News
Tesla’s Elon Musk shares ambitious FSD safety target, highlights Dojo’s potential
Tesla CEO Elon Musk recently shared an ambitious safety target for the company’s Dojo supercomputer and its contributions to Autopilot and FSD. Musk’s comments were posted on Twitter after Tesla shared a white paper on the upcoming supercomputer, which would be used to optimize the training and development of Autopilot and Full Self-Driving.
Tesla’s Dojo white paper is incredibly technical, though it appears to suggest that the company has created a new way of representing numbers in computer programs that would then be useful for various scenarios, and is several times faster. As the Tesla online community discussed the white paper, Musk noted that the document is “more important than it may seem at first.”
This is more important than it may seem at first
— Elon Musk (@elonmusk) October 26, 2021
Considering that Dojo would be used to expedite the training and development of the company’s Autopilot and Full Self-Driving systems, the supercomputer could serve a crucial role in raising the safety of Tesla’s vehicles. Electric vehicle advocate Pranay Pathole, in response to Musk’s initial comment, noted that Dojo would likely gain the capability to predict what good human drivers would do given a set of conditions on the road.
This meant that once Dojo becomes more self-supervised, accidents on the road that are caused by human error would likely see a notable drop. Elon Musk seemed to agree with this sentiment, responding that a 90% reduction in traffic fatalities seems likely with Dojo’s full rollout. Speculating further, Musk noted that there’s even a chance that the innovations with the Dojo supercomputer would be able to reduce accidents on the road by over 99%.
Reducing traffic fatalities by 90% seems likely, perhaps ultimately by over 99%
— Elon Musk (@elonmusk) October 26, 2021
Musk’s predictions about Dojo’s potential may sound incredibly optimistic, but the CEO has a point. Tesla’s Autopilot and FSD programs are designed to be safety systems, even if they tend to make driving tasks incredibly convenient. Bolstered by Dojo’s capabilities, Tesla’s advanced driver-assist solutions might very well reach their full potential. Elon Musk, after all, has noted in the past that his goal would be to make Teslas so safe, the company’s vehicles would avoid even accidents that might be intentional.
“Worldwide, there’s about a million people a year dying in car accidents. That’s a hell of a lot, and there’s like 10 million people that get seriously injured. So it’s like, you know, we got to hustle on this,” Musk said during a one-on-one interview with automotive teardown expert Sandy Munro.
Read Tesla’s Dojo supercomputer white paper below.
Tesla Dojo Technology by Simon Alvarez
Don’t hesitate to contact us with news tips. Just send a message to tips@teslarati.com to give us a heads up.
Energy
Tesla launches Cybertruck vehicle-to-grid program in Texas
The initiative was announced by the official Tesla Energy account on social media platform X.
Tesla has launched a vehicle-to-grid (V2G) program in Texas, allowing eligible Cybertruck owners to send energy back to the grid during high-demand events and receive compensation on their utility bills.
The initiative, dubbed Powershare Grid Support, was announced by the official Tesla Energy account on social media platform X.
Texas’ Cybertruck V2G program
In its post on X, Tesla Energy confirmed that vehicle-to-grid functionality is “coming soon,” starting with select Texas markets. Under the new Powershare Grid Support program, owners of the Cybertruck equipped with Powershare home backup hardware can opt in through the Tesla app and participate in short-notice grid stress events.
During these events, the Cybertruck automatically discharges excess energy back to the grid, supporting local utilities such as CenterPoint Energy and Oncor. In return, participants receive compensation in the form of bill credits. Tesla noted that the program is currently invitation-only as part of an early adopter rollout.
The launch builds on the Cybertruck’s existing Powershare capability, which allows the vehicle to provide up to 11.5 kW of power for home backup. Tesla added that the program is expected to expand to California next, with eligibility tied to utilities such as PG&E, SCE, and SDG&E.
Powershare Grid Support
To participate in Texas, Cybertruck owners must live in areas served by CenterPoint Energy or Oncor, have Powershare equipment installed, enroll in the Tesla Electric Drive plan, and opt in through the Tesla app. Once enrolled, vehicles would be able to contribute power during high-demand events, helping stabilize the grid.
Tesla noted that events may occur with little notice, so participants are encouraged to keep their Cybertrucks plugged in when at home and to manage their discharge limits based on personal needs. Compensation varies depending on the electricity plan, similar to how Powerwall owners in some regions have earned substantial credits by participating in Virtual Power Plant (VPP) programs.
News
Samsung nears Tesla AI chip ramp with early approval at TX factory
This marks a key step towards the tech giant’s production of Tesla’s next-generation AI5 chips in the United States.
Samsung has received temporary approval to begin limited operations at its semiconductor plant in Taylor, Texas.
This marks a key step towards the tech giant’s production of Tesla’s next-generation AI5 chips in the United States.
Samsung clears early operations hurdle
As noted in a report from Korea JoongAng Daily, Samsung Electronics has secured temporary certificates of occupancy (TCOs) for a portion of its semiconductor facility in Taylor. This should allow the facility to start operations ahead of full completion later this year.
City officials confirmed that approximately 88,000 square feet of Samsung’s Fab 1 building has received temporary approval, with additional areas expected to follow. The overall timeline for permitting the remaining sections has not yet been finalized.
Samsung’s Taylor facility is expected to manufacture Tesla’s AI5 chips once mass production begins in the second half of the year. The facility is also expected to produce Tesla’s upcoming AI6 chips.
Tesla CEO Elon Musk recently stated that the design for AI5 is nearly complete, and the development of AI6 is already underway. Musk has previously outlined an aggressive roadmap targeting nine-month design cycles for successive generations of its AI chips.
Samsung’s U.S. expansion
Construction at the Taylor site remains on schedule. Reports indicate Samsung plans to begin testing extreme ultraviolet (EUV) lithography equipment next month, a critical step for producing advanced 2-nanometer semiconductors.
Samsung is expected to complete 6 million square feet of floor space at the site by the end of this year, with an additional 1 million square feet planned by 2028. The full campus spans more than 1,200 acres.
Beyond Tesla, Samsung Foundry is also pursuing additional U.S. customers as demand for AI and high-performance computing chips accelerates. Company executives have stated that Samsung is looking to achieve more than 130% growth in 2-nanometer chip orders this year.
One of Samsung’s biggest rivals, TSMC, is also looking to expand its footprint in the United States, with reports suggesting that the company is considering expanding its Arizona facility to as many as 11 total plants. TSMC is also expected to produce Tesla’s AI5 chips.
News
Anti-Tesla union leader ditches X, urges use of Threads instead
Tesla Sweden and IF Metall have been engaged in a bitter dispute for over two years now.
Marie Nilsson, chair of Sweden’s IF Metall union and a prominent critic of Tesla, has left X and is urging audiences to follow the union on Meta’s Threads instead.
Tesla Sweden and IF Metall have been engaged in a bitter dispute for over two years now.
Anti-Tesla union leader exits X
In a comment to Dagens Arbete (DA), Nilsson noted that her exit from X is not formally tied to IF Metall’s long-running labor dispute with Tesla Sweden. Still, she stated that her departure is affected by changes to the platform under Elon Musk’s leadership.
“We have stayed because many journalists pick up news there. But as more and more people have left X, we have felt that the standard has now been reached on that platform,” she said.
Jesper Pettersson, press officer at IF Metall, highlighted that the union’s departure from X is only indirectly linked to Tesla Sweden and Elon Musk. “Indirectly it does, since there is a lot of evidence that his ownership has caused the change in the platform to be so significant.
“We have nevertheless assessed that the platform had value for reaching journalists, politicians and other opinion leaders. But it is a microscopic proportion of the public and our members who are there, and now that value has decreased,” Petterson added.
IF Metall sees Threads as an X alternative
After leaving X, IF Metall has begun using Threads, Meta’s alternative to the social media platform. The union described the move as experimental, noting that it is still evaluating how effective the platform will be for outreach and visibility.
Pettersson acknowledged that Meta also does not operate under Sweden’s collective bargaining model, but said the union sees little alternative if it wants to remain visible online.
“In a perfect world, all large international companies would be supporters of the Swedish model when they come here. But unfortunately, the reality is not like that. If we are to be visible at all in this social media world, we have to play by the rules of the game. The alternative would be to become completely invisible, and that would not benefit our members,” he said.