News
SpaceX Falcon 9 rocket completes 57th operational Starlink launch
For the 57th time, a SpaceX Falcon 9 rocket has delivered a batch of operational Starlink satellites to low Earth orbit, simultaneously marking the vehicle’s 50th successful launch in 367 days.
Flying for the 7th time, Falcon 9 booster B1063 lifted off with a fresh upper stage and another batch of Starlink V1.5 satellites enclosed in a reused payload fairing at 10:40 pm PDT (05:40 UTC), Tuesday, August 30th. SpaceX’s 57th overall Starlink launch, Starlink 3-4 deployed another 46 satellites into a semi-polar sun-synchronous orbit (SSO), where they will eventually be joined by approximately 520 other spacecraft.
Around nine minutes after liftoff, Falcon 9’s expendable upper stage reached a stable parking orbit and booster B1063 touched down on drone ship Of Course I Still Love You (OCISLY) – SpaceX’s 65th consecutively successful landing and 139th successful landing overall. Falcon 9 launched for the first time in June 2010 and completed its first landing in December 2015.
Starlink 3-4 was also SpaceX’s 148th consecutively successful Falcon 9 launch, the rocket’s 172nd successful launch overall, and the company’s 50th launch in just over a year.
SpaceX began filling out Starlink’s third orbital shell (Group 3) in July 2021. Four launches and seven weeks later, more than half (184) of the shell’s 348 planned satellites are already in orbit, though most of those satellites still need another month or two to reach operational altitudes. The fifth shell of SpaceX’s first Starlink constellation – populated by another 172 satellites – will eventually be assembled in an almost identical sun-synchronous orbit. Orbiting Earth at an inclination of 97.6 degrees, where 90 degrees would be a perfect polar orbit, Starlink’s SSO satellites will help fill coverage gaps all over the world, but they will be particularly optimal for serving customers at high latitudes – including the Arctic and Antarctic.
Once the constellation’s orbital laser link network is activated, Starlink will even be able to connect customers beyond the reach of the network’s ground stations by routing communications through other satellites until a station is in range. That could be a boon for ultra-remote outposts like those in Antarctica, where the brutal weather, sheer scale of the continent, and small number of residents make it hard to rationalize ground station construction. Semi-polar satellites like those SpaceX launched today will eventually enable a more economical solution.
Following Starlink 3-4, SpaceX now has more than 2900 working Starlink satellites in orbit, representing about 66% of the full 4408-satellite constellation. Astrophysicist Jonathan McDowell estimates that almost 2400 – more than half of the final constellation – have reached operational orbits and are serving customers back on Earth. SpaceX began operational Starlink launches less than three years ago (November 2019). Per FCC regulations, the company was required to launch half of the constellation by March 2024 and finish launching all 4408 satellites by March 2027.
-
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla unlocks in-car web conferencing to extend Google Meet, Teams and beyond
Tesla Summer Update begins rolling out: a look at the new features
