Tesla has been ramping up production of the Cybertruck at its Gigafactory in Austin, Texas, and it will continue to do so throughout this year. In recent footage from the plant, viewers can see over 50 Cybertruck units in a single lot at Giga Texas, seemingly showing that the ramp-up process has been going fairly smoothly.
In a video on YouTube from Brad Sloan over the weekend, you can count over 50 Cybertruck units in just one of the lots at the facility, with an additional 20 to 30 in another area. This is quite a bit more than we’ve witnessed in past drone footage of the factory, indicating Tesla’s continued production ramp-up. Spread across Tesla’s new outbound lot and its testing and calibration area, you can see at least a couple of massive rows of Cybertrucks lined up, along with others being loaded up to be shipped away from the factory.
You can watch the full video from Brad Sloan, taken on Saturday, here, or check out a couple of screenshots from the video below.
Credit: Brad Sloan | YouTube Credit: Brad Sloan | YouTube
It’s tough to say how quickly Tesla is pumping Cybertrucks out at Giga Texas, or how many exactly, since most of these drone videos simply capture the areas over a short period of time in a day. Still, the steady increase of Cybertruck units to now well over 50 suggests that the automaker is inching closer to volume production—though it’s expected to take 12-18 months from when the factory first began producing production units a few months ago.
The video also showed a number of other interesting happenings at the factory, including tons of vehicle castings just outside the plant, continued construction of a 64-stall Supercharger station, and several other ongoing construction projects.
Tesla has been gradually ramping up production of the Cybertruck at Giga Texas since its initial delivery event held in late November, at which the automaker delivered roughly a dozen units. Since then, early Cybertruck deliveries have been trickling out to celebrities and some reservation holders, while the automaker has been touring the unique electric pickup around China and Japan in recent weeks.
Apparent Tesla Cybertruck endurance test setup spotted in Giga Nevada
What are your thoughts? Let me know at zach@teslarati.com, find me on X at @zacharyvisconti, or send us news tips at tips@teslarati.com.
Tesla has introduced an enhanced visualization in its Supercharger navigation system, building directly on the Site Maps feature rolled out a few months ago.
This latest software update adds detailed 3D icons that represent specific vehicle models parked at charging stalls, offering drivers a more precise view of site occupancy and layout.
The Site Maps debuted in Tesla’s 2025 Holiday Update, providing 3D overviews of select Supercharger locations with real-time stall availability.
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
Drivers could see which spots were open, occupied, or out of service when navigating to supported stations.
Now, the system takes this capability further by rendering accurate representations of Tesla vehicles, including distinctions between models such as the Model 3, Model Y, Model S, Model X, and Cybertruck. These icons appear as lifelike 3D renderings, complete with recognizable shapes and proportions that match the actual cars charging at the site:
Supercharger update now shows type of Tesla at charger as well.
Pretty cool. pic.twitter.com/J3NRSIgM0m
— DennisCW | wen my L (@DennisCW_) June 2, 2026
This refinement improves the user experience during road trips and daily charging stops. As drivers approach a Supercharger, the navigation display now shows not just generic occupied markers but identifiable vehicle types plugged into each stall.
Blue indicators highlight active charging sessions, while other visual cues denote availability or maintenance status. The feature integrates seamlessly with the existing map interface, allowing quick assessment of the best available spot based on vehicle size and positioning.
Tesla continues to expand the availability of these detailed Site Maps across its global network. Initially piloted at a limited number of locations, the rollout has progressed steadily, with more stations gaining support in recent software versions.
Owners benefit from better planning, as the system helps identify compatible stalls and reduces uncertainty upon arrival. The update reflects Tesla’s ongoing commitment to refining its navigation and charging ecosystem through iterative software improvements.
In addition to model-specific icons, the enhanced maps maintain all prior functionalities, such as integration with nearby amenities and energy usage predictions. This ensures a comprehensive tool for efficient Supercharging.
As Tesla’s fleet grows and the network scales, such features play a key role in optimizing the overall ownership experience. Future updates may extend similar visualizations to additional sites and incorporate even more data points for drivers.
With this piggyback enhancement, Tesla demonstrates how small but thoughtful additions can elevate an already useful tool, making Supercharger visits smoother and more informed for its customers. The company is expected to broaden the feature’s reach in upcoming releases, further solidifying its leadership in EV charging infrastructure.
Tesla Full Self-Driving v14.3.3 driver monitoring was reportedly scaled back in recent releases, but a new version that was released in the early hours of June 3 aimed to do a better job of keeping those in control of their cars honest, according to release notes.
The release notes for FSD v14.3.3, via Software Version 2026.14.6.7 added:
“Improved driver monitoring system sensitivity with better eye gaze tracking, eye wear handling, and higher accuracy in variable lighting conditions.”
However, Tesla said this was already enabled in the first rollout of FSD v14.3.3 in late May. We tested it anyway, especially as the Standard Speed Profile seemed less-than-worried about what you were doing during operation.
I decided to try out the Hurry and Mad Max Speed Profiles for this test, and it gave me results that I would have expected. Tesla has evidently ramped up driver monitoring based on the Speed Profile you are using to travel.
The more aggressive the Speed Profile, the more on the hook you will be for taking your attention away from the road. Our testing showed that Mad Max was less likely to allow you to do normal things like change music or adjust navigation without getting an on-screen warning or nag from the driver monitoring system.
Hurry Mode Results
On Hurry, the driver monitoring system on FSD v14.3.3, via Software Version 2026.14.6.7, was more restrictive than Standard but less restrictive than Mad Max. I found that I could scroll through music options for a considerable amount of time, more than 30 seconds:
Roughly :31 between first touching the center screen and getting the first nag
— TESLARATI (@Teslarati) June 3, 2026
Standard gave me about 80 seconds of phone scrolling with absolutely no nags or warnings in a previous test. It is worth noting that this was a previous branch of v14.3.3, but Standard is such a goodie-two-shoes on the road that it is my impression it would not change much.
Here’s an 80-second phone nag test on Tesla FSD v14.3.3.
No alerts, no nagging, no annoyance. https://t.co/1dxvTOw5Cn pic.twitter.com/vYViFpjfoK
— TESLARATI (@Teslarati) May 29, 2026
Mad Max Results
I spent the majority of the drive on Mad Max to see how it truly reacted to the driver having their attention elsewhere. While I did do a short phone test, I am aiming to steer away from those and use the center screen. I think it is a valid criticism that the phone test is dangerous and, not to mention, illegal in Pennsylvania. Changing the navigation and music is a more reasonable, more responsible, and safer test.
With Mad Max being the fastest and most aggressive Speed Profile, I anticipated this being the quickest mode to give me an alert that I needed to look at the road. That was the case with music:
🎥 Testing Tesla FSD v14.3.3 (via 2026.14.6.7) nags on Mad Max https://t.co/qZALU2OujY pic.twitter.com/XddOJ0D47x
— TESLARATI (@Teslarati) June 3, 2026
As well as adjusting Navigation, when I received two nags:
🎥 Testing Tesla FSD v14.3.3 (via 2026.14.6.7) nag while adjusting navigation
Two nags here https://t.co/qZALU2OujY pic.twitter.com/xa3dtaDG1L
— TESLARATI (@Teslarati) June 3, 2026
These nags were more than reasonable, and I think it’s probably good that Tesla is ramping up the driver monitoring. I do believe that it should be relatively strict across all of the Speed Profiles, especially with phone use. When using the center screen, the nag intervals should be based on the speed profile you are utilizing at the time.
These driver monitoring adjustments are a great thing to have while FSD is still under its “Supervised” moniker, but I expect Tesla to continue pushing the limits on what it will allow, especially considering CEO Elon Musk has hinted that phone use is capable with the more recent versions.
You can watch the full drive on YouTube below:
Tesla has responded to the skeptics of its Robotaxi program by launching a massive expansion of the unsupervised program in its initial rollout city of Austin.
The company’s geofence, the enabled area of operation for rides, now covers the entire Austin Metropolitan area, an incredible move just days after media headlines attempted to discredit the ride-hailing service.
Those who have access to the Tesla Robotaxi app on their smartphones can now request a ride in any portion of the Austin Metro area. The company confirmed this on the social media platform X:
Unsupervised Robotaxi now in the entire Austin Metro area https://t.co/eXNBdarvVS
— Tesla Robotaxi (@robotaxi) June 3, 2026
This is Tesla’s fifth expansion of the geofence, with the others occurring in July, early August, late August, and late October 2025. It has remained at that size since October 26, but Tesla has now more than doubled that size.
It is now covering the entire area, including suburbs like Pflugerville and Manor, as well as I-35 highways, Gigafactory Texas, and the Austin-Bergstrom Airport.
The move comes just days after various media outlets highlighted the small fleet size of Tesla’s Robotaxi fleet in Austin, something that is a reasonable criticism but an understandable move on the company’s part to prioritize safety.
Tesla has expanded its Robotaxi geofence many times, but its fleet has remained at a relatively conservative size as the company continues to push safety as its most crucial metric.
The latest expansion is a key indicator of Tesla’s comfort level to expand the ride-hailing service. The move shows Tesla is scaling unsupervised autonomy, as it demonstrates that the company’s Full Self-Driving system has reached sufficient reliability for a broader real-world deployment, which is something the company has worked on extensively.
It also shows Tesla is game for a competition with its rivals in the autonomous ride-hailing sector. Tesla has often matched or exceeded competitors like Waymo in coverage area, despite its smaller fleet. This step highlights Tesla’s iterative, data-driven progress toward a high-margin, app-based Robotaxi network.
It’s not the absolute largest area expansion ever, but achieving full unsupervised operations across a major metro is a key moment in the Robotaxi story. It shifts the program from limited pilot/testing toward a more mature commercial service, while gathering the miles needed for faster growth.
Tesla piggybacks recent Supercharger feature with update that takes it further
Tesla Full Self-Driving v14.3.3 driver monitoring: We tested it
