Connect with us

News

Tesla Model X Plaid makes an appearance at Model S Plaid delivery event

(Credit: @klwtts/Twitter)

Published

on

The Tesla Model X Plaid made an appearance at the Model S Plaid’s delivery event. And based on images and videos of the newly redesigned flagship SUV, the new Model X would be just as jaw-dropping as its sedan sibling, especially when it comes to its raw power and bleeding-edge tech. 

Images of a white Model X Plaid with a six-seat configuration and 22″ Turbine Wheels made the rounds online as attendees of the Model S Plaid delivery event enjoyed the occasion’s after-party. Tesla allowed guests to sit inside the vehicle, which opened the doors for some of the attendees to check out the vehicle’s features like its rear display, which could stream media content, play games, and adjust climate control. 

The standout feature of the Model X Plaid, of course, is its raw performance. Just like its sibling, the vehicle, which is yet to start its deliveries, certainly does not disappoint. As per Tesla’s website, the Model X Plaid is capable of sprinting from zero to 60 mph in 2.5 seconds, allowing it to hit a top speed of 163 mph. And considering what CEO Elon Musk mentioned in the Model S Plaid’s presentation, the three-motor, 1,020 horsepower SUV would likely keep pulling hard even after crossing the 100 mph barrier. 

But behind all this performance lies one thing that truly makes the Model X Plaid special: its interior, which feels even more cavernous than before. The Model X is known as a vehicle with a surprisingly large cabin that is enough to seat seven people comfortably, and with the new yoke steering system and infotainment system, the flagship SUV seems to feel even more spacious. It will not be surprising if the Model X Plaid proves popular among families, particularly those that love to travel a lot. 

Advertisement
-

Interestingly enough, Tesla currently lists the Model X Plaid with a starting price of $119,990 before options. This is $10,000 less than the Model S Plaid, which started deliveries today. Granted, this may simply be due to Tesla not yet updating its official website. But even if the Model X Plaid gets a price increase, there is no doubt that the vehicle would still be a bang-for-the-buck EV. It may be priced at a premium, after all, but for the performance and tech it offers, even a price that matches or exceeds the Model S Plaid is still quite reasonable. 

Do you have anything to share with the Teslarati Team? We’d love to hear from you, email us at tips@teslarati.com.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Robotaxi takes over for Uber credits and loaners at Service locations

Published

on

Tesla is now utilizing its in-house Robotaxi platform to give those waiting for their vehicles during Service visits rides instead of offering Uber credits or Loaner vehicles.

Tesla owners in Austin who bring vehicles in for service are receiving in-app prompts to use the company’s Robotaxi network while their cars are being worked on.

One recent notification, sent during a frunk repair, carried the heading “Try Robotaxi During Your Service Visit” and stated that while the vehicle is being serviced, the customer can take an autonomous Robotaxi ride to the next destination in Austin and download the Robotaxi app to get started.

The suggestion arrives as Tesla has long relied on two main ways to keep customers mobile during longer service visits. Service centers have typically offered loaner vehicles drawn from a limited fleet; when those vehicles were unavailable, centers have issued Uber or Lyft credits. Uber credits were widely eliminated years ago, but some locations will still give them out.

Advertisement
-

Both approaches carry costs: loaner cars occupy inventory that could otherwise be sold, and third-party credits generate recurring expense.

Code discovered in Tesla app version 4.60.5 in September 2026 already listed “sv_transport_robotaxi” among the transportation options available for service appointments, alongside paid loaners and other alternatives, indicating the company had been preparing to route customers through its own autonomous fleet.

Your Tesla could be in the Robotaxi fleet next month, Elon Musk claims

Austin provides the clearest early example. The city remains Tesla’s primary Robotaxi market, with unsupervised Model Y and Cybercab vehicles operating across an expanded zone of roughly 400–440 square miles and running 24/7 since November 11. Public driverless service is also live in Dallas, Fort Worth, Houston, San Antonio, Miami, Orlando, and Tampa.

Directing service customers into this network keeps the vehicles utilized and reduces reliance on external rideshare credits, while giving owners practical experience with the Robotaxi app and vehicles during the repair window. Once service is complete, the same network can be used for the return trip without a staffed loaner handoff.

The Austin notification is the first public instance of the capability the September app code previewed. As Robotaxi expands into additional U.S. markets and the fleet grows, service centers in those cities are positioned to follow the same pattern, presenting autonomous rides as a primary transportation option during the service appointment rather than defaulting to loaner vehicles or third-party credits.

Advertisement
-

For customers, the change preserves mobility without the logistics of arranging a temporary car; for Tesla, it links the service operation more tightly to the expanding Robotaxi business.

Continue Reading

Elon Musk

Sean Duffy fires back at Elon Musk over free Starlink

Sean Duffy says the FAA picked a ground network over Starlink, and Musk isn’t impressed.

Published

on

By

Elon Musk and U.S. Transportation Secretary Sean Duffy during Duffy’s visit to Gigafactory Texas in May 2025. (Credit: Elon Musk/X)
Elon Musk and U.S. Transportation Secretary Sean Duffy during Duffy’s visit to Gigafactory Texas in May 2025. (Credit: Elon Musk/X)

Transportation Secretary Sean Duffy has responded to Elon Musk’s claim that the Federal Aviation Administration turned down free Starlink terminals before last week’s nationwide ground stop, saying the department chose a ground-based network after running into problems with an earlier version of the satellite service. Musk’s reply was a single emoji: “🤦‍♂️.”

Speaking at a press conference, Duffy said Starlink had been useful in some parts of the system. “I’ve worked well with Elon, and he, Starlink was a great solution for some of our assets in Alaska, but we sent Starlink, in one of its prior iterations, to our tech lab, and, there was some issues that we had to navigate, and we thought that the best method is to have a network that’s based on the ground,” Duffy said, according to a transcript published by ZeroHedge. “Now, I think what he’s doing with Starlink and the speed is remarkable, but, our airspace is very big. We have assets everywhere. And so, again, we used him for different parts of the airspace.”

Duffy did not dispute that the offer was made. He also did not say what problems the FAA found during testing.

The exchange started Monday, when Musk wrote on X, “Free Starlinks for FAA were offered to Sec Duffy, but he said they were not needed. As it turns out, they were,” as Teslarati reported. That post came three days after the FAA grounded departures nationwide on November 13, when its legacy equipment became unstable as data flooded its telecommunications network at 1,000 connection attempts every four to five seconds. The FAA traced the flood to a radar site in Amarillo, Texas, and a radio site in El Dorado, Arkansas, where L3Harris had been installing a new router. Roughly 12,462 flights were canceled that day.

Duffy has also signaled frustration with L3Harris, which runs the FAA’s current network. “I want to get away from L3Harris and get to a new one, but they own the network,” he said. “I can’t cancel the network that they own.” He has asked Congress for $50 billion to modernize air traffic control, arguing against “a patchwork, a fix to a system that’s critical for every single family.”

The FAA’s position on satellite links predates this week. In a July 2025 letter to lawmakers, FAA Administrator Bryan Bedford said the agency “would not use Starlink (or any satellite service) as the sole communications technology” for safety-critical air traffic services. Reuters reported at the time that the FAA was not considering replacing its L3Harris and Verizon contracts with Starlink. Verizon’s FAA Enterprise Network Services contract, awarded in 2023, is valued at up to $2.4 billion over 15 years.

Musk first pressed the issue in February 2025, while he was leading the Department of Government Efficiency, writing that “the Verizon system is not working and so is putting air travelers at serious risk” before correcting himself days later to blame L3Harris. SpaceX said at the time it was supplying Starlink kits to the FAA at no cost and had no intent to take over any existing contract.

Continue Reading

Elon Musk

Tesla gears up Cybercab with Starlink for public debut, but with notable changes

Published

on

Credit: Joe Tegtmeyer | X

Tesla is gearing up Cybercab, its all-electric and fully autonomous ride-hailing vehicle, for a very public debut as it plans to start customer deliveries in December. However, the units that rolled out of Gigafactory Texas this morning seem to differ from what we have seen previously.

Aerial images captured by drone photographer Joe Tegtmeyer at Giga Texas on November 18 reveal a noticeable update to the appearance of Tesla’s Cybercabs equipped with Starlink. Rows of gold production vehicles sit in the outbound lot, each carrying a flush-mounted Starlink V5 terminal on the rear hatch that looks more refined than the version first shown months earlier.

When Tesla first unveiled the integration in July and displayed a physical example in August, the Starlink hardware appeared as a relatively distinct rectangular panel on the hatch. Later September footage of large numbers of Cybercabs leaving the factory still showed a lighter, more obvious rectangular cover that roughly matched the vehicle’s gold paint:

Images via Joe Tegtmeyer

The newest batch stands out for how cleanly the cover blends into the roof’s character lines. Observers and replies to Tegtmeyer’s post describe the result as tighter and more intentional, sitting flush and following the body contours rather than reading as an added panel.

All of the Cybercabs in the latest images also wear prominent “Cybercab” logos on the doors and rear hatch, confirming these are finished production units rather than early prototypes. They are staged near the factory building, end-of-line areas, and covered transport trailers, with some already lined up for shipment.

The scale and consistency of the installation point to factory tooling rather than retrofit work.

A secondary detail noted in related sightings is a darker tone to the Starlink cover compared with earlier lighter panels. Tegtmeyer himself left open whether the darker finish is deliberate. There are a variety of explanations for it: perhaps for thermal performance, signal characteristics, or simple visual identification—or simply a batch variation still being refined.

Advertisement
-

Either way, the overall effect is a more integrated, production-ready appearance. For a Robotaxi that relies on Starlink for fleet connectivity, passenger services, and backup data links in areas with weak cellular coverage, the cleaner hatch design is more than cosmetic.

It signals that Tesla is polishing the final visual and hardware details as Cybercab volumes continue to climb at Giga Texas ahead of broader Robotaxi deployment. The vehicles now look to be built with Starlink instead of it being added afterward.

Continue Reading