks or even months of work ahead of it to prepare a Starship and Super Heavy pair for their first orbital launch attempt, so (for now) there is no risk of the company being forced to sit around and wait for the gears of bureaucracy to turn.
News
Tesla hints at Starlink integration with recent patent
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
Tesla hinted at a potential Starlink internet terminal integration within its vehicles in a recent patent, which describes a vehicle roof assembly with integrated radio frequency (RF) transparency.
The patent, which is Pub. No U.S. 2025/0368267 describes a new vehicle roof that is made of RF-transparent polymer materials, allowing and “facilitating clear communication with external devices and satellites.”
Tesla believes that a new vehicle roof design, comprised of different materials than the standard metallic or glass elements used in cars today, would allow the company to integrate modern vehicular technologies, “particularly those requiring radio frequency transmission and reception.
Tesla has recently filed a US patent application on integrating RF transparent materials into the roof structure.
“facilitating clear communication with external devices and satellites”
Tesla fleet is getting @Starlink connectivity integration soon. LFG @Tesla @elonmusk… pic.twitter.com/bLa8YtPLd1
— Chansoo Byeon (@Chansoo) December 9, 2025
Instead of glass or metallic materials, Tesla says vehicles may benefit from high-strength polymer blends, such as Polycarbonate, Acrylonitrile Butadiene Styrene, or Acrylonitrile Styrene Acrylate.
These materials still provide ideal strength metrics for crashworthiness, stiffness for noise, vibration, and harshness control, and are compliant with head impact regulations.
They would also enable better performance with modern technologies, like internet terminals, which need an uninterrupted signal to satellites for maximum reception. Tesla writes in the patent:
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
One of the challenges Tesla seems to be aware of with this type of roof design is the fact that it will still have to enable safety and keep that at the forefront of the design. As you can see in the illustration above, Tesla plans to use four layers to increase safety and rigidity, while also combating noise and vibration.
It notes in the patent that disclosed examples still meet the safety requirements outlined in the Federal Motor Vehicle Safety Standards (FMVSS).
Starlink integrated directly into Tesla vehicles would be a considerable advantage for owners. It would come with a handful of distinct advantages.
Initially, the inclusion of Starlink would completely eliminate cellular dead zones, something that is an issue, especially in rural areas. Starlink would provide connectivity in these remote regions and would ensure uninterrupted service during road trips and off-grid adventures.
It could also be a critical addition for Robotaxi, as it is crucial to have solid and reliable connectivity for remote monitoring and fleet management.
Starlink’s growing constellation, thanks to SpaceX’s routine and frequent launch schedule, will provide secure, stable, and reliable internet connectivity for Tesla vehicles.
Although many owners have already mounted Starlink Mini dishes under their glass roofs for a similar experience, it may be integrated directly into Teslas in the coming years, either as an upgrade or a standard feature.
News
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla has surprised some owners by sneaking in a new Full Self-Driving version with the wide release of the Holiday Update, which started rolling out to Hardware 4 owners on Friday night.
Tesla has issued a controlled and very slow release pattern with the Holiday Update, which rolls out with Software Version 2025.44.25.5.
For the past two weeks, as it has rolled out to Hardware 3 and older Tesla owners, the company has kept its deployment of the new Software Version relatively controlled.
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla Full Self-Driving v14.2.1.25 made its first appearance last night to Hardware 4 owners who are members of the Early Access Program (EAP). It appears to be a slight refinement from FSD v14.2.1, which has been out for a couple of weeks.
Tesla v2025.44.25.5 Holiday update incoming
Also Full Self-Driving v14.2.1.25!!! pic.twitter.com/74D7S0UGXz
— TESLARATI (@Teslarati) December 13, 2025
Many owners welcome the new FSD version, us included, because we’ve been less than impressed with v14.2.1. We have experienced some minor regressions with v14.2.1, especially with Speed Limit recognition, Speed Profile tinkering, and parking performance.
As it stands, Full Self-Driving is still particularly impressive, but Tesla is evidently having an issue with some of the adjustments, as it is still refining some of the performance aspects of the suite. This is expected and normal with some updates, as not all of them are an improvement in all areas; we routinely see some things backtrack every once in a while.
This new FSD version is likely to take care of those things, but it also includes all of the awesome Holiday Update features, which include:
- Grok with Navigation Commands (Beta) – Grok will now add and edit destinations.
- Tesla Photobooth – Take pictures inside your car using the cabin-facing camera
- Dog Mode Live Activity – Check on your four-legged friend on your phone through periodic snapshots taken of the cabin
- Dashcam Viewer Update – Includes new metrics, like steering wheel angle, speed, and more
- Santa Mode – New graphics, trees, and a lock chime
- Light Show Update – Addition of Jingle Rush light show
- Custom Wraps and License Plates – Colorizer now allows you to customize your vehicle even further, with custom patterns, license plates, and tint
- Navigation Improvements – Easier layout and setup
- Supercharger Site Map – Starting at 18 pilot locations, a 3D view of the Supercharger you’re visiting will be available
- Automatic Carpool Lane Routing – Navigation will utilize carpool lanes if enabled
- Phone Left Behind Chime – Your car will now tell you if you left a phone inside
- Charge Limit Per Location – Set a charge limit for each location
- ISS Docking Simulator – New game
- Additional Improvements – Turn off wireless charging pad, Spotify improvements, Rainbow Rave Cave, Lock Sound TRON addition
Tesla also added two other things that were undocumented, like Charging Passport and information on USB drive storage to help with Dashcam.
Tesla is updating Cybertruck owners on its timeline of a massive feature that has yet to ship: Powershare with Powerwall.
Powershare is a bidirectional charging feature exclusive to Cybertruck, which allows the vehicle’s battery to act as a portable power source for homes, appliances, tools, other EVs, and more. It was announced in late 2023 as part of Tesla’s push into vehicle-to-everything energy sharing, and acting as a giant portable charger is the main advantage, as it can provide backup power during outages.
Cybertruck’s Powershare system supports both vehicle-to-load (V2L) and vehicle-to-home (V2H), making it flexible and well-rounded for a variety of applications.
However, even though the feature was promised with Cybertruck, it has yet to be shipped to vehicles. Tesla communicated with owners through email recently regarding Powershare with Powerwall, which essentially has the pickup act as an extended battery.
Powerwall discharge would be prioritized before tapping into the truck’s larger pack.
However, Tesla is still working on getting the feature out to owners, an email said:
“We’re writing to let you know that the Powershare with Powerwall feature is still in development and is now scheduled for release in mid-2026.
This new release date gives us additional time to design and test this feature, ensuring its ability to communicate and optimize energy sharing between your vehicle and many configurations and generations of Powerwall. We are also using this time to develop additional Powershare features that will help us continue to accelerate the world’s transition to sustainable energy.”
Owners have expressed some real disappointment in Tesla’s continuous delays in releasing the feature, as it was expected to be released by late 2024, but now has been pushed back several times to mid-2026, according to the email.
Foundation Series Cybertruck buyers paid extra, expecting the feature to be rolled out with their vehicle upon pickup.
Cybertruck’s Lead Engineer, Wes Morrill, even commented on the holdup:
As a Cybertruck owner who also has Powerwall, I empathize with the disappointed comments.
To their credit, the team has delivered powershare functionality to Cybertruck customers who otherwise have no backup with development of the powershare gateway. As well as those with solar…
— Wes (@wmorrill3) December 12, 2025
He said that “it turned out to be much harder than anticipated to make powershare work seamlessly with existing Powerwalls through existing wall connectors. Two grid-forming devices need to negotiate who will form and who will follow, depending on the state of charge of each, and they need to do this without a network and through multiple generations of hardware, and test and validate this process through rigorous certifications to ensure grid safety.”
It’s nice to see the transparency, but it is justified for some Cybertruck owners to feel like they’ve been bait-and-switched.
Tesla hints at Starlink integration with recent patent
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
