Connect with us
tesla tesla

News

Tesla driver behind tragic Model S crash in CA gets probation

Published

on

A Tesla driver who was involved in a tragic crash in California back in 2019 has been sentenced to two years of probation after pleading no contest to two counts of vehicular manslaughter. The case is significant as it is believed to be the first felony prosecution in the United States involving a driver who was using a driver-assist system like Autopilot. 

Kevin George Aziz Riad was driving a Tesla Model S in 2019 when it ran a red light, resulting in a fatal collision with another car in Gardena. Prosecutors revealed during a preliminary hearing in March 2022 that Riad’s Tesla ran a red light at Vermont Avenue and collided with a Honda Civic while traveling at a speed of 74 mph. Riad was believed to be operating the Tesla on Autopilot when the crash occurred.

The crash resulted in the deaths of Gilberto Alcazar Lopez, 40, and Maria Guadalupe Nieves-Lopez, 39. Relatives of the victims mentioned that the couple was on their first date at the time of the crash. Riad and his girlfriend, who was a passenger in the ill-fated Tesla, suffered minor injuries and were hospitalized.

As noted in a report from the Daily Breeze, Riad entered a no contest plea on June 22, and he immediately received his sentence. His sentence included probation, 31 days of work for Caltrans or another approved group, 100 hours of community service, 90 days of house arrest, and participation in a hospital and morgue program.

Tatevik Tigranyan, a spokesperson for the Los Angeles County District Attorney’s Office, stated that if Riad violates his probation, he could face a four-year prison sentence. 

Advertisement

During the legal proceedings, the prosecution highlighted that Autosteer and Traffic Aware Cruise Control in the ill-fated Model S were engaged at the time of the collision. A Tesla engineer who testified in the case noted that sensors in the vehicle showed that Riad had his hand on the steering wheel. However, crash data showed that no brakes were applied in the six minutes prior to the accident. Tesla constantly reminds its customers to pay close attention to the road when using features like Autopilot or Full Self-Driving to avoid potential accidents.

Riad’s defense attorney, Arthur Barens, had previously argued for the charges to be reduced to misdemeanors, asserting that any negligence by Riad would have resulted in a citation had the fatal crash not occurred. However, the judge disagreed with the defense attorney’s argument. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Robotaxi just got a big benefit from the U.S. government

The NHTSA is looking to help streamline the application process for companies developing driverless vehicles.

Published

on

Credit: Tesla

Tesla Robotaxi just got a big benefit from the U.S. Government, as the National Highway Traffic Safety Administration (NHTSA) is looking to ease some rules and streamline the application process that could hinder the development and licensing of autonomous vehicles.

Tesla is set to launch its Robotaxi platform in the coming days or weeks, but regulation on autonomous vehicles is incredibly slim, so automakers are left in a strange limbo as permissions to operate are usually up to local jurisdictions.

The NHTSA still has the ultimate say, but it is now adopting a new strategy that will see companies gain an exemption from federal safety standards and streamline the entire application process.

The agency is authorized to grant exemptions to permit manufacturers to produce vehicles over a two or three-year period that might not comply with certain Federal Motor Vehicle Safety Standards (FMVSS). Robotaxi, for example, will eventually not have a steering wheel or pedals, through the Cybercab that Tesla unveiled last October.

The exemption program the NHTSA announced today would be possible through Part 555 of the National Traffic and Motor Vehicle Safety Act:

“NHTSA may grant a Part 555 exemption if at least one of four bases listed in the statute is met and NHTSA determines that the exemption is consistent with the public interest and the Safety Act. The statute also authorizes NHTSA to subject an exemption to terms the agency deems appropriate and requires that NHTSA publish notice of the application and provide an opportunity to comment.”

The rapid and non-stop innovation that is being performed is tough to keep up with from a legal standpoint. The NHTSA recognizes this and says current legislation is appropriate for traditional vehicles, but not for the self-driving cars companies are producing now:

“The current Part 555 process was designed for traditional vehicles. As currently applied, this process is not well suited for processing exemptions involving ADS-equipped vehicles in a timely manner or overseeing the unique complexities involving their operations. This has resulted in long processing times for applications for ADS-equipped vehicles. NHTSA must improve its Part 555 processing times substantially to keep pace with the rapid innovation of the ADS industry and to ensure that exemptions remain effective tools for nurturing groundbreaking safety technologies.”

Now, the NHTSA will be “enhancing application instructions” to help manufacturers understand the requirements involved in the application process. This will streamline the entire process by “reducing the need for NHTSA to request additional information from the manufacturer,” the agency says.

First Tesla driverless robotaxi spotted in the wild in Austin, TX

Next, the NHTSA is going to have a more flexible approach to evaluating exemptions for ADS-equipped vehicles:

“To build flexibility into the Part 555 process while also accounting for the unique aspects of those exemptions, NHTSA intends to develop terms that could be included in Part 555 exemption grants, when appropriate, to condition operations of exempted ADS-equipped vehicles on enhanced and continuing oversight from NHTSA. NHTSA would expect to administer this enhanced oversight through letters, which could be updated over time, mirroring real-world ADS development. This will enable NHTSA to focus its initial review during the application stage and align the Part 555 oversight approach more closely to exemptions administered under NHTSA’s Automated Vehicle Exemption Program (AVEP), which have proven effective for ADS.”

This will benefit any company making autonomous vehicles, but it will especially benefit Tesla in the short-term as it is readying for the launch of Robotaxi.

Tesla is trading up 1.89 percent at the time of publication.

Part 555 Letter June 2025 by Joey Klender on Scribd

Continue Reading

News

SpaceX produces its 10 millionth Starlink kit

The first 5 million Starlink kits took nearly four years to build.

Published

on

Credit: Starlink/X

SpaceX has achieved a major milestone, producing its 10 millionth Starlink kit. The accomplishment was celebrated across the company’s Hawthorne, California, and Bastrop, Texas, facilities. 

The milestone was shared in social media by Sujay Soman, Senior Facilities Engineer, in a LinkedIn post, which has since been deleted. 

Starlink Production Ramp

Soman noted in his LinkedIn post that the first 5 million Starlink kits took nearly four years to build, but the next 5 million kits were completed in just 11 months. This underscores SpaceX’s intense efforts to ramp up the satellite internet system’s production, and it reflects the private space company’s manufacturing prowess.

The SpaceX Senior Facilities Engineer shared a couple of photos of the Machine Maintenance and Facilities team in Bastrop to commemorate the event.

“Today, Starlink Product teams across our Hawthorne and Bastrop sites produced the 10th Million Starlink Kit! It took almost 4 years to build our first 5 million kits, and we doubled that in about 11 months. Monumental accomplishment!” Soman wrote in his post.

Advertisement
Credit: Sujay Soman/LinkedIn

World-Changing Technology 

The Starlink kits, featuring dish hardware and supporting equipment, enable users to connect to the company’s growing constellation of low Earth orbit satellites. With over 6,000 satellites launched to date, Starlink now provides fast and reliable internet connectivity to over 6 million customers worldwide. This was a significant increase from the 5 million customers that the company reported in February 2025.

SpaceX has not detailed its next production targets, but the production of Starlink’s 10 millionth kit milestone signals the company’s readiness to scale further. Being an Elon Musk-led company, SpaceX is arguably the best in the business when it comes to efficient and cost-effective manufacturing. It would then be unsurprising if SpaceX announces another Starlink production milestone soon.

Continue Reading

News

Tesla retires yoke steering wheel in base Model S and X

Tesla’s controversial steering yoke is now exclusive to the Model S and Model X Plaid.

Published

on

tesla-model-s-plaid-yoke
Credit: @dkrasniy/X

Tesla has closed a chapter in the saga of the Model S and Model X’s controversial steering yoke. Following the announcement of the new iterations of the flagship vehicles, Tesla promptly removed the steering option for the vehicles’ base variants.

This means that if drivers wish to experience the Model S or Model X with a yoke, they would have to go Plaid.

The new Model S and Model X

The refresh of the Model S and Model X were quite minor, with the two vehicles featuring a new front camera, a new color, and a handful of other small changes like new exterior styling for the Model S Plaid. Tesla also noted on its website that the two vehicles now have a much smoother and quieter ride.

The changes were quite polarizing, with some appreciating the subtle improvements made to the two flagship cars and others arguing that Tesla should have done more. Others, however, noted that the level of improvements implemented on the Model S and Model X would already be considered major refresh for a tech company like Apple.

No More Yoke Unless Plaid

When Tesla refreshed the Model S and Model X in 2021, the vehicles were released with a steering yoke as standard. The yoke was controversial, with critics stating that it was unsafe and fans stating that it made driving the Model S and Model X fun. Tesla later introduced a round steering wheel option for the Model S and Model X, which later became standard on the two flagship vehicles.

Advertisement

This remains true today, with the most recent versions of the Model S and Model X still being released with a round steering wheel as standard. Those who wish to experience the Model S and Model X Plaid as envisioned by the company and its CEO, Elon Musk, however, might find it a good idea to spend the extra $1,000 for the vehicles’ yoke steering wheel.

Continue Reading

Trending