Connect with us

News

BYD aims to start vehicle production at Thailand EV plant in Q3 2024

Credit: BYD

Published

on

NEV maker BYD has announced plans to begin vehicle production at its Thailand plant in the third quarter of 2024. The announcement coincided with the automaker’s participation in the ongoing 45th Bangkok International Motor Show, which is being held from March 27 – April 7, 2024.

During its announcement, BYD highlighted that it is focused on the Thai auto market. The company’s Thailand investment is expected to bring advanced manufacturing technology, industrial development, and a significant number of jobs in the country, as noted in a CNEV Post report. 

BYD showcased its entire brand portfolio — including BYD, Yangwang, Fang Cheng Bao, and Denza — at the 45th Bangkok International Motor Show. This was the first time that all of BYD’s brands were brought together at an automotive show outside of China. 

Among the vehicles that BYD showcased at the 45th Bangkok International Motor Show were the 2024 Atto 3 long-range (known as the Yuan Plus in China), the Song Max EV, the BYD Sealion (known as the Sea Lion 07 in China), BYD Seal U (known as the Song Plus EV in China), the Yangwang U9, and the Bao 5. The company also started pre-sales of the pre-sales for the Denza D9, an MPV.

BYD’s Thai plant held its groundbreaking ceremony in March 2023. The facility is constructed on land acquired from WHA Industrial Development PLC in September 2022. Once complete, the Thai EV factory is expected to have an annual production capacity of 150,000 vehicles. 

Advertisement

BYD is not just establishing its EV production facilities in Thailand. The company is also constructing car factories in Hungary and Brazil. Vehicle production has also started at BYD’s plant in Uzbekistan earlier this year. 

During a recent investors conference, BYD Chairman and President Wang Chuanfu informed investors that the company expects deliveries to hit 3.6 million units this year, which is about 20% more compared to last year’s 3.02 million units. The BYD Chairman also noted that BYD expects to see vehicle exports more than doubling to 500,000 units this 2024.

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Gigafactory Texas builds its half millionth vehicle

The milestone was shared via Twitter/X by the official @Gigafactories account.

Published

on

Credit: Tesla Manufacturing/X

Tesla’s Gigafactory Texas has officially rolled out its 500,000th vehicle, marking a significant achievement in the factory’s history and reinforcing its role as a central hub in Tesla’s vehicle manufacturing network. 

The milestone was shared via Twitter/X by the official @Gigafactories account. “Congratulations to the Giga Texas team for building 500k vehicles,” the company’s X post read.

As could be seen in Tesla Manufacturing’s post, the Gigafactory Texas team celebrated the milestone by posting for a photograph with the facility’s half millionth unit, a white Tesla Model Y. The team held balloons that spelled “500K” on its commemorative photo. 

Giga Texas, located near Austin, has ramped its operations since its launch, producing Tesla’s Cybertruck and Model Y. Crossing the half-million vehicle mark solidifies the facility’s importance to Tesla’s overall operations, especially considering the fact that the Model Y is the company’s best-selling vehicle.

While Giga Texas is just producing the Model Y and the Cybertruck for now, the facility is also poised to produce the Cybercab. The Cybercab is expected to be Tesla’s highest volume vehicle, with Elon Musk estimating that the company would be producing about 2 million units of the autonomous two-seater per year. 

Advertisement

The Cybercab is unlike any vehicle that is currently produced today, and its production would be quite extraordinary. As per Elon Musk’s previous comments, the Cybercab’s manufacturing line would not look like an automotive production line at all. Instead, Musk noted that the Cybercab’s line in Gigafactory Texas would resemble a high-speed consumer electronics line instead.

“We do want to scale up production to new heights obviously with the Cybercab. Cybercab is not just revolutionary car design. It’s also a revolutionary manufacturing process. So I guess we probably don’t talk about that enough, but if you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line,” Musk previously stated.

Continue Reading

News

Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized

Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier.

Published

on

Credit: Tesla

Tesla might have all but finalized the design for its Optimus V3 humanoid robot, at least if rumors from China prove accurate. As per recent reports, Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier, with deliveries expected sometime in the first quarter of 2026.

The volume of orders suggested by the reports from China suggests that the components will not just be used for Optimus prototypes.

The rumor

As noted in a report from Sina News, media outlets across China have recently reported that Tesla has placed a $685 million (5 billion RMB) order for linear actuators from Sanhua Intelligent Controls. The components will reportedly be used for the production of Optimus, which will likely be mass-produced in its V3 iteration. The reports claimed that the delivery of the actuators will likely start sometime in the first quarter of 2026. 

Industry watchers have estimated that such a volume would be enough for about 180,000 Optimus robots. This suggests that while Tesla might not be able to start the initial production of its humanoid robots this year, the electric vehicle maker might be able to hit the ground running with its Optimus production next year. And as hinted at by Elon Musk’s comments on X, Tesla seems to be preparing to produce Optimus V3 en masse.

https://twitter.com/tslaming/status/1978311791890645146

Company comments

The reports of Tesla’s alleged actuator orders have resulted in Sanhua Intelligent Controls’ stock rising. Interestingly enough, a Tesla China representative has stated that “no official information about this order that could be disseminated externally.” A representative from Sanhua, on the other hand, simply stated that the company’s robotics business is progressing smoothly, but they could not comment on market rumors. 

Advertisement

While these reports are rumors for now, there are some optimistic hints that Tesla might have all but finalized the design for Optimus V3, and the company might be looking to start the robot’s production. For one, Sanhua is already a Tesla supplier, providing components for the company’s electric cars. A report from The Information also alleged that Tesla is no longer looking to produce 5,000 Optimus robots in 2025. This was reportedly due to challenges in the robot’s hands.

If Tesla is really starting to order large volumes of components for Optimus’ production, it would suggest that the company might have overcome the challenges it was facing with the humanoid robot earlier this year. It would then not be farfetched if Tesla were able to start the initial production of Optimus V3 next year.

Continue Reading

News

Tesla eyes two new states for Robotaxi

Published

on

Credit: @TerrapinTerpene/X

Tesla has officially shown that it is eyeing two new states for Robotaxi operation in the U.S., as it hopes to add the new areas to its ever-growing list of places where the suite is either active or in the testing phase.

Tesla first launched its Robotaxi suite in Austin, Texas, in late June. It expanded the suite to the San Francisco Bay Area just a month later. Since then, it has not launched any public rides in any other states, but it has gained several approvals for early testing.

Tesla officially launches Robotaxi service with no driver

In preparation for operation in new states, Tesla routinely lists job postings on its Careers website, which helps align potential employees with opportunities ahead of regulatory approvals. This is a strategy that allows Tesla to start operations immediately upon licensing for testing.

Tesla started hiring Vehicle Operators for Autopilot in Arizona and Nevada months before the company gained any sort of approvals from state governments for Robotaxi. However, those approvals eventually came in the form of testing licenses, which allow the company to perform validation ahead of its public launch.

Tesla begins validating Robotaxi in a new area, hinting at expansion

Now, Tesla has posted job listings for Vehicle Operators for Autopilot in two new states: Colorado and Illinois. The Colorado job listing is located in Aurora, a suburb of Denver. Tesla is looking for Robotaxi operators in Chicago as well.

These postings hint toward Tesla’s continuing efforts to expand Robotaxi to new places. Earlier this year, CEO Elon Musk said the company would like to have Robotaxi available to at least half of the U.S. population.

It has expanded significantly since its initial launch in late June, but it is still a far way off from where Tesla would like it to be by year’s end.

So far, Tesla has job listings for Autopilot Vehicle Operators in Arizona, California, Texas, Florida, Colorado, Nevada, and Illinois.

Continue Reading

Trending