

News
The Boring Company’s Las Vegas Loop tunnel project is coming to life
The Boring Company’s upcoming Loop project at the Las Vegas Convention Center appears to be coming to life, with the first images of the startup’s dig site emerging online. Images that have emerged of the startup’s activities reveal that The Boring Company has started shipping parts of a tunnel boring machine to Las Vegas, with a TBM cutter head and mixing chamber recently arriving at the location.
Initial pictures of The Boring Company’s activities were shared on Twitter last week, courtesy of @JamesInLasVegas. The photos depicted heavy machinery surrounding the tunneling startup’s dig site, including several cranes and what appeared to be a pile driver. An image of a tunnel boring machine’s cutter head was also posted.
Elon Musk's tunnel project at the Las Vegas Convention Center just went from WTF to OMFG. (via @JamesInLasVegas) @elonmusk @boringcompany pic.twitter.com/qTqgDZN8J3
— Vital Vegas (@VitalVegas) September 18, 2019
A source familiar with the Boring Company’s current activities for the Las Vegas Convention Center Loop project recently informed Teslarati that the startup’s activities have started ramping over the past few weeks. The source, who has asked to remain anonymous, added that The Boring Company has been granted a pit permit, and thus, the startup has started the construction of a secant wall for the Loop system’s passenger station located on the east end of the LVCC’s South Hall.
Similar to the initial Twitter posts that emerged of the ongoing project, the source also mentioned that parts of a tunnel boring machine started arriving Thursday night. First was what appeared to be a brand new cutter head, followed by a mixing chamber. Both these TBM parts were dropped off at a location that was visible from Desert Inn Blvd.
The Boring Company’s tunnel boring machine segments arrive at the Las Vegas site.
Interestingly, the secant wall is reportedly progressing quickly, and once this is done, excavation will soon follow. Overall, the Las Vegas Convention Center Loop appears to be progressing well, though hitting Elon Musk’s goal of completing the Loop system by the end of 2019 will likely remain a challenging task. But if the company’s digging technology is up for the challenge, the Tesla and SpaceX CEO’s timetable will likely prove feasible.
Much of the details about The Boring Company’s tunneling plans for the Las Vegas Loop system are yet to be announced. Perhaps the biggest question right now is if the startup will be deploying its next-generation TBM for the project. The Boring Company’s Hawthorne test tunnel was built using Godot, a conventional tunnel boring machine. Elon Musk has since announced that the startup is working on two new machines, a hybrid TBM named Line-Storm, which is capable of digging around twice as fast as Godot, and Prufrock, an all-electric TBM that can dig around 10-15 times faster than a conventional tunneling machine, with very little noise and zero emissions.
- The Boring Company works on a tunnel boring machine. (Credit: Teslarati)
- The Boring Company works on a tunnel boring machine.
- The Boring Company works on a tunnel boring machine.
The Boring Company works on a tunnel boring machine.
Images of what appeared to be a new TBM being assembled at the tunneling startup’s lot in the vicinity of the SpaceX headquarters in Hawthorne have been captured a few months ago. With this in mind, there seems to be a good chance that The Boring Company’s Las Vegas project could utilize one of the startup’s newer machines. Perhaps The Boring Company will play it safe and deploy Godot, which has already been tried and tested at Hawthorne, or perhaps the startup could utilize Line-Storm or Prufrock to complete the project faster.
News
Tesla dominates Cars.com’s Made in America Index with clean sweep
Tesla continues to dominate Cars.com’s Made in America Index with a clean sweep of the Top 4 spots.

Tesla has dominated the Cars.com Made-in-America Index with a clean sweep of the top four spots. All four Tesla vehicles that were eligible for the analysis placed in the top four.
The Model 3 overtook the Model Y for first place this year. The all-electric crossover was first in 2024, but the Model 3 managed to overtake its sibling vehicle to claim the top spot in 2025. The Model Y took second, while the Model S took third, and the Model X took fourth.
This is an improvement from last year, as the Model Y took first, but the Model S and Model X placed fourth and ninth, respectively. The Model 3 was not in the Top 10 in 2024.
🚨 BREAKING: https://t.co/PXZ0g1qn0E’s American-made Index for 2025 is here, and Tesla has swept the TOP FOUR spots with the Model 3 and Model Y leading the way.
The Model S and Model X follow. pic.twitter.com/7PRepTHPBe
— TESLARATI (@Teslarati) June 17, 2025
“Tesla continues to lead, claiming the top four spots and showcasing its commitment to domestic production. About 25% of the more than 400 vehicles on sale in the U.S. made this year’s AMI, and whether a vehicle is No. 1 or No.99, it contributes to the U.S. economy,” Patrick Masterson, lead researcher for the program, said.
More than 400 vehicles were analyzed for this year’s study, with Cars.com officially ranking 117 of them. There were two other EVs in the Top 10, as the Kia EV6 took sixth place, and the Volkswagen ID.4 finished in tenth.
This year’s study reflected major geographic and strategic shifts across the automotive industry. Of the 117 vehicles ranked in the program, they were produced at 36 domestic factories, leaving only 11 total factories that did not yield a car on the list. There are 47 assembly plants in operation in the U.S.
However, there still has not been a vehicle to quite reach the 100 percent domestic parts content, something that is extremely elusive. Masterson says the global supply chain is still extremely crucial to even the most American-built cars on the market.
The average domestic parts content of the Top 10 cars was 83.4 percent in 2006, but that number has shrunk to 70.3 percent in this year’s rankings.
Some might wonder where cars like the Tesla Cybertruck or Rivian R1T are on the list. However, these vehicles did not qualify because the study only considers cars under a gross weight of 8,500 pounds.
News
Tesla China roars back with highest vehicle registrations this Q2 so far
Tesla China’s 80% week-over-week growth was the most notable among Chinese EV brands.

Tesla China saw a notable rise in new vehicle registrations in the week of June 9 to 15, 2025. During the week, Tesla China’s registrations saw an impressive 80% week-over-week increase, resulting in the electric vehicle maker posting its highest insurance registration figures this Q2 so far.
Tesla China Roars Back
During the week ending June 15, 2025, Tesla China saw 15,500 insurance registrations. This represents an 80% increase from the previous week’s 8,640 units. This is also the highest number of registrations that Tesla has posted in China for the past ten weeks, as noted in a CNEV Post report.
Tesla watchers have observed that the electric vehicle maker’s 80% week-over-week growth was the most notable among Chinese EV brands. Following Tesla was Xpeng, which saw a 52% week-over-week growth to 6,400 registrations, and Nio, which saw a 9.3% week-over-week increase to 4,700 registrations.
Tesla China does not report its weekly vehicle registration figures, though the company’s overall performance in the Chinese auto market can be inferred through new vehicle registration data. Fortunately, these registrations are closely tracked and reported by industry watchers, as well as automakers like Li Auto.
Tesla Model Y Impact
Industry watchers estimate that Tesla China was able to deliver 11,200 new Model Y units to customers in the week ending June 15. This represents a week-over-week improvement of about 85% from the previous week. This bodes well for the revamped all-electric crossover, as it suggests that demand for the vehicle remains strong.
The new Model Y is Tesla’s highest volume seller. Thus, it would not be a surprise if the company’s numbers this Q2 2025 end up relying on the sales figures of the revamped all-electric crossover. Fortunately, Tesla has two more weeks before the quarter ends, which should be enough to increase its quarterly sales numbers to a notable degree.
Tesla’s domestic sales in China totaled 38,588 units in May, down 30% year-over-year but up 34% percent from April, as per data from the China Passenger Car Association (CPCA). In the same month, Giga Shanghai also exported 23,074 vehicles in May.
News
SpaceX Ax-4 Mission prepares for ISS with new launch date
SpaceX, Axiom Space, and NASA set new launch date for the Ax-4 mission after addressing ISS & rocket concerns.

SpaceX is preparing for a new launch date for the Ax-4 mission to the International Space Station (ISS).
SpaceX, Axiom Space, and NASA addressed recent technical challenges and announced a new launch date of no earlier than Thursday, June 19, for the Ax-4 mission. The delay from June 12 allowed teams to assess repairs to small leaks in the ISS’s Zvezda service module.
NASA and Roscosmos have been monitoring leaks in the Zvezda module’s aft (back) segment for years. However, stable pressure could also result from air flowing across the hatch seal from the central station. As NASA and its partners adapt launch schedules to ensure station safety, adjustments are routine.
“Following the most recent repair, pressure in the transfer tunnel has been stable,” a source noted, suggesting the leaks may be sealed.
“By changing pressure in the transfer tunnel and monitoring over time, teams are evaluating the condition of the transfer tunnel and the hatch seal between the space station and the back of Zvezda,” the source added.
SpaceX has also resolved a liquid oxygen leak found during post-static fire inspections of the Falcon 9 rocket, completing a wet dress rehearsal to confirm readiness. The Ax-4 mission is Axiom Space’s fourth private astronaut trip to the ISS. It will launch from NASA’s Kennedy Space Center in Florida on a Falcon 9 rocket with a new Crew Dragon capsule.
“This is the first flight for this Dragon capsule, and it’s carrying an international crew—a perfect debut. We’ve upgraded storage, propulsion components, and the seat lash design for improved reliability and reuse,” said William Gerstenmaier, SpaceX’s vice president of build and flight reliability.
The Ax-4 mission crew is led by Peggy Whitson, Axiom Space’s director of human spaceflight and former NASA astronaut. The Ax-4 crew includes ISRO astronaut Shubhanshu Shukla as pilot, alongside mission specialists Sławosz Uznański-Wiśniewski from Poland and Tibor Kapu from Hungary. The international team underscores Axiom’s commitment to global collaboration.
The Ax-4 mission will advance scientific research during its ISS stay, supporting Axiom’s goal of building a commercial space station. As teams finalize preparations, the mission’s updated launch date and technical resolutions position it to strengthen private space exploration’s role in advancing space-based innovation.
-
News1 week ago
I took a Tesla Cybertruck weekend Demo Drive – Here’s what I learned
-
Elon Musk2 weeks ago
Elon Musk explains Tesla’s domestic battery strategy
-
Elon Musk2 weeks ago
Tesla stock: Morgan Stanley says eVTOL is calling Elon Musk for new chapter
-
Elon Musk1 week ago
Tesla tops Cathie Wood’s stock picks, predicts $2,600 surge
-
News2 weeks ago
Tesla is missing one type of vehicle in its lineup and fans want it fast
-
News7 days ago
First Tesla driverless robotaxi spotted in the wild in Austin, TX
-
Elon Musk1 week ago
X account with 184 followers inadvertently saves US space program amid Musk-Trump row
-
Elon Musk2 weeks ago
SpaceX to decommission Dragon spacecraft in response to Pres. Trump war of words with Elon Musk