Tesla is adding another tent to its Fremont Factory property, but it will not directly be used for production. Along with the new tent, Tesla has filed for several other things at Fremont, including Model S and Model X manufacturing line upgrades, and an update to the battery equipment production line project that Teslarati revealed in late August.
A new tent at Fremont, but not for production
Tesla has long utilized a heavy-duty tent known as a Sprung Structure for the production of the Model 3 and Model Y. Tesla has two of these “tents” on the Fremont property that it uses for automotive production, which are commonly referred to as General Assembly 4 and General Assembly 4.5.
The tents were initially thought to be a temporary place for production, but Tesla has since kept the structures built. In February 2021, Teslarati showed that Tesla filed with the City of Fremont to make the GA 4.5 tent permanent. The automaker applied for foundation implementations and permits to install below-ground utilities under the structure. It was part of a 64,000-square foot expansion of GA 4.5, as the Model Y had become Tesla’s most popular vehicle. It was also the only factory building the Model Y at the time.
Tesla has now filed to build yet another “temporary exterior tent,” according to filings seen by Teslarati. The company does not plan to utilize it for automotive production, at least not directly. Instead, the tent will provide coverage for tools, likely so they can be moved outside the production space but still be nearby and protected. The project’s cost is listed as $140,000.
Space and storage have been an issue for Tesla at the Fremont factory. A Morgan Stanley note from earlier this year indicated that Tesla was extremely confined in the factory, and expansion seemed like the only obvious option.
Tesla is considering a significant expansion of its Fremont Factory
Of course, Tesla is expanding with other factories, but Fremont is its longest-standing automotive manufacturing property. It is the only factory Tesla has producing all four vehicles, and the company has discussed expanding the property considerably. Elon Musk said earlier this year that Tesla was considering making the factory larger to accommodate more production. Teslarati reported on filings and drone footage that revealed Tesla may be taking early steps to make Fremont considerably larger so it can build more vehicles.
Battery Manufacturing Equipment Line Update
In late August, we reported that Tesla had filed to build a battery manufacturing equipment line on the second floor of the Fremont Factory. The project was valued at $1.5 million.
Tesla said in the filing:
“NEW BATTERY MANUFACTURING EQUIPMENT LINE ON 2ND FLOOR OF MAIN ASSEMBLY BUILDING. THIS PERMIT APPLICATION RELATES TO THE MODULE PORTION OF THE LINE.”
Another filing with the City of Fremont reveals Tesla is making progress on the project. It is now moving forward with the site plan, including the equipment layout, exhaust, power for the equipment, and a process piping plan. Tesla reiterated this project is taking place on the second floor:
“This project is located on the second floor of assembly building. Package will include equipment layout, tool anchorage plan, exhaust, power for equipment, and process piping plan.”
This filing is separate from the previous one and also has a cost of $1.5 million.
Model S and Model X manufacturing equipment upgrades
Tesla has also made numerous upgrades on the Model S and Model X production lines. On August 23, Tesla installed new rocker cell tools, and associated utilities which are automated arms used in production.
On September 20, Tesla also filed to install a new SubFrame Lift Assist, which “will help improve production associates’ ergonomic safety,” the automaker said in the filing.
I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.
Elon Musk
SpaceX issues statement on Starship V3 Booster 18 anomaly
The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX has issued an initial statement about Starship Booster 18’s anomaly early Friday. The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX’s initial comment
As per SpaceX in a post on its official account on social media platform X, Booster 18 was undergoing gas system pressure tests when the anomaly happened. Despite the nature of the incident, the company emphasized that no propellant was loaded, no engines were installed, and personnel were kept at a safe distance from the booster, resulting in zero injuries.
“Booster 18 suffered an anomaly during gas system pressure testing that we were conducting in advance of structural proof testing. No propellant was on the vehicle, and engines were not yet installed. The teams need time to investigate before we are confident of the cause. No one was injured as we maintain a safe distance for personnel during this type of testing. The site remains clear and we are working plans to safely reenter the site,” SpaceX wrote in its post on X.
Incident and aftermath
Livestream footage from LabPadre showed Booster 18’s lower half crumpling around the liquid oxygen tank area at approximately 4:04 a.m. CT. Subsequent images posted by on-site observers revealed extensive deformation across the booster’s lower structure. Needless to say, spaceflight observers have noted that Booster 18 would likely be a complete loss due to its anomaly.
Booster 18 had rolled out only a day earlier and was one of the first vehicles in the Starship V3 program. The V3 series incorporates structural reinforcements and reliability upgrades intended to prepare Starship for rapid-reuse testing and eventual tower-catch operations. Elon Musk has been optimistic about Starship V3, previously noting on X that the spacecraft might be able to complete initial missions to Mars.
Investor's Corner
Tesla analyst maintains $500 PT, says FSD drives better than humans now
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Tesla (NASDAQ:TSLA) received fresh support from Piper Sandler this week after analysts toured the Fremont Factory and tested the company’s latest Full Self-Driving software. The firm reaffirmed its $500 price target, stating that FSD V14 delivered a notably smooth robotaxi demonstration and may already perform at levels comparable to, if not better than, average human drivers.
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Analysts highlight autonomy progress
During more than 75 minutes of focused discussions, analysts reportedly focused on FSD v14’s updates. Piper Sandler’s team pointed to meaningful strides in perception, object handling, and overall ride smoothness during the robotaxi demo.
The visit also included discussions on updates to Tesla’s in-house chip initiatives, its Optimus program, and the growth of the company’s battery storage business. Analysts noted that Tesla continues refining cost structures and capital expenditure expectations, which are key elements in future margin recovery, as noted in a Yahoo Finance report.
Analyst Alexander Potter noted that “we think FSD is a truly impressive product that is (probably) already better at driving than the average American.” This conclusion was strengthened by what he described as a “flawless robotaxi ride to the hotel.”
Street targets diverge on TSLA
While Piper Sandler stands by its $500 target, it is not the highest estimate on the Street. Wedbush, for one, has a $600 per share price target for TSLA stock.
Other institutions have also weighed in on TSLA stock as of late. HSBC reiterated a Reduce rating with a $131 target, citing a gap between earnings fundamentals and the company’s market value. By contrast, TD Cowen maintained a Buy rating and a $509 target, pointing to strong autonomous driving demonstrations in Austin and the pace of software-driven improvements.
Stifel analysts also lifted their price target for Tesla to $508 per share over the company’s ongoing robotaxi and FSD programs.
Elon Musk
SpaceX Starship Version 3 booster crumples in early testing
Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
SpaceX’s new Starship first-stage booster, Booster 18, suffered major damage early Friday during its first round of testing in Starbase, Texas, just one day after rolling out of the factory.
Based on videos of the incident, the lower section of the rocket booster appeared to crumple during a pressurization test. Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
Booster test failure
SpaceX began structural and propellant-system verification tests on Booster 18 Thursday night at the Massey’s Test Site, only a few miles from Starbase’s production facilities, as noted in an Ars Technica report. At 4:04 a.m. CT on Friday, a livestream from LabPadre Space captured the booster’s lower half experiencing a sudden destructive event around its liquid oxygen tank section. Post-incident images, shared on X by @StarshipGazer, showed notable deformation in the booster’s lower structure.
Neither SpaceX nor Elon Musk had commented as of Friday morning, but the vehicle’s condition suggests it is likely a complete loss. This is quite unfortunate, as Booster 18 is already part of the Starship V3 program, which includes design fixes and upgrades intended to improve reliability. While SpaceX maintains a rather rapid Starship production line in Starbase, Booster 18 was generally expected to validate the improvements implemented in the V3 program.
Tight deadlines
SpaceX needs Starship boosters and upper stages to begin demonstrating rapid reuse, tower catches, and early operational Starlink missions over the next two years. More critically, NASA’s Artemis program depends on an on-orbit refueling test in the second half of 2026, a requirement for the vehicle’s expected crewed lunar landing around 2028.
While SpaceX is known for diagnosing failures quickly and returning to testing at unmatched speed, losing the newest-generation booster at the very start of its campaign highlights the immense challenge involved in scaling Starship into a reliable, high-cadence launch system. SpaceX, however, is known for getting things done quickly, so it would not be a surprise if the company manages to figure out what happened to Booster 18 in the near future.
SpaceX issues statement on Starship V3 Booster 18 anomaly
Tesla analyst maintains $500 PT, says FSD drives better than humans now
