Cybertruck
Tesla launches Cybertruck orders in a new market with a catch
Tesla is launching Cybertruck orders in a new market, but there’s a bit of a catch.
The Cybertruck was launched in the Middle East earlier this year, as Tesla launched the ability to place a reservation for the all-electric pickup in the United Arab Emirates. It would be the first market outside of North America that would have the ability to place an order for the Cybertruck.
Tesla confirms Cybertruck will make its way out of North America this year
Other markets where the vehicle has been widely requested, like Europe and Asia, have still not approved the vehicle to be sold to the public, mostly because of size and design restrictions.
However, in the UAE, Tesla is opening up the ability for those who placed reservations for the vehicle to finally put in their order. The Order Configurator is only available to those who have already placed a reservation; it is not yet available to the public.
Tesla said it would open up the public online configurator across the Middle East in the coming weeks:
If you’re in the UAE and you have a Cybertruck reservation, you can now order your new truck
The public will get access in the coming weeks. https://t.co/KJaP7NEfiT
— TESLARATI (@Teslarati) September 16, 2025
The UAE is not the only country that will have access to the Cybertruck, as fans in other Middle Eastern countries will also be able to place orders soon. Tesla announced back in April that Saudi Arabia and Qatar would also have Cybertruck deliveries.
These vehicles will be built at Tesla’s Gigafactory Texas plant just outside of Austin, as Gigafactory Berlin and Gigafactory Shanghai, two factories located in the same hemisphere as the Middle East, do not have established lines for Cybertruck production.
As for the other markets, Tesla CEO Elon Musk has hinted that the company could develop a smaller Cybertruck for those markets, as he admitted that in the long term, it likely made sense to build a more compact version for regions where roads are traditionally tighter.
Elon Musk hints at smaller Tesla Cybertruck version down the road
There has been no evidence of Tesla developing this more compact version, but it could eventually happen.
Cybertruck
Tesla Cybertruck production snaps back after ugly supplier fight
Cybertrucks are piling up again at Giga Texas after Tesla’s court win against a parts supplier.
Cybertruck production at Giga Texas is showing its first visible recovery since Tesla sued a supplier last month over withheld manufacturing tooling.
Aerial observer Joe Tegtmeyer flew over the Austin factory Wednesday morning and counted roughly 100 or more Cybertrucks filling the outbound lot, a sharp jump from the thin numbers seen in recent weeks. The flyover came a day after a judge granted Tesla a temporary restraining order against Angstrom Automotive Group, the parts supplier at the center of the dispute.
Tesla filed an emergency lawsuit in late July after Angstrom told the automaker it planned to close the Troy, Texas facility where Tesla’s die-cast tools, trim dies and other Cybertruck stamping equipment were housed. According to Tesla’s complaint, a shipment of 700 finished parts never left the building, and when Tesla sent representatives to retrieve its equipment, accompanied by law enforcement, they were turned away. Angstrom allegedly then asked for an extra $250,000 a week to keep operating, which Tesla’s filing described as holding its own property for ransom.
TESLA: U.S. District Judge Christopher R. Wolfe of the U.S. District Court for the Western District of Texas, Waco Division granted Tesla a Temporary Restraining Order and Writ of Replevin in its dispute with Angstrom Automotive (Case No. 6:26-cv-00477).
The order authorizes… https://t.co/E1DKcQSxMn pic.twitter.com/LR8aAiV2Og
— S.E. Robinson, Jr. (@SERobinsonJr) August 5, 2026
The restraining order gives Tesla immediate right of entry to Angstrom’s facility to recover the tooling. It is temporary, with a fuller hearing still to come, but the speed of Wednesday’s rebound suggests the Angstrom shortage was indeed the main bottleneck limiting Cybertruck output. Outbound lot counts are an imperfect measure of actual production, since finished trucks can sit for days before shipping, but a lot that full after a lean stretch is a meaningful signal.
Cybertruck output at Giga Texas has fluctuated all year as Tesla worked through supply issues and introduced new trims, including a cheaper Dual Motor AWD version that drew strong early demand.
Tesla has continued to flex the strength, rigidity, and robustness of its all-electric pickup, the Cybertruck. In fact, since 2019, Cybertruck’s ability to avoid dents, dings, and even gunfire has been one of the main selling points Tesla has used to attract buyers who are looking for a vehicle that can handle the most intense challenges.
But that does not mean Tesla is not still actively trying to make it even better.
In a new hardware update, Tesla has decided to change the material of the Cybertruck’s underbody panels from aluminum to carbon fiber, a move that aims to not only increase pricing efficiency but also improve strength.
RELATED:
Cybertruck Lead Engineer Wes Morrill confirmed the change was made to the Cybertruck recently after it was spotted by Coleton Guerin of Out of Spec. This particular trim level was a Cyberbeast, but it is being applied to all trims to keep supply chain efficiency high and have less variance across trim levels.
Morrill said that Tesla tested different materials for the underbody panel protection, and carbon fiber performed better than aluminum, which is what the company was using since its first deliveries in 2023.
Additionally, there are some efficiency improvements because Tesla can better form the areas around the bolts to keep underbody airflow cleaner than previously.
good eye – it’s a new material. Testing showed it to be more durable than the aluminum while being lower weight and cost. Also slight efficiency improvement since we can better form the areas around the bolts to keep the underbody airflow cleaner than what stamped aluminum allows
— Wes (@wmorrill3) July 30, 2026
Carbon fiber is traditionally lighter and more durable than aluminum, which is why it is such a popular material among luxury automakers, and EV makers will utilize some of the materials around battery packs to save weight.
This is the first instance of Tesla utilizing carbon fiber on the Cybertruck’s exterior to help with overall performance and strength. As previously mentioned, Tesla used aluminum to protect the underside of the body, but it is pretty typical for the company to continue making engineering changes that will improve the car in the future.
TESLARATI Premium Membership
$19.99 USDCybertruck
Tesla claims supplier is holding Cybertruck production hostage
Tesla has sued a supplier over Cybertruck tooling it now says is held for ransom.
Tesla is asking a federal court to force a Cybertruck parts supplier to hand back manufacturing equipment the automaker says it owns, warning that production of the pickup could stop within days without it.
The company filed an emergency lawsuit in the U.S. District Court for the Western District of Texas, asking for a hearing on short notice to recover tooling used to stamp Cybertruck components at Giga Texas. According to the complaint, first reported by Bloomberg, the equipment sits inside a Troy, Texas plant run by Angstrom Automotive Group, which bought the facility from Anderton Casting last year and kept it on as a Tesla supplier. Case 6:26-cv-0477 is one of the more urgent supplier disputes Tesla has brought to court.
The dispute traces back to July 13, when Angstrom told Tesla it planned to close the Troy facility. The two sides then failed to agree on a plan to retrieve the die-cast tools, trim dies, fixtures, cutting tools, gauges and X-ray equipment that belong to Tesla. A shipment of 700 finished parts due out on July 17 never left the building, according to the filing. When Tesla sent representatives to the plant on July 21, accompanied by law enforcement, they were turned away.
Tesla’s complaint alleges Angstrom then asked for an extra $250,000 a week to keep the facility running, a demand the automaker calls an attempt to exert commercial pressure by holding its own property “for ransom.” Angstrom has not issued a public response.
The lawsuit states thousands of Cybertrucks already assigned to customers are tied to the parts in question, and that supply will run out “in mere days” without court intervention. Tesla says it is not asking the judge to resolve the underlying contract dispute or award damages, only to get physical access to equipment it already owns.
Tesla has also turned to the courts before to protect its supply chain, including its ongoing trade secret fight with former battery equipment supplier Matthews International, where a judge issued a permanent injunction against the company earlier this year.
A ruling on Tesla’s request for emergency relief is expected within days.
SpaceX and a new Trump order that could rewrite the next decade of launches
Tesla will resolve massive China recall with stickers and a software update
