Elon Musk has once again teased the “Banish” feature that could come to Tesla vehicles in the near future. It would be a perfect pairing to the popular Assisted Smart Summon (ASS), which the company launched earlier this year.

Banish has been something Tesla has teased for years. The company has promised the possibility of completely hands-off parking: arrive, drop off at the entrance, the car parks itself, and the car retrieves you at the end of your visit.

Ultimately, even though it is technically a driverless feature, Tesla has not refined its parking portion of the Full Self-Driving (Supervised) suite enough to release Banish to the public.

Tesla recently started performing specified parking tasks at the driver’s discretion. In the FSD (Supervised) v14.1 release, Tesla has added the ability to pick your parking scenario. Drivers can choose a Charger, Parking Lot, Curbside, Street, Driveway, or Parking Garage.

To achieve Banish, Tesla would have to gather enough data with these scenarios to then gain the capability to park after dropping vehicle occupants off.

🚨 Tesla Full Self-Driving (Supervised) v14.1’s new Arrival Options pic.twitter.com/P8GDY7BIZ6

— TESLARATI (@Teslarati) October 10, 2025

However, CEO Elon Musk recently hyped Banish to the point of stating Teslas will be capable of it “in the near future.”

His remark came in response to a video where FSD v14.1 drove around a Costco parking lot for twenty minutes looking for a spot:

In the near future, your Tesla will drop you off at the store entrance and then go find a parking spot.

When you’re ready to exit the store, just tap Summon on your phone and the car will come to you. https://t.co/7oUEk9Bb0H

— Elon Musk (@elonmusk) October 10, 2025

Summon is a feature that has given Tesla its challenges, but the release of Assisted Smart Summon (ASS) has improved some of its capabilities.

I tested it after receiving v14.1, and it did a great job of taking the correct route and driving safely to my location:

🚨 There were no noted improvements to Tesla’s Actually Smart Summon (ASS) with the v14.1 Full Self-Driving (Supervised) update

However, with v13.2.9, ASS turned the wrong way on this exact route.

Not this time! Exceptionally done! pic.twitter.com/vYHL0zjlOk

— TESLARATI (@Teslarati) October 10, 2025

There will likely be some time between now and when Tesla is able to release Banish. As previously noted, Tesla will need to collect enough data from real-world scenarios and obtain a proven track record of being able to handle lots and parking in a variety of environments while supervised.

Just over a month after the Swedish Meditation Institute threw in the towel on Tesla and IF Metall’s conflict, the labor union has announced a new industrial action aimed at disrupting the electric vehicle maker’s operations in the country. 

Potential Tesla disruptions

The latest news involves a total work stoppage by Linde Material Handling, one of Sweden’s largest forklift companies, which services industrial clients nationwide. The action takes effect October 15 and will remain in place until Tesla signs a collective agreement, as noted in a Dagens Arbete (DA) report.

The stoppage will halt all forklift-related work Linde performs for Tesla’s local subsidiary, TM Sweden, including maintenance, repair, and service of trucks used across its facilities. Simon Petersson, IF Metall’s contract secretary, shared described the union’s latest effort in a comment to the publication.

“We know that Tesla has trucks in several locations and that they are in need of service, maintenance and repair. We are stopping that now. For Linde, this is not a big deal. They service trucks for a lot of companies and Tesla is a small player in their portfolio,” Petersson noted.

Not a sure strategy

Whether IF Metall’s latest effort will succeed against Tesla remains to be seen, especially since the electric vehicle maker has been pretty firm in its stance that its employees do not need a collective agreement. Still, the IF Metall contract secretary stated that Linde’s strike against Tesla should make it more difficult for the electric vehicle maker to operate its business in Sweden. 

“It remains to be seen. But as I have said before, it is about many small streams. This stops everything Linde does for Tesla. So not only with them, but regardless of where the work takes place. So if Tesla has problems with a truck, they will not have it repaired or serviced,” Petersson stated.

Following the decision of the Swedish Meditation Institute to end the negotiations between IF Metall and Tesla early last month, the union noted that it would still try to pressure the EV maker to sign a collective agreement. Since then, the Electricians union, as well as the postmen’s unions Seko and ST have continued to initiate blockades against Tesla Sweden.

SpaceX is preparing to launch its final Starship V2 rocket on October 13, 2025. The launch closes the curtain on Starship V2 and marks the start of the ambitious spacecraft’s V3 era. 

Liftoff for Flight 11 is scheduled for 7:15 p.m. ET from Starbase in South Texas, with a 75-minute launch window. The mission will test reentry dynamics, new landing burn configurations, and heat-shield upgrades ahead of the transition to the next-generation Starship V3.

Starship V3 and beyond

Elon Musk confirmed on X that Starship V3 is already in production and could be “built & tested” and perhaps even flown before the end of 2025. The new version is expected to feature major performance and scale improvements, with Musk stating that Starship V3, provided that things go well, might be capable of reaching Mars, though V4 is more likely to perform a full-scale mission to the red planet. 

“Only one more V2 left to launch,” Musk wrote back in August following Starship’s successful Flight 10 mission. In another post, Musk stated that “Starship V3 is a massive upgrade from the current V2 and should be through production and testing by end of year, with heavy flight activity next year.”

Starship V2’s final mission

Flight 11 is designed to push the limits of Starship V2. SpaceX engineers have intentionally removed heat-shield tiles in vulnerable areas to analyze how the vehicle handles atmospheric reentry under stress, as noted in a Space.com report. The test will also refine subsonic guidance algorithms and new landing burn sequences for the Super Heavy booster that would be used for Starship V3.

“Super Heavy will ignite 13 engines at the start of the landing burn and then transition to a new configuration with five engines running for the divert phase. Previously done with three engines, the planned baseline for V3 Super Heavy will use five engines during the section of the burn responsible for fine-tuning the booster’s path, adding additional redundancy for spontaneous engine shutdowns. 

“The booster will then transition to its three center engines for the end of the landing burn, entering a full hover while still above the ocean surface, followed by shutdown and dropping into the Gulf of America,” SpaceX wrote in a post on its official website.