News
SpaceX COO says Starlink is just five launches away from “full global connectivity”
The day before SpaceX aced its eighth Starlink launch in three months, President and COO Gwynne Shotwell implied that the company’s constellation of satellites could achieve “full [global] connectivity” just a handful of months from now.
Speaking at Satellite 2021’s “LEO Digital Forum” on April 6th, Shotwell revealed that SpaceX hopes to cross that milestone a few months after a total of 28 operational Starlink launches have been completed. Around 25 hours after her panel appearance, SpaceX launched its 490th Starlink satellite of the year, more or less wrapping up the first quarter of 2021.
SpaceX’s April 7th Starlink launch and booster landing was the 23rd successful launch of operational ‘v1.0’ satellites since they began flying in November 2019. All told, of the 1383 operational satellites launched by SpaceX in those 17 months, some 1369 are still in orbit, at least 1356 are functioning as expected, and more than 900 have reached their final orbits and are operational. Another 400 appear to be in long-term parking orbits dozens to hundreds of kilometers below their operational 550 km (~340 mi) ceiling, the purpose of which is unclear.
Once the 400-500 satellites now in low parking orbits reach whatever orbital parameters they’re waiting on, it’s unlikely to take more than two or three months for them to boost up to an operational altitude. Starlink-23 added another 60 around 250 km (155 mi). All told just the satellites SpaceX has in parking orbits are several times larger than the next largest constellations.
Given Shotwell’s 28-launch comment and a general idea of SpaceX’s 2021 launch cadence targets, it’s possible to extrapolate to a reasonably accurate timeline for the constellation to reach a point of “full connectivity globally” – albeit with a few caveats. First, it’s unclear what exactly the SpaceX President and COO meant with that phrase, given that SpaceX will require a substantial number of polar orbit satellites before Starlink can truly cover every single inch of Earth’s surface.
If Shotwell is including one or more dedicated polar Starlink launches in her rough 28-launch estimate, Starlink’s global connectivity timeline is effectively a complete mystery until SpaceX offers more information on its plans to build out that segment of its constellation. If she isn’t accounting for total polar coverage and means something akin to “full connectivity” for ~99% of the global population, though, it’s a simple task to estimate when Starlink might reach that milestone.
While SpaceX appears to be standing down Starlink launches for around two weeks to focus fully on Crew Dragon’s second operational astronaut launch (Crew-2), the company is expected to jump right back to rapid-fire Starlink launches in the last week or so of April. If, from that point on, SpaceX matches its Q1 2021 average and manages one Starlink mission every ~12 days, Starlink-28 could launch in late-June – and possibly even earlier. From then on, it’s just a matter of verifying each satellite’s health in space before allowing the spacecraft to boost up to their operational orbits.
In other words, barring unprecedented numbers of early satellite failures or unusually long orbit-raising periods, it’s likely that SpaceX will have enough operational satellites – around 1700 – for near-total, uninterrupted Starlink coverage of the inhabited world by the end of Q3 (September) 2021.
-
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla Summer Update begins rolling out: a look at the new features
Tesla briefly offered this Robotaxi part for your personal car
