Connect with us

News

SpaceX’s first high-altitude Starship a week away from completion, says Elon Musk

Starship SN8 (center right) is on track to become the first high-altitude prototype after flap, nosecone, and Raptor installation. (NASASpaceflight - bocachicagal)

Published

on

CEO Elon Musk says that SpaceX’s first high-altitude Starship prototype – built entirely out of a new steel alloy – will be fully assembled “about a week” from now.

On August 4th, SpaceX successfully hopped a full-scale Starship prototype (serial number 5 or SN5) for the first time, reaching the same 150m (~500 ft) apogee Starhopper soared to just shy of one year prior. On September 3rd, just 30 days later, Starship SN6 – an entirely different full-scale prototype with a different Raptor engine – completed an identical 150m hop, though Musk noted that it was “a much smoother & faster operation.” Indeed, the whole purpose of performing the same hop with two nearly identical ships was to develop and optimize the nascent process of Starship flight testing.

Musk’s indication that “several” short hops would be performed strongly implied that SN5, SN6, or both ships would fly a second time. Now, though, Musk – supported by a NASASpaceflight.com report – appears to be suggesting that the first high-altitude Starship (SN8) is up next on the docket.

Technicians prepare to install functional flaps on a Starship prototype for the first time ever. (NASASpaceflight – bocachicagal)

According to NASASpaceflight, SpaceX is now working towards the first high-altitude launch of Starship SN8 as early as October. Prior to that ambitious test flight, though, several critical milestones stand in the way. Unmentioned, Starship test tank SN7.1 may be hours away from kicking off a cryogenic stress test crucial to the future of Starship SN8 and several of its successors. Built out of a steel alloy that is somewhat more ductile and pliable at cryogenic temperatures, a successful SN7.1 stress test would open the door for SN8 – the first full-scale prototype built out of the same new alloy – to begin testing immediately thereafter.

As with all tests, though, failure is a strong possibility and would likely require more analysis of the new steel alloy and some level of redesign for several affected Starship components. In that event, Starship SN8 would likely serve as a test tank instead of becoming the first high-altitude flight article. SN7.1’s trials are set to begin no earlier than (NET) 9pm CDT (UTC-5) on September 14th and could continue all the way up to September 23rd.

New and improved Starship flaps first arrived in Texas all the way back in June and were recently joined by several more to complete two full sets of four. (NASASpaceflight – bocachicagal)

Meanwhile, SpaceX is working around the clock to outfit Starship SN8 and prepare the ship for the installation of a nosecone section and four aerodynamic control surfaces known as flaps. Unlike Starship Mk1, which was temporarily outfitted with flaps and a nosecone more as a full-size mockup than a flight article, there is a very real chance that Starship SN8 will actually perform a flight test with its nose and flaps installed.

Unlike the Space Shuttle or other proposed spaceplanes, SpaceX’s current Starship design incorporates flaps to ensure aerodynamic stability while free-falling belly-first through the atmosphere, akin to a skydiver using arms and legs to steer through the air.

Advertisement

If Musk’s schedule is accurate, Starship SN8 could be fully outfitted with a nosecone and flaps and ready to roll to the launch pad for testing as early as next week. Prior to the first 20 km (~12.5 mi) hop and skydiver-style landing attempt, Musk says that SpaceX will put SN8 through a static fire test (possibly the first with three Raptor engines). If it survives, the rocket will be carefully inspected before performing a second static fire test. If that second test is successful, SN8 will finally be cleared for Starship’s first high-altitude launch and landing attempt.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Elon Musk takes aim at Bill Gates’ Microsoft with new AI venture “Macrohard”

It is quite an appropriate name for a company that’s designed to rival Microsoft.

Published

on

Credit: xAI/X

Elon Musk has set his sights on Microsoft with a new company called “Macrohard,” a software venture tied to his AI startup, xAI. 

Musk described the project as a “purely AI software company” that’s designed to generate hundreds of specialized coding and generative AI agents that could one day simulate products from companies like Microsoft entirely through artificial intelligence.

Macrohard‘s Purpose

Musk announced Macrohard on Friday, though xAI had already registered the trademark with the US Patent Office a few weeks ago, as noted in a PC Mag report. Interestingly enough, this is not the first time that Musk has mentioned such an initiative.

Just last month, he stated that xAI was “creating a multi-agent AI software company, where Grok spawns hundreds of specialized coding and image/video generation/understanding agents all working together and then emulates humans interacting with the software in virtual machines until the result is excellent.”

At the time, Musk stated that “This is a macro challenge and a hard problem with stiff competition,” hinting at the venture’s “Macrohard” moniker. A few years ago, Musk also posted “Macrohard >> Microsoft” on X. 

Advertisement

Powered by xAI and Colossus

Macrohard appears to be closely linked to xAI’s Colossus 2 supercomputer project in Memphis. Musk has confirmed plans to acquire millions of Nvidia GPUs, joining rivals such as OpenAI and Meta in a high-stakes race for AI computing power. Colossus is already one of the most powerful supercomputer clusters in the world, and it is still being expanded.

xAI is only a couple of years old, having been founded in March 2023. During its Engineering Open House event in San Francisco, Elon Musk highlighted that the company’s speed will be its primary competitive edge. “No SR-71 Blackbird was ever shot down and it only had one strategy: to accelerate,” Musk said.

Continue Reading

Elon Musk

Elon Musk confirms he’s still in wartime CEO mode

He is still locked in.

Published

on

Wcamp9, CC BY 4.0 , via Wikimedia Commons

Elon Musk tends to use social media platform X as his personal platform to express himself, so much so that critics tend to allege that the CEO is no longer serious about his numerous companies. 

As per Musk, he is still very much in wartime CEO mode, despite all the jokes and fun posts about Ani on X. 

Elon Musk leads several prolific companies, much more than the average CEO. And while Tesla is the only publicly traded entity that he currently leads, Musk is so visible that everyone across the internet pretty much has a strong opinion of him one way or another. For his longtime supporters and followers, however, what truly matters is if Musk is locked in.

Considering that Elon Musk’s feed on X has recently been filled with AI imagery, a good portion of which involve AI-rendered women, some X users have expressed concerns that the CEO may be losing focus once more. Musk responded to one such user by highlighting his very busy schedule and his numerous active projects. 

Needless to say, Elon Musk is still locked in. He is still in “wartime CEO” mode.

Advertisement

As per the CEO, even his recent AI posts about AI are “part of a broader vision and strategy.” He also highlighted that SpaceX’s Starship Flight 10 is launching in a few days, xAI’s Grok 5 is starting its training next month, and Tesla’s Autopilot V14 is also coming next month. As per Musk, “long-term strategy is compelling.”

Elon Musk’s comments are quite accurate. While he may seem to spend all his time on X, after all, he is very much still neck-deep in all his companies’ projects. There is a reason why Musk became known as a visionary, and a lot of it is because he really is intimately involved in all of his companies’ projects. 

Continue Reading

News

Tesla watchers spot mysterious castings at Fremont Factory

The castings seem to be quite new, as they do not seem to match any of the castings that are currently being used for the Model Y.

Published

on

Credit: @metgodinwilderness7130/YouTube

A recent flyover of the Fremont Factory has triggered speculations about Tesla’s ongoing initiatives that are yet to be unveiled publicly. This was hinted at by the sighting of some apparent vehicle castings around the factory that have never really been observed before.

A Fremont Factory flyover

In a recent update, drone operator Met God in Wilderness, who has been chronicling the progress and developments of the Fremont Factory for years, shared some footage from his August 14, 2025 flyover. Based on the video, the Fremont Factory seemed very much alive. Vehicles were being pumped out of the factory, and a rather interestingly covered car could be seen going around the test track.

What is quite fascinating about the footage from the Fremont Factory is the fact that the vehicles that were moving from the production line to the outbound logistics lot are not driven manually anymore. As per Tesla in previous updates, vehicles produced at the Fremont Factory navigate to the outbound logistics lot on their own using Unsupervised FSD

Mysterious castings

Perhaps most interestingly, the drone operator also managed to capture some footage of some castings that were being gathered just outside one of the facility’s sprung structures. These castings seem to be quite new, as they do not seem to match any of the castings that are currently being used for the Model Y. This has brought speculations suggesting that the new components, which seem smaller than standard Model Y megacasts, may be for a different, perhaps more compact, vehicle. 

As per Tesla in its second quarter earnings call, the company actually started the initial production of more affordable models sometime in June. These vehicles, as per Elon Musk, will be made available for consumers in the fourth quarter. “Given that we started in North America and that our goal is to maximize production with higher rates by the end of Q3, we’re going to keep pushing hard on our current models to avoid complexity… We’ll be running with the more affordable models available for everyone in Q4,” Musk said.

Advertisement

Watch the recent drone footage of the Fremont Factory in the video below.

Continue Reading

Trending