News
Tesla, other EVs required to have ‘traditional engine’ sound to meet new EU rule
Electric vehicles such as Teslas are known for being incredibly quiet. Without an internal combustion engine’s controlled explosions under the hood, electric cars are capable of operating in near-total silence. This, according to a new EU rule, will be changed soon.
A new EU rule coming into force on Monday requires new electric vehicles to be equipped with a pedestrian noisemaker. The new regulations follows concerns that low-emission vehicles such as battery-electric cars are simply too quiet for the road, making them a risk for pedestrians, cyclists, and visually-impaired individuals (among others). According to the new ruling, a car’s Acoustic Vehicle Alert System (AVAS) must be engaged when reversing or traveling below 12 mph (19 km/h).
In its ruling, the EU noted that vehicles usually back up or travel at low speeds in areas that are near people, such as city streets or crosswalks, though the new regulations does allow drivers to deactivate their vehicles’ pedestrian noisemakers as necessary. By 2021, the EU noted that all electric vehicles — not just new models coming to the market — must be equipped with an AVAS.
Quite interestingly, the ruling mentioned that the noise-emitting devices would give EVs a sound that is similar to a “traditional engine,” according to a BBC report. This particular detail is notable, since making electric vehicles sound identical to conventional cars will likely result in some levels of noise pollution, something that EVs completely avoid.
Road noises, after all, are considered the second most harmful environmental stressor in Europe, surpassed only by air pollution. The European Federation for Transport and Environment (also known as Transport and Environment or T&E), for one, notes that vehicle noises are a “major cause, not only of hearing loss, but also of heart disease, learning problems in children and sleep disturbance.”
-->On the flip side, pedestrian noisemakers do make it far easier for the visually impaired to detect where vehicles are on the road. This was highlighted by Guide Dogs for the Blind, a charity that has complained about the absence of sounds from low-emission vehicles. Guide Dogs welcomed the new EU ruling, though the group noted that it would be better if EVs are required to produce sounds at all speeds.
The UK’s Minister of State at the Department for Transport, Michael Ellis, noted in a statement to the publication that the ruling came about as a result of the government wanting the “benefits of green transport to be felt by everyone,” while considering the safety needs of people at the same time. “This new requirement will give pedestrians added confidence when crossing the road,” he said.
While the consideration for the visually-impaired is quite admirable in the new ruling, it is quite interesting to see the EU regulations require electric vehicles to sound like traditional gas cars. EVs, after all, could have their own unique sound, as could be seen in the Jaguar I-PACE, the Audi e-tron, and even the prototype units of the Porsche Taycan. Even Tesla seems to be working on an AVAS, as hinted at by what appears to be a speaker grille on a Model 3’s underbody. Nevertheless, when Tesla rolls out its vehicles’ pedestrian noisemakers, one could be assured that it would be designed to minimize noise pollution, and it would most likely not simulate the sounds of a “traditional” engine.
News
Tesla continues growing its Cybercab production team with new job listings
Both positions are based in Gigafactory Texas, the site of the Cybercab’s initial production.
Tesla continues to build out its workforce for the upcoming Cybercab, with two new job listings for quality inspectors for the autonomous two-seater being listed in the company’s official Careers website.
Both positions are based in Gigafactory Texas, the site of the Cybercab’s initial production.
New Cybercab listings
Tesla recently added openings for “Quality Inspector, Cybercab” and “Quality Inspector, Cybercab – Incoming Quality” on its Careers website. The roles involve detailed inspections of Cybercab components using precision tools such as calipers, micrometers, and gauges, among others. Candidates must also identify non-conformances, document findings in Tesla’s quality management system and collaborate with production teams to resolve issues swiftly.
Overall, these new Cybercab-related roles highlight Tesla’s emphasis on precision for the two-seater’s innovative features, such as its inductive charging setup, which is not available on any Tesla consumer vehicle today. If any, the Cybercab’s Quality Inspectors will likely be operating in uncharted territory as the vehicle is being produced using Tesla’s new Unboxed process. Elon Musk has also noted that the Cybercab’s production line will resemble a high-speed consumer electronics line instead of a conventional automotive line.
Recent Cybercab Design Evolutions
Since its October 2024 unveiling, the Cybercab has undergone several refinements visible in recent prototypes, enhancing aerodynamics and manufacturability ahead of production. The tail design now rises slightly for better airflow, with a shortened rear body panel and repositioned red reflectors farther from the wheel arches.
-->Front-end updates include segmented daytime running lights, actual turn signals and a sharper splitter, while side repeater cameras have shifted forward for improved visibility. Tesla has also enlarged door panels for easier ingress and egress, swapped to unpainted tires without extended covers and adjusted the B-pillar forward and lower, likely to foster a more open cabin feel.
News
Tesla starts laying the groundwork for FSD tests in Austria
The job opening comes as the company pushes regulatory approvals and data collection in new European markets.
Tesla seems to be ramping its efforts to hire key personnel for FSD’s eventual expansion in Europe. This was hinted at in a new job listing for a vehicle operator role in Vienna, Austria.
The job opening comes as the company pushes regulatory approvals and data collection in new European markets.
Vienna’s vehicle operator role
Tesla posted the job for “Fahrer (Vehicle Operator) (m/w/d)” in its Vienna office on its Careers website, seeking candidates to drive and monitor test vehicles as part of the Autopilot and AI team. The role involves collecting real-world driving data to refine Full Self-Driving systems for the country’s local roads. Responsibilities include operating vehicles in urban and highway environments, documenting system performance, among other tasks.
Applicants need a valid Austrian driver’s license and at least two years of driving experience. Fluency in English is essential, along with a familiarity with driver assist systems. Tesla noted that the position offers a minimum annual gross salary of EUR 32,000, though relevant professional experience and qualifications will be taken into account. Similar to other Tesla roles, the position also offers TSLA stock as an incentive.
Tesla’s FSD Push in Europe
Tesla’s FSD efforts in Europe have accelerated in recent months, with significant progress in Spain serving as a key milestone. In July 2025, Spain’s Directorate-General for Traffic launched the ES-AV framework to standardize automated vehicle testing, authorizing Tesla for nationwide FSD trials with 19 vehicles under Phase 3, which allows optional onboard safety operators and remote monitoring.
-->The program, running through November 2027, aims to position Spain as a leader in the field, as DGT stated: “The program is designed to complement and enhance oversight, regulation, research, and transparency efforts, as well as to support innovation and advancements in automotive technology and industry.”
Beyond Spain, Tesla has conducted FSD demonstrations in Germany, France and Italy for consumers, while pursuing national approval in the Netherlands for early 2026.
News
Tesla Semi factory looks almost complete during Thanksgiving weekend
Based on recent drone videos, the Tesla Semi factory looks practically ready to start operations.
It appears that the Tesla Semi factory near Giga Nevada is already hard at work preparing for the initial production of the Class 8 all-electric truck. This was, at least, hinted at in a recent drone flyover of the facility from a longtime watcher.
The Tesla Semi factory after Thanksgiving
Drone operator and Tesla Semi advocate @HinrichsZane recently shared some footage he captured of the upcoming facility during the Thanksgiving weekend. Based on his video, it appears that Tesla gave its employees in the area the weekend off. One thing is evident from the video, however, and that is the fact that the Tesla Semi factory looks practically ready to start operations.
The Tesla Semi watcher did point out that the electric vehicle maker is still busy bringing in production equipment into the facility itself. Once these are installed, it would not be surprising if initial production of the Tesla Semi begins.
A new Tesla Semi
The upcoming completion of the Tesla Semi factory near Gigafactory Nevada seems all but inevitable in the coming months. What would be especially interesting, however, would be the vehicles that would be produced on the site. During Elon Musk’s presentation at the 2025 Annual Shareholder Meeting, a glimpse of the production Tesla Semi was shown, and it looks quite a bit different than the Class 8 all-electric truck’s classic appearance.
As could be seen in the graphic from the CEO’s presentation, the updated Tesla Semi will feature slim lightbar headlights similar to the new Tesla Model Y, Cybertruck, and the Cybercab. Tesla also teased a number of aerodynamic improvements that increased the truck’s efficiency to 1.7 kWh per mile. Extended camera units, seemingly for FSD, could also be seen in the graphic.
-->
Tesla continues growing its Cybercab production team with new job listings
Tesla starts laying the groundwork for FSD tests in Austria
