News
Tesla Cybercab specs revealed: range, curb weight, range ratings, and more
Tesla’s Cybercab has taken a significant step toward production with new technical details emerging from 2026 EPA certification documents.
The filings, which include a Certificate of Conformity issued in late May, provide the most comprehensive public look yet at the purpose-built autonomous vehicle designed for high-volume, low-cost ride-hailing operations.
At its core, the Cybercab is a front-wheel-drive electric vehicle powered by a single 163 kW (219 horsepower) AC permanent magnet motor. Despite its modest output, prioritizing efficiency and cost over neck-snapping acceleration, the vehicle boasts a strong power-to-weight ratio thanks to its lightweight curb weight of 3,113 pounds and a GVWR of 3,730 pounds.
It operates on a 326-volt electrical architecture with a compact ~48 kWh lithium-ion battery pack. The standout revelation is the vehicle’s exceptional efficiency, which Tesla has routinely flexed in the past.
EPA lab tests list an equivalent all-electric range of 418 miles combined and 375 miles on the highway. Tesla has previously targeted around 300 miles of real-world range, and analysts expect the final EPA-rated figure to land near 280-300 miles after adjustment factors.
At a certified 165 Wh/mi in earlier testing, the Cybercab is reportedly the most efficient EV ever produced, significantly outperforming vehicles like the Lucid Air Pure.
New information about @Tesla‘s Cybercab has been revealed in public EPA documents.
• Front-wheel drive
• Battery capacity: ~48 kWh
• 219 horsepower
• Curb weight: 3,113 lbs
• GVWR: 3,730 lbs
• Motor power: 163kW
• Voltage: 326v-
-Equivalent All Electric Range is listed at… pic.twitter.com/D4gkJJTj25
— Sawyer Merritt (@SawyerMerritt) June 15, 2026
This efficiency stems from deliberate design choices tailored for robotaxi duty. The two-seater features a highly aerodynamic shape, minimal weight, which is aided by structural battery integration of what are likely 4680 cells, and no steering wheel or pedals in its fully autonomous configuration.
For ride-hailing fleets, where average trips are short, and can be just five or ten miles, the smaller battery enables faster charging cycles, lower material costs, and reduced vehicle price, a key to Tesla’s goal of a ~$30,000 production cost.
Implications for Autonomous Mobility
These specs underscore Tesla’s strategy: maximize utilization and minimize operating expenses. A ~48 kWh pack could support dozens of short rides per charge, with energy costs potentially dropping below 20 cents per mile at scale. Front-wheel drive simplifies manufacturing and maintenance compared to dual-motor AWD setups in passenger Teslas.
The 219 hp motor provides ample performance for urban and highway speeds without excess, addressing questions about why such power is needed in a “slow” autonomous vehicle. Quick merges and hill climbing still matter for safety and passenger comfort.
-
Production has already begun at Giga Texas, with EPA certification clearing the path for U.S. deployment. While unsupervised Full Self-Driving remains the critical hurdle, these details paint a compelling picture of a vehicle engineered from the ground up for the robotaxi future: affordable to build, cheap to run, and capable of delivering strong range on a fraction of the battery capacity found in today’s EVs.
As Tesla ramps toward volume output, the Cybercab could reshape urban transportation economics.
On Friday, Tesla launched the Outlet Adapter that enabled Vehicle-to-Load (V2L) energy transfer, meaning owners could essentially utilize their cars as a power source for things like laptops, electric grills, or string lights.
However, even owners of some of the newest builds of the Model Y are finding out that their cars are not compatible with the new $80 accessory, stirring up a new complaint among members of the community.
Tesla launches V2L Outlet Adapter for Premium Model Y in the U.S.
Upon the release of the Outlet Adapter on Friday, I signed into my Tesla account to order the accessory. However, I was met with the dreaded “This product is not compatible with your 2026 Model Y” message at the bottom of the screen.
Some said their accounts also displayed the same message, but they ordered anyway. However, they might be surprised to find that this is no mistake; some of the newest Model Ys do not have the appropriate Power Conversion System (PCS). Mine, which was ordered on this day last year and delivered on August 31, has the old 48A, single-phase PCS.
Vehicles with the new, two-piece PCS are able to utilize V2L features on their cars:
🚨 Looks like you can hit the Parts Catalog and enter your VIN and check to see if your Model Y will be able to use the adapter for V2L.https://t.co/QA9zRk7n2k
h/t to @SawyerMerritt for finding this out.
-I am sad but this isn’t a huge loss. https://t.co/AYpI12QVV9 pic.twitter.com/LRFSrtRywo
— TESLARATI (@Teslarati) August 16, 2026
Obviously, it’s disappointing. Many owners have taken delivery this year and still can not utilize the Outlet Adapter because their cars feature the old PCS:
Took delivery in February of 2026. I have the older one, so not going to work for me pic.twitter.com/RcOVq8gvvT
— Russell (@QuietTesla) August 16, 2026
It looks like if you have one of these older PCS units, you can upgrade, but the parts alone are $1,750, and that’s before Tesla adds labor for installing. It is honestly more logical to get some kind of portable power supply or power station at that point.
-
It is great that Tesla has enabled V2L for Model Y vehicles, but it is also unfortunate that vehicles that are less than one year old are not able to take advantage of this awesome new feature.
With that being said, it truly is a first-world problem; can you really complain when Full Self-Driving is available, maintenance is incredibly inexpensive, and the car has been so good through a year of ownership?
Tesla has launched a new Vehicle-to-Load (V2L) Outlet Adapter for Premium Model Y vehicles in the United States, meaning you can now power devices like laptops or light strings with your vehicle’s battery.
It appears the capability will be available for any Model Y Premium trim, including those that were purchased prior to the Adapter being launched. It will also only impact Juniper Model Y vehicles, so the first-gen owners will unfortunately not have access to this capability.
If your Model Y was purchased before Tesla renamed the trim levels to “Premium” and “Standard,” it does not seem to be compatible. My Model Y is technically a Premium build, as it is the Long Range All-Wheel-Drive. However, Tesla says it is not compatible with my vehicle.
🚨 Tesla has launched the Outlet Adapter for Model Y Premium in the U.S., enabling V2L capability for all Premium trims (that’s what it appears to be as it is available for purchase with all Premium trims)
It’s available for $80. 2.4kW max power and rated for 120v, 20A pic.twitter.com/lDxlVIk5s8
— TESLARATI (@Teslarati) August 14, 2026
For $80, you can now utilize your car as a portable charger for small appliances or devices. This is perfect for things like tailgates, concerts, or camping, as you can now plug in devices that you might use. Those string lights for camping? That laptop for the other games that are on at the tailgate?
-
They’ll both utilize energy from your Tesla’s battery to be powered. This is the first time Tesla has expanded the capability to vehicles outside of the Model Y Performance and Cybertruck. However, this feature has been highly requested by owners for an extended period of time.
Tesla launched the Outlet Adapter in China last year:
Tesla China rolls out Model Y L V2L adapter, and it’s free for early owners
You will need the Mobile Connector to operate the Outlet Adapter: the Outlet Adapter will plug into the main housing of the Mobile Connector, where the appropriate adapter to charge your vehicle will plug in.
It is rated for 120 volts and 20 amps, and has a max power rating of 2.4kW.
You can buy it here from Tesla for $80.
-
Tesla is nearing its long-awaited unveiling of the all-electric Tesla Roadster, a new report from The Information claims, as the company has said several times this year that the event would take place “soon.”
Now, it appears there is movement on Tesla’s end regarding when it will happen.
The report says that Tesla will unveil the Roadster as soon as this month with a SpaceX version that will utilize cold-gas thrusters to help the vehicle float for a short period of time. This is something CEO Elon Musk has talked about with the Roadster for years.
🚨 The Information is reporting this morning that Tesla is ready to unveil the “flying” Roadster as soon as this month
It’s almost here, folks. pic.twitter.com/IdL4atsucQ
— TESLARATI (@Teslarati) August 14, 2026
Additionally, due to the delays, Tesla explored “a variety of designs” for the Roadster, potentially planning to abandon the design it showed off for the first time in 2017 and adopting an entirely new aesthetic.
-
According to The Information, Tesla considered utilizing a repurposed Model S Plaid and even wanted to upgrade the look to something like a Lamborghini Countach.
We’ve heard all of these things before, including teases about the date and how “soon” the Roadster will finally be ready to be shown off to the world (for the second time). Musk said that the event would occur in April, then May, then Chief Designer Franz von Holzhausen continued to say it would be coming “soon.”
We do expect to see the Roadster by the end of the year, and now with this new report swirling, it appears it could be sooner rather than later.
The wait has been incredibly long, but there is likely a good reason for it. Tesla’s desire to make the Roadster the craziest vehicle on the road was non-negotiable, and it likely took a lot of time and resources to develop and perfect into something that was safe and suitable for a vehicle like this.
Tesla V2L adapter for Model Y stirs up a new complaint among owners
Tesla launches V2L Outlet Adapter for Premium Model Y in the U.S.
