News
NASA’s Mars helicopter is ready for launch
NASA’s next Mars rover, recently dubbed Perseverance, is currently undergoing launch preparations at its launch site, the agency’s Kennedy Space Center in Florida. To that end, a key piece of hardware — the Mars helicopter — was just tested for the last time on Earth.
Weighing in at just under 4 pounds (1.8 kilograms), the helicopter’s fuselage is about the same size as a softball, and its dual blades will slice through the tenuous Martian atmosphere, rotating at nearly 3,000 rpm — roughly ten times that of its terrestrial counterparts.
The small rotorcraft, which will soon be attached to the rover’s belly, is designed to demonstrate if this technology can be used off-world. (A similar type of craft is scheduled to explore Titan, Saturn’s largest moon in the next decade.)
NASA’s Mars Helicopter will be the first aircraft to fly on another planet. The solar-powered dual-rotor craft will remain affixed to the rover after landing. Once mission managers can find an acceptable area to deploy the craft, they will begin to conduct test flights.
The helicopter will complete up to five flights over 30 days, each a little further away than the last. For its first flight, the helicopter will climb to 10 feet (3 meters) and hover for about 30 seconds.
“The ability to see clearly what lies beyond the next hill is crucial for future explorers,” Thomas Zurbuchen, associate administrator for NASA’s science mission directorate said about the craft. “We already have great views of Mars from the surface as well as from orbit. With the added dimension of a bird’s-eye view from a ‘marscopter,’ we can only imagine what future missions will achieve.”
As part of its prelaunch testing, the craft was positioned inside an airlock, and its rotors spun up to 50 RPMs. The test proved the craft functioned as expected and it will soon be attached to its rover counterpart. This final test marked the last time the rotor blades will spin until the rover reaches the Martian surface.

But before the helicopter can help us see Mars in a whole new way, it has to launch. To do so, it will hitch a ride to the red planet attached to the Mars Perseverance rover. The duo is scheduled to launch sometime in July atop a United Launch Alliance Atlas V rocket.
While the helicopter acts as a scout, Perseverance will search for signs of life on the red planet. It will also help scientists characterize the planet’s climate and geology, and ultimately collect samples for future return to Earth. Some of its on board instruments will test out technologies that will help pave the way for eventual human missions to Mars.

NASA is working with the European Space Agency (ESA)to develop a plan on how best to return the Martian samples to Earth. Sample-return missions are estimated for the mid-2020s. ESA was also working with the Russian Space Agency to send its over rover to Mars, but unfortunately, delays in parachute testing coupled with the coronavirus outbreak, has sidelined that mission until 2022.
As of now, NASA does not foresee any delays to the Perseverance Mars mission. The agency is taking steps to keep its workers safe while also prioritizing this mission as well as any crewed missions to the space station. If all goes as planned, the rover (and helicopter) will arrive on the red planet in February 2021.
News
Tesla changes vehicle computers from ‘AI’ to ‘SI,’ reflecting President Trump change
Tesla has officially changed the reference to its vehicles’ internal computers to “Super Intelligence,” or “SI,” reflecting a change that President Donald Trump made when he noted it would no longer be referred to as “Artificial Intelligence,” or “AI.”
Tesla hacker Green posted that a breakdown of Software Version 2026.44.1, noting that the in-car computer is now labeled as “SI Computer,” in system properties:
Took a peek at Tesla 2026.44.1 firmware
The huge change is that Tesla “upgraded” the “AI computer” inside to super intelligence, so it’s now referred to as “SI Computer” in car properties. 🙃
Other than this there are some minor adjustments:— green (@greentheonly) November 17, 2026
In September as he spoke at the UN’s General Assembly, President Trump said (via The Verge):
“The United States also totally rejects any attempt to construct a globalist scheme to control for the artificial intelligence being spoken of so much now. Here and after officially called “super intelligence,” changing the name, and that the use of the word artificial makes intelligence fake. It makes it sound fake, and it is not fake. It’s actually amazing. But we have to be careful. In fact, it is exactly the opposite of what it purports. From this point forward, all of the United States documents, and hopefully the world’s, will be changed to use the much more accurate term, super as opposed to artificial. So it’s super intelligence. In other words, welcome to the new world of super intelligence — SI. That’s, uh, let’s see if that does. It sounds much better. It is much better, and it’s much more accurate.”
Tesla and Musk have evidently chosen to adopt the change, as it now appears as an official reference to the company’s in-car computer.
Tesla has long used iterative software updates to refine Autopilot/FSD behavior, vehicle controls, and user interfaces. Renaming an internal identifier fits that pattern of quiet housekeeping far more closely than a sudden capability jump.
Owners on HW3 and later hardware continue to receive the same incremental FSD improvements seen in prior releases, as the property string does not alter compute allocation or model architecture.
Nevertheless, this won’t have any impact on the vehicles themselves, but it is more of an adoption of terms.
News
Tesla just doubled its Miami Robotaxi geofence
Tesla just doubled the serviceable area that its Robotaxi platform can travel in Miami, Florida.
On November 16, Tesla announced a major expansion of its Miami service area with a message stating that it would now service substantially more of the city. A new map shows the new service area, which is roughly double the initial geofence, including key urban districts into Robotaxi for the first time.
Miami’s geofence for Tesla Robotaxi has expanded considerably https://t.co/GpBqendVRN
— TESLARATI (@Teslarati) November 16, 2026
Tesla first launched unsupervised Robotaxi rides in Miami on July 3, making it the company’s initial market outside of Texas and California. The original geofence covered a very limited portion of the western Miami-Dade area, including West Miami, Doral, Sweetwater, and Miami International Airport. It was roughly 25 square miles, before a small expansion put it at about 31.
Now, Downtown Miami, the popular Brickell neighborhood, and Miami Beach, which were deliberately left outside the boundary initially, now are included in operations. Riders can now hail Model Y vehicles booked through the Tesla Robotaxi app and have run 24 hours a day since mid-November.
The map now looks to be about 59 square miles, a roughly 92 percent increase. The new eastern edge of the geofence now includes Downtown, Bickell, Wynwood, Little Havana, and the Biscayne Bay waterfront, nailing down a lot of typical tourist locations for Miami visitors. Additionally, the new geofence also extends North, reaching Hialeah, and adding coverage closer to the airport corridor.
At its widest, the zone now stretches roughly 11 miles from west to east. Miami Beach remains outside the service area, though Elon Musk previously indicated beach coverage was “coming soon” after Florida Governor Ron DeSantis publicly called for it.
Relative to Tesla’s other markets, Miami’s roughly 59-square-mile zone is now larger than Orlando (about 26 square miles) and Tampa (about 24 square miles) combined.
It remains smaller than Texas hubs such as Austin (around 443 square miles), San Antonio (about 275), Houston (about 254), and Fort Worth (about 143), but the rapid growth brings it closer to competitor Waymo’s approximately 60-square-mile Miami footprint, which already includes beach areas.
For Miami residents and visitors, the expansion makes driverless rides practical for trips into the city’s densest commercial and residential core, offering a new option amid heavy traffic and limited parking.
For Tesla, covering higher-demand downtown corridors should increase ride volume, generate more real-world autonomy data, and strengthen its competitive position as it scales the Robotaxi network toward broader profitability and eventual Cybercab deployment. The overnight growth also signals accelerating operational confidence less than five months after the city’s launch.
Cybertruck
Tesla tuner pleading to save Cybertruck also wants to build CyberSUV
Tesla tuner Unplugged Performance, the company pleading to save the Cybertruck, detailed in a new phase of its plan to rescue manufacturing lines from Gigafactory Texas that it would also build a three-row CyberSUV.
UP has already navigated a lot of the difficult thought work, including how it will woo Tesla to turn over the all-electric pickup’s production lines at no cost or risk to them. Tesla has signaled it will wind down Cybertruck output at Gigafactory Texas sometime around the middle of next year.
Unplugged, the Hawthorne-based aftermarket specialist that has tuned Teslas since 2013, first floated an open offer on November 10 and followed with a more specific “Phase 3” outline on November 15. Under the structure, outside investors would fund the new company.
82% of respondents want a three-row CyberSUV. The line to build it is about to be dismantled. Our proposal keeps it alive at no added cost to Tesla. Tesla keeps the IP, signs its first FSD license, and earns on every vehicle.
👇 https://t.co/y9y33EuLPr— UP (@UnpluggedTesla) November 15, 2026
The line would leave Giga Texas on Tesla’s schedule, supplier contracts would transfer, and Unplugged would hire its own staff, drawing from interested Tesla alumni, without pulling current Tesla employees or engineering resources.
Tesla would retain intellectual-property ownership, final say on specifications and brand, a quality veto, and an option to reclaim the line. In return, Tesla would collect a license fee on every vehicle plus margin on parts it continues to supply, Full Self-Driving and Robotaxi revenue, and a no-cost equity stake in the new entity.
If Unplugged cannot meet demand or capital targets Tesla sets, it would withdraw.
UP looked at the overwhelming demand for a full-size SUV, something that Tesla has had a lot of demand for but has not developed internally. A poll put out by the tuner that surveyed 892 responses showed 82 percent of voters favored a CyberSUV. There is a substantially deeper market for three-row SUVs priced above $80,000 compared to pickups.
Not to mention, the new body tooling plus limiting other changes from the Cybertruck line would enable the company to use the existing platform to produce an all-terrain family vehicle while continuing to produce Cybertruck builds at a modest incremental cost.
Tesla has already shown interest in a CyberSUV, as it hid Cybertruck-inspired clay models of what appeared to be a full-size SUV in a video last year:
The proposal from UP also contemplates multiple configurations that would enable owners to utilize a full-fledged Robotaxi in the form of a CyberSUV, aiming to build one with conventional controls for private buyers while a no-wheel/pedal version would be available for the Robotaxi fleet.
Tesla has made it clear that its manufacturing space and cell capacity is set aside for Cybercab, but UP already has soft commitments from a conglomeration of investors, but it all hinges on Tesla’s willingness to engage.