Connect with us

News

SpaceX aborts Starship hop debut a second time, kicks off third attempt [updated]

Starship SN5's hop debut has been delayed a second time. (NASASpaceflight - bocachicagal)

Published

on

Update: SpaceX has gone ahead with a second Starship SN5 hop test attempt of the day. The rocket is currently tracking towards liftoff sometime around 7pm CDT (00:00 UTC).

SpaceX has aborted its inaugural Starship hop test for the second time but Elon Musk thinks there might still be time for another Tuesday attempt.

This time around, the fifth full-scale Starship prototype (SN5) made it roughly 90 seconds away from a planned Raptor engine ignition and liftoff before an apparent abort was called. The rocket was gradually detanked over the course of an hour or so, while CEO Elon Musk took to Twitter to suggest SpaceX might be able to fit another attempt in later today.

Starship SN5’s hop debut has been delayed a second time but another attempt could still be possible later today. (NASASpaceflight – bocachicagal)

As of now, SpaceX employees have returned to the launch pad and are busy inspecting Starship SN5 – with a focus on the inside of the rocket’s engine section, where Raptor SN27 is installed. SpaceX has already suffered two aborts – one during a July 28th static fire attempt and the other during the first hop attempt on August 3rd – related to valves Raptor SN27 uses to spin up turbopumps.

As previously discussed on Teslarati, the seeming commonality between both aborts raises some concerns.

Advertisement

Musk says that one of Raptor engine SN27’s “spin start valves” failed to open moments before ignition, causing Starship to automatically abort the attempt. With more than an hour left in the window, SpaceX had time to briefly troubleshoot the bug and potentially turn the rocket around for a second attempt, but Musk announced some 50 minutes later that the company would stand down and try again tomorrow.

Musk’s description of the hop test abort sounds suspiciously similar to his description of the last abort of Starship SN5’s Raptor engine static fire test, in which a “fuel spin valve didn’t open.” If the root cause of both aborts is the same, there’s a good chance that SpaceX may need more time to properly investigate and fix the problem. A recurring issue is immediately much more concerning compared to a one-off bug, so there’s also a chance that SpaceX will go as far as replacing the Raptor engine currently installed on Starship SN5.


Teslarati.com — August 3rd, 2020

The sun rises over Starship SN5 ahead of its first hop attempt on August 3rd. (NASASpaceflight – bocachicagal)

As of noon local time, a team had returned to the pad after Starship SN5 was safe to approach. The fact that the focus, again, appeared to be on Raptor SN27 means that the second hop test abort could theoretically be attributed to the same valve issue that aborted the last static fire and first hop attempts. Beyond that pure speculation, the cause of today’s abort is unknown but should not come as a surprise for an aerospace prototype test campaign.

In a positive sign, despite SpaceX employees returning to the pad around four hours ago, the highway has remained closed to members of the public, implying that SpaceX is still pushing for a second hop attempt later today. The August 4th test window is open until 8pm CDT (01:00 UTC). Stay tuned for updates later this evening.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Advertisement

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Tesla launches 200mph Model S “Gold” Signature in invite-only purchase

Tesla’s final 350-unit Signature Edition closes the book on two cars that changed everything.

Published

on

By

Tesla has announced a super limited Signature Edition run of 250 Model S Plaid and 100 Model X Plaid units as an invite only purchase in a bid to give its original flagship vehicles a proper send-off.

When the Model S first launched in 2012, the first 1,000 units sold were “Signature” editions that required a $40,000 deposit and cost nearly $100,000 each. Those early buyers were Tesla’s first real believers. This new Signature Edition deliberately echoes that moment, bookending a 14-year run with numbered collector hardware.

Both models are finished in an exclusive Garnet Red paint not available on any current Tesla production vehicle, with gold Tesla T badges up front, a gold Plaid badge and Signature badge at the rear, and a white Alcantara interior featuring gold Plaid seat badges, gold piping, Signature-marked door sills, and a numbered dash plate. The Model S adds carbon ceramic brakes with gold calipers. Every unit ships with Tesla’s Luxe Package, bundling Full Self-Driving (Supervised), four years of Premium Service, free lifetime Supercharging, and a Signature Edition key fob. Both are priced at $159,420, a roughly $35,000 premium over standard Plaid inventory.

The discontinuation is part of a broader strategic shift. At Tesla’s Q4 2025 earnings call, Musk described the decision as “slightly sad” but necessary, saying: “It’s time to basically bring the Model S and X programs to an end with an honorable discharge, because we’re really moving into a future that is based on autonomy.”

The Fremont factory floor that built these cars is being converted to manufacture Optimus humanoid robots, with a target of one million units annually.

Continue Reading

Elon Musk

Tesla FSD in Europe vs. US: It’s not what you think

Tesla FSD is approved in the Netherlands, but the European version differs from what US drivers use.

Published

on

By

Tesla FSD 14.3 [Credit: TESLARATI)

On April 10, 2026, the Dutch vehicle authority RDW granted Tesla the first European type approval for Full Self-Driving Supervised, making the Netherlands the first country on the continent to authorize Tesla’s semi-autonomous system for customer use on public roads.

As Teslarati reported, the RDW approval followed 18 months of testing, more than 1.6 million kilometers driven on EU roads, 13,000 customer ride-alongs, and documentation covering over 400 compliance requirements. Tesla Europe had been running public demo drives through cities like Amsterdam and Eindhoven since early 2026, giving passengers their first experience of the system on European streets.


The European version of FSD is not the same software US drivers use. The RDW’s own statement is direct, noting that the software versions and functionalities in the US and Europe “are therefore not comparable one-to-one.” We’ve compile a table below that captures the most significant differences between US-based Tesla FSD vs. European Tesla FSD that’s based on what regulators and Tesla have publicly confirmed.

Feature FSD US FSD Europe (Netherlands)
Regulatory framework Self-certification, post-market oversight Pre-market type approval required (UN R-171 + Article 39)
Hands requirement Hands-off permitted on highway Hands must be available to take over immediately
Auto turning from stop lights Available — navigates intersections, turns, and traffic signals autonomously Available in EU build — confirmed in Amsterdam demo footage handling unprotected turns and signalized intersections
Driving modes Multiple profiles including a more aggressive “Mad Max” mode EU build is more conservative by default and errs on the side of restraint when it cannot confirm the limit
Summon Available — Smart Summon navigates parking lots to driver Status unclear — not confirmed as part of the RDW-approved feature set; urban FSD approval targeted separately for 2027
Driver monitoring Camera-based eye tracking Stricter continuous monitoring with more frequent intervention alerts
Software version FSD v14.3 EU-specific builds that must be separately validated by RDW
Geographic restriction US, Canada, China, Mexico, Australia, NZ, South Korea Netherlands only; EU-wide vote pending summer 2026
Subscription price $99/month €99/month
Full urban FSD scope Available Partial — separate urban application planned for 2027

The approval comes as Tesla is under real pressure to grow FSD subscriptions globally. Musk’s 2025 CEO compensation package, approved by shareholders, includes a milestone requiring 10 million active FSD subscriptions as one condition for his stock awards to vest. Tesla hit one million subscriptions during its Q4 2025 earnings call, which is a meaningful start, but still a long way from the target. Opening Europe as a market for subscriptions, rather than just hardware sales, directly accelerates that number.

Tesla has said it anticipates EU-wide recognition of the Dutch approval during summer 2026, which would extend FSD access to Germany, France, and other major markets through a mutual recognition process without each country repeating the full 18-month review. That timeline is Tesla’s projection, not a confirmed regulatory outcome. As Musk acknowledged at Davos in January 2026, “We hope to get Supervised Full Self-Driving approval in Europe, hopefully next month.”

Continue Reading

News

Tesla’s troublesome Auto Wipers get a major upgrade

Tesla has quietly deployed a major over-the-air (OTA) update across its entire fleet, implementing a new patent that could finally solve one of the most complained-about features in its vehicles: the Auto Wipers.

Published

on

One of Tesla’s most complained-about features is that of the Auto Wipers, but they have recently received a major upgrade that impacts every vehicle in the company’s fleet, a company executive confirmed.

Tesla has quietly deployed a major over-the-air (OTA) update across its entire fleet, implementing a new patent that could finally solve one of the most complained-about features in its vehicles: the Auto Wipers.

Confirmed by senior Tesla AI engineer Yun-Ta Tsai on April 10, the improvement is based on patent US 20260097742 A1. It introduces an “energy balance model” that adds a tactile, physics-driven layer to the existing camera-based system—without requiring any new hardware.

Tesla drivers have griped about auto wipers since the company ditched traditional rain sensors in favor of Tesla Vision around 2018.

Owners routinely report the wipers failing to activate in light drizzle or mist, leaving windshields streaked and visibility dangerously reduced. Just as often, they formerly blasted into high-speed mode on dry, sunny days, screeching across glass and risking scratches or premature blade wear.

This is a rare occurrence anymore, but many owners still report the feature having the wipers perform at the incorrect speed or frequency when precipitation is falling.

Tesla has tried repeatedly to fix the problem through software alone.

Early “Deep Rain” initiatives and the 2023 Autowiper v4 update used multi-camera video and refined neural networks, with Elon Musk promising “super good” performance. The 2024.14 update added manual sensitivity boosts, and later FSD versions claimed further gains. Yet complaints persisted.

Elon Musk apologizes for Tesla’s quirky auto wipers, hints at improvements

Vision systems struggle with edge cases—glare, bugs, reflections, or faint mist—because they rely purely on visual inference rather than physical detection

The new patent takes a different approach. The car’s computer constantly measures electrical power delivered to the wiper motor. It subtracts predictable losses—internal motor friction, linkage drag, and aerodynamic resistance—leaving only the friction force between the rubber blade and windshield glass.

Water lubricates the glass, sharply reducing friction; dry or icy surfaces increase it dramatically. This real-time “tactile” data acts as an independent check on the camera’s visual cues, instantly shutting down false triggers on dry glass and fine-tuning speed for actual rain.

The system can also detect ice and auto-activate defrost heaters, while long-term friction trends alert drivers when blades need replacing.

By fusing vision with precise motor-load physics, Tesla has created a hybrid sensor that is both elegant and cost-free. Owners have waited years for reliable auto wipers; this OTA rollout may finally deliver them.

Continue Reading