Connect with us

News

Kimbal Musk trolls Fox with ‘Plant a Seed Day’ in exchange about Tesla’s new chair

[Credit: Fox Business Network/YouTube]

Published

on

It appears that the art of trolling runs deep between the Musk brothers. While Elon Musk is known to troll on Twitter from time to time, the trolling chops of Kimbal Musk have mostly been untapped. That is, of course, until recently, when Kimbal ended up aggravating Fox Business Network host Stuart Varney by trolling him with a barrage of plugs for “Plant a Seed Day,” an initiative from his nonprofit, Big Green, that aims to encourage American families to plant a seed on March 20, 2019.

During the amusing segment, the Fox Business host attempted to ask Kimbal about Robyn Denholm’s activities as Tesla’s new chair. Denholm, who has been with the board since 2014, and who has experience in both tech and auto companies as a finance executive, was named earlier this month as a replacement for the outgoing Elon Musk, who was forced to vacate his Chairman post as part of his settlement with the SEC. Denholm’s appointment was widely supported by Elon Musk and Tesla’s supporters, who noted that he was looking forward to working closely with the finance veteran.

It did not take long before Denholm’s appointment attracted some creative speculations among Tesla’s critics. Headlines such as “Tesla’s New Chair Is Part of the Furniture,” “Tesla’s New Chair Won’t Do Much to Rein In Elon Musk,” and “Taming Elon Musk: New Tesla chair, board members face a tough job” have been prevalent since Denholm’s appointment, suggesting that there might be a certain degree of conflict between Musk and the new chair as she attempts to keep the CEO in line.

Varney’s questions towards Kimbal Musk during the short-lived interview suggest that he was traversing a similar line. “Look, Kimbal, you are on the board at Tesla. And you’ve got a new chair. Have you heard anything from her? You’ve got to tell me, is she laying down the law? Have you had contact with her? What’s she saying? What’s she doing on the board?” the Fox Business host asked.

Kimbal Musk, for his part, proved immovable, simply stating that he was “so happy for the future of Tesla.” He also mentioned Plant a Seed Day on March 20, 2019, where his nonprofit, Big Green, aims to get a million American families to plant a seed in their backyards. During the course of the brief interview, Kimbal plugged Plant a Seed Day five times, much to the chagrin of the Fox Business host.

A visibly upset Varney eventually decided to throw in the towel, saying “You think my viewers want to learn about plant a seed day? Do you really? They don’t care, Kimbal. They don’t care!” Kimbal, for his part, continued plugging Plant a Seed Day, stating that the event is “going to be awesome.” At that point, Varney opted to cut the interview.

Advertisement
-

“Okay, okay. I’m wrapping it up, I’m sorry. Wait a minute, I am responsible to my audience. I’m sorry it’s over. I will not be used,” Varney said, visibly aggravated.

Plant a Seed Day is being coordinated by Big Green, Kimbal Musk’s nonprofit whose mission is to promote and foster a healthy food lifestyle for America’s schoolchildren. A centerpiece of Big Green’s initiatives is the Learning Garden, which are modular gardens that are set up in schools where children could plant and harvest crops. In a blog post on Medium, Kimbal noted that Plant a Seed Day is working with “national and international distribution, brand, and sponsorship partners” to get over 1 million seeds to families for March 20, 2019.

“At Big Green, when my team works with a new Learning Garden school, we encourage teachers to have their students draw out their dream garden. It’s one of my favorite activities because this is when the magic begins. Kids will draw unicorns watering tomato plants, banana trees growing next to their school, or plants that talk, walk, and water themselves. The creativity and energy put toward creating a dream garden is endless. Soon the children realize the real magic of a garden is in planting a seed, watering it, caring for it, and watching it grow.

“Planting a seed is the first and powerful step to making a big change in food education. We have seen this critical step taken thousands of times in the schools we work with through Big Green. On March 20, 2019 we will bring those magical moments to millions of children.”

To learn more about Plant a Seed Day, click here.

Watch Kimbal Musk’s short-lived interview with Fox Business below.

Advertisement
-

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Investor's Corner

Tesla has a Cybercab problem nobody saw coming

Tesla’s Cybercab line now builds robotaxis faster than Tesla can deploy them, Lars Moravy says.

Published

on

By

Tesla’s Cybercab line in Texas can now build the two seat robotaxi faster than the company can put it into service, according to Lars Moravy, Tesla’s Vice President of Vehicle Engineering. “We don’t run every day because the line can run so fast. It’s currently outpacing our deployments,” Moravy said in a new Cybercab deep dive from Munro Live. “So, it’s a bit of a race right now. Who’s going to go faster? Right now the manufacturing line’s ahead.”

Tesla’s official Robotaxi account shared a Cybercab analysis video on X on Monday, calling it a “Cybercab engineering deep dive.” Moravy’s comments go further than what he told analysts on the Q3 earnings call last week, when he said the Cybercab line’s listed capacity of more than 125,000 units a year undersells what it can actually run.

The tour shows where that speed comes from. Tesla’s unboxed process splits the Cybercab into front, rear, side and center modules that are built and tested on their own before they meet on a short final line. That final line has just 25 fully automated stations, which Tesla’s team estimated is a fifth to a tenth of what a Model Y needs. The full line is about 78% automated, the framing line is already at 100%, and the layout uses roughly 50% less floor space per vehicle. The stated goal is “100% automation in 10 second cycle time,” or one finished Cybercab every 10 seconds.

Tesla also deleted the paint shop. Only the side modules are coated, and the exterior panels get their color inside the molding machine. Engineers said the car is designed to run at least 500,000 miles, which matters for a vehicle that will spend most of its day carrying riders.

The battery got the same treatment. The Cybercab uses an 88S6P pack of 4680 cells in a steel enclosure, a first for Tesla, with each module potted separately so a single failed module can be swapped instead of the whole pack. Wireless battery management boards replace a wiring harness, and new contactors are fast enough to drop the pyro fuse entirely. Tesla’s battery director graded the pack an A minus, compared with a D for the Model Y structural pack and a B minus for Cybertruck. Up front, the drive unit runs an 11:1 gear ratio versus roughly 9:1 on most Teslas, since the Cybercab does not need a high top speed.

Advertisement
-

The deployment side is now the bottleneck Moravy described. Tesla had more than 50 Cybercabs working the Formula 1 weekend in Austin, and Texas records show 463 Cybercabs registered. Tesla said on its earnings call that Cybercab service will launch in Dallas next month, and Moravy said the company is aiming to get Cybercabs to customers by the end of 2026. Every unit built so far has gone into Tesla’s own fleet since the line moved into volume production in April.

Munro Live also asked when it could get a Cybercab to tear down. Tesla’s answer: “Not yet.”

Continue Reading

Elon Musk

How SpaceX Is raising Raptor’s sea-level thrust while holding engine mass steady

Published

on

Credit: SpaceX

SpaceX’s Raptor engine family has steadily increased sea-level thrust while simultaneously reducing mass, turning iterative engineering gains into substantially higher performance for the Super Heavy booster. CEO Elon Musk shed more light on how powerful Raptor 4 will be, and it’s pretty crazy.

Raptor 1 delivered 185 metric tons of thrust at roughly 2,080 kilograms, while Raptor 2 raised that to 230 tons while cutting mass to about 1,630 kilograms. SpaceX data for Raptor 3 lists a target of 280 tons at 1,525 kilograms (with further reductions in associated vehicle hardware), while operational flight ratings have been cited near 250 tons.

This morning, Elon Musk stated that Raptor 4 is expected to reach 300 tons of sea-level thrust at roughly the same mass as Raptor 3. Across these versions, thrust has risen by more than 60 percent from the first engines while engine mass has fallen, producing a sharp improvement in thrust-to-weight ratio. This is a true testament to how great SpaceX engineering has been:

With 33 engines on SuperHeavy, the jump from earlier versions to a 300-ton Raptor 4 would produce roughly 9,900 metric tons of total liftoff thrust, nearly three times the Saturn V’s approximately 3,400 metric tons from its five F-1 engines.

This is not just a larger number on a data sheet, either, as sea-level thrust is the force available the moment the vehicle leaves the pad. This is when it is heaviest and still deep in Earth’s gravity well and dense atmosphere.

Higher levels of sea-level thrust directly improves the initial thrust-to-weight ratio of the full stack. A higher ratio produces faster acceleration off the pad, which shortens the time the rocket has to spend fighting gravity, and gravity losses during the first minute or two of the flight are a major drain on total available delta-v. Every second shaved off of that early climb preserves more propellant energy for reaching orbital velocity or for carrying extra payload.

Because Super Heavy’s engine count is constrained by vehicle diameter and packing density, increasing thrust per engine is the most straightforward way to raise total liftoff performance without redesigning the booster structure or design.

The same-mass target for Raptor 4 is equally important. Holding engine mass roughly constant while raising thrust improves the engine’s own thrust-to-weight ratio and reduces the structural and propellant mass fraction that must be carried solely to support the engines.

Earlier Raptor iterations also simplified or eliminated extensive vehicle-side hardware such as heat shields. These gains compound: more force for less installed mass leaves additional capacity for propellant, payload, or operational margins such as engine-out capability.

For Starship’s architecture, the practical effects are large. Greater liftoff thrust supports heavier vehicles, larger propellant loads, and higher payloads to low Earth orbit, figures SpaceX has targeted in the 100-plus-ton reusable range. That capacity underpins orbital refueling, lunar missions, and eventual Mars cargo and crew flights.

Continued growth in sea-level thrust therefore tightens the gap between theoretical rocket performance and the high flight rates and reusability needed to make large-scale space transport practical.

Continue Reading

News

Tesla Assisted Driving expands to tenth EU country

Published

on

Tesla has expanded its Tesla Assisted Driving (TAD) suite to its tenth European country, as Latvia joined a growing list of European Union member states authorizing the company’s advanced driver assistance technology.

Tesla Europe announced this morning that the system is now approved in Latvia, with a software rollout to begin soon.

The approval and rollout follow recognition of a provisional European type approval originally granted by the Netherlands’ RDW authority on April 10.

Latvia’s Road Traffic Safety Directorate (CSDD) evaluated the Dutch documentation, coordinated with the other national authorities, and reviewed updates from Tesla. These included tightened limits on speed offsets, automatic resets of any manual speed adjustments after each trip, and stronger driver monitoring.

In Europe, the feature is marketed as Tesla Assisted Driving after a recent rule change that labeled the name “Full Self-Driving” as misleading.

Tesla starts showing how FSD will change lives in Europe

The system remains an SAE Level 2 driver assistance tool, not unsupervised autonomy. It can control speed, steering, braking, lane changes, and intersections while following a navigation route. Drivers need not keep their hands on the wheel at all times, yet they must continuously monitor the road and be prepared to intervene immediately.

The sequence of EU recognitions began with the Netherlands in April and continued through Lithuania, Estonia, Denmark, Belgium, Slovenia, Czechia, Croatia, and Slovakia. Most have relied on mutual recognition of the single Dutch provisional approval rather than independent national testing.

These national clearances do not yet constitute bloc-wide authorization. An EU-wide decision requires a qualified majority in the Technical Committee on Motor Vehicles: at least 15 of 27 member states representing 65 percent of the EU population. Larger markets, like Germany, France, and Italy, remain under review, and a vote is expected this December.

However, for Latvian Tesla owners with compatible vehicles and software, the imminent rollout expands access to the supervised system while underscoring that attentive human oversight remains essential.

Continue Reading