Connect with us

News

Tesla Cybercab specs revealed: range, curb weight, range ratings, and more

Published

on

(Credit: Teslarati)

Tesla’s Cybercab has taken a significant step toward production with new technical details emerging from 2026 EPA certification documents.

The filings, which include a Certificate of Conformity issued in late May, provide the most comprehensive public look yet at the purpose-built autonomous vehicle designed for high-volume, low-cost ride-hailing operations.

At its core, the Cybercab is a front-wheel-drive electric vehicle powered by a single 163 kW (219 horsepower) AC permanent magnet motor. Despite its modest output, prioritizing efficiency and cost over neck-snapping acceleration, the vehicle boasts a strong power-to-weight ratio thanks to its lightweight curb weight of 3,113 pounds and a GVWR of 3,730 pounds.

It operates on a 326-volt electrical architecture with a compact ~48 kWh lithium-ion battery pack. The standout revelation is the vehicle’s exceptional efficiency, which Tesla has routinely flexed in the past.

EPA lab tests list an equivalent all-electric range of 418 miles combined and 375 miles on the highway. Tesla has previously targeted around 300 miles of real-world range, and analysts expect the final EPA-rated figure to land near 280-300 miles after adjustment factors.

Advertisement

At a certified 165 Wh/mi in earlier testing, the Cybercab is reportedly the most efficient EV ever produced, significantly outperforming vehicles like the Lucid Air Pure.

Advertisement

This efficiency stems from deliberate design choices tailored for robotaxi duty. The two-seater features a highly aerodynamic shape, minimal weight, which is aided by structural battery integration of what are likely 4680 cells, and no steering wheel or pedals in its fully autonomous configuration.

For ride-hailing fleets, where average trips are short, and can be just five or ten miles, the smaller battery enables faster charging cycles, lower material costs, and reduced vehicle price, a key to Tesla’s goal of a ~$30,000 production cost.

Implications for Autonomous Mobility

These specs underscore Tesla’s strategy: maximize utilization and minimize operating expenses. A ~48 kWh pack could support dozens of short rides per charge, with energy costs potentially dropping below 20 cents per mile at scale. Front-wheel drive simplifies manufacturing and maintenance compared to dual-motor AWD setups in passenger Teslas.

The 219 hp motor provides ample performance for urban and highway speeds without excess, addressing questions about why such power is needed in a “slow” autonomous vehicle. Quick merges and hill climbing still matter for safety and passenger comfort.

Production has already begun at Giga Texas, with EPA certification clearing the path for U.S. deployment. While unsupervised Full Self-Driving remains the critical hurdle, these details paint a compelling picture of a vehicle engineered from the ground up for the robotaxi future: affordable to build, cheap to run, and capable of delivering strong range on a fraction of the battery capacity found in today’s EVs.

Advertisement

As Tesla ramps toward volume output, the Cybercab could reshape urban transportation economics.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla to open source Model S and Model X designs and software

Published

on

Credit: Tesla

In a move echoing its earlier commitment to open innovation, Tesla CEO Elon Musk announced recently that the company plans to make the design and software of its Model S and Model X fully open source.

This follows the same approach Tesla took with its original Roadster, releasing all available design, engineering, and diagnostic materials in November 2023 so that “whatever we have, you now have.”

The Model S, introduced in 2012, was Tesla’s first mass-produced vehicle and a groundbreaking luxury electric sedan. It offered impressive range, rapid acceleration, and over-the-air software updates that redefined expectations for electric cars.

Advertisement

The Model X, launched in 2015, built on that foundation as a high-performance electric SUV notable for its distinctive falcon-wing doors, spacious interior, and advanced safety features. Both models served as flagships that helped establish Tesla as a leader in the EV industry and popularized long-range battery-electric vehicles.

Production of the Model S and Model X was wound down earlier in 2026, with manufacturing ending in the second quarter. Tesla redirected the Fremont factory space previously used for these vehicles toward higher-priority projects, including Optimus humanoid robots and the Cybercab autonomous vehicle.

By the time of Musk’s open-source announcement, custom orders had closed and only remaining inventory was available.

Open-sourcing the designs and software offers several clear advantages. Owners of these aging but still capable vehicles gain better access to technical documentation, diagnostic tools, and software resources, making independent repairs and modifications easier and more affordable.

Independent repair shops and third-party specialists can support the large existing fleet without relying solely on Tesla’s service network. Enthusiasts and engineers can study real-world implementations of Tesla’s battery, powertrain, and software systems, potentially accelerating broader industry progress in electric mobility.

Advertisement

The step aligns with Tesla’s 2014 patent pledge and its overall mission to advance sustainable transport by sharing hard-won knowledge rather than locking it behind proprietary walls.

By releasing these materials now that the models have left production, Tesla ensures continued support for its early adopters while freeing internal resources for future technologies. The open-source release of the original Roadster already enabled simulations, community projects, and deeper technical understanding.

Extending that practice to the Model S and Model X should deliver similar benefits on a larger scale, helping keep these influential vehicles relevant and repairable for years to come

Continue Reading

News

Tesla flexes incredible Robotaxi metric that skeptics will hate

Published

on

Credit: Tesla

Tesla flexed one incredible Robotaxi metric during the Q2 Earnings Call that skeptics have to hate to hear. The company’s platform has already driven more than 380,000 miles of unsupervised ride-hailing across several states with no notable incidents.

During the company’s Q2 Earnings Call on Wednesday, Vice President of AI, Ashok Elluswamy, said:

“First of all, I’d like to state that the Robotaxi program has been operating extremely well. Especially in terms of safety, the program has had an impeccable safety record. We have driven more than 380,000 miles of unsupervised Robotaxi, now across six cities in two different states. We have had zero notable incidents. Any reports have been of other actors impacting us when we were stationary. I like to emphasize how safe the operation has been so far. Zero notable incidents over 380,000 miles.”

Elluswamy’s claim over Robotaxi miles is a significant milestone for Tesla in the grand scheme, especially considering this is a sizeable number of miles without any incident.

Tesla’s self-driving approach is much different than that of other companies. Tesla has maintained that vision is the only thing needed to have a solid and effective self-driving suite. Many self-driving companies utilize things like LiDAR, sensors, and other elements to improve performance, but Elluswamy sent a jab at those who believe it’s needed.

“Historically, the so-called experts have always claimed that you need LiDARs, radars, HD maps, and the entire kitchen sink to drive safely. Here we show that such is not true. You can have safe, comfortable, and affordable autonomy with just cameras. This record should be a huge validation of Tesla’s entire AI approach.”

The feat of accumulating this many miles without any driver behind the wheel is impressive. The thing is, Tesla is also doing this across several different locations, with varying traffic rules, pedestrian levels, weather patterns, and other important factors.

While Tesla is not ready to roll out an unsupervised platform completely, it is a slow but steady indication that the company is well on its way to figuring things out.

Advertisement

The company’s attitude toward expansion is slow, safe, and controlled, and despite this huge milestone, it will still be some time until we see Tesla truly unleash unsupervised rides more aggressively.

Continue Reading

Elon Musk

SpaceX Starship just nailed something it’s never done before

SpaceX’s Starship flew successfully Friday, landing both stages and deploying its first Starlink V3 satellites.

Published

on

By

Starship’s thirteenth test flight delivered exactly what SpaceX needed with a clean liftoff, two successful stage recoveries, and the first real payload the vehicle has ever carried to space. Booster 20 and Ship 40 lifted off at 5:51 p.m. CT from Starbase, and by the time the mission wrapped roughly an hour later, both halves of the rocket had done exactly what they were supposed to do.

Booster 20 separated from Ship 40 a few minutes into the flight and stuck a controlled splashdown in the Gulf of Mexico about six minutes after liftoff. That is a meaningful turnaround from Flight 12 in May, when the booster lost several engines during its boostback burn before a hard water landing attempt.


Starship 40’s performance was arguably the bigger win. The vehicle deployed the first 20 operational Starlink V3 satellites Starship has ever carried, then flew a suborbital arc to a landing in the Indian Ocean that SpaceX commentator Dan Huot called the company’s softest splashdown yet. “This is a dream scenario for this team that’s trying to get this heat shield data,” Huot said on the live broadcast, according to Space.com’s live coverage. “I’m a little over the moon right now. Wow. Lucky number 13.”

Unlike the mass simulators SpaceX flew on Flight 12, these were production Starlink V3 satellites, meant to extend solar arrays and antennas and attempt to link with the broader constellation before reentering minutes later. Getting real hardware through a full deploy sequence on only the second flight of the V3 generation keeps Starship on schedule for the payload work NASA is counting on for future Artemis lunar landings.

Advertisement

— TESLARATI (@Teslarati) July 25, 2026

The flight also arrives at a moment when SpaceX needed a win. SPCX has traded below its $135 IPO price since mid-July, as Teslarati reported when the mission slipped to Friday, and short interest has climbed to roughly a third of the tradable float. A clean flight will not fix a balance sheet, but it does answer the one question SpaceX absolutely needed answered this week: whether the fixes made after the July 16 abort would hold up under real flight conditions. They did, on both stages, on the first try after the redesign.

SpaceX has not set a target date for Flight 14, though the company has said it wants to push toward an orbital attempt on the next mission. After Friday, that goal looks a lot more within reach.

Advertisement
Continue Reading