News
SpaceX’s recovered fairing spotted sailing into port on Mr Steven
Just 24 hours after gently landing in the ocean, SpaceX recovery technicians have successfully recovered one half of an intact Falcon payload fairing for the first time ever. Photos of the return to Port of San Pedro in Southern California, captured by Teslarati photographer Pauline Acalin, show that the halve recovered is in amazing condition considering its journey from speeds of nearly two miles per second (approximately 30 football fields per second, or more than ten times faster than a commercial passenger jet), to a soft, watery halt.
Despite the fact that SpaceX’s recovery boat, Mr Steven, was unable to catch the fairing as intended, a truly 100% successful recovery using the vessel’s specially-designed net is all but a foregone conclusion. If the fairing can gently land in the ocean looking as good as this article does, avoiding the water entirely should be a relatively simple matter of tweaking recovery hardware and software – a slightly larger parafoil as mentioned by Elon Musk, for example.

Mr Steven proudly returns to port with fairing halve in tow. (Pauline Acalin)
This recovery marks the end of yet another successful flight-proven SpaceX launch, this time tasked with carrying the Spanish PAZ imaging satellite and two SpaceX Starlink prototypes into a sun-synchronous orbit around Earth. We’re just two full months into 2018 and SpaceX appears to already be nearing the end of its fairing recovery development program, with operational fairing recovery and reuse the next (imminent) task at hand.
The most important unknown here is just how well SpaceX’s fairing design is able to cope with even brief contact with or immersion in saltwater, a natural corrosive agent. As a Teslarati reader rightly noted, carbon fiber composites do currently see quite a bit of use in boating, apparently no worse for wear in terms of maintainability. However, carbon fiber components on marine vessels are treated and coated with specially-chosen laminates and waterproofing materials to prevent saltwater intrusion. It’s unclear if SpaceX’s fairings include the same sort of treatment, although it can be all but guaranteed that the outside of the fairing is designed to be perfectly sealed against the environment – a necessity to protect sensitive satellite components from local weather and humidity.
Mr. Steven pulling into port in San Pedro with a beautifully intact fairing. Next attempt at catching the fairing in the ship’s net is about a month away! #spaceX #paz @teslarati #starlink pic.twitter.com/FM2tpowktL
— Pauline Acalin (@w00ki33) February 23, 2018
Of course, reuse for this particular fairing half may be out of the question given its pathfinder position. SpaceX may destructively analyze and test the recovered fairing to gather as much detail as possible about its condition after a rough reentry and some ocean-floating leisure time. In line with my above speculation, recovery technicians and engineers will judge how much (if any) saltwater managed to get inside the fairing, while also judging the condition of the giant halve’s carbon composite structure. Just like SpaceX chose to display its first successfully landed Falcon 9 booster outside of their Hawthorne, CA factory, they may hold onto this intact fairing as a piece of SpaceX history, maybe even put it on display in or around one of SpaceX’s US facilities.
- For the first time, photographers have a chance to photograph a single fairing halve in high detail. (Pauline Acalin)
- Mr Steven is looking as good as ever, despite not being able to flex its new net. (Pauline Acalin)
- Could just be me, but that is one BEAUTIFUL hunk of carbon fiber and aluminum. (Pauline Acalin)
- (Pauline Acalin)
With the next Mr Steven-led fairing recovery set to occur on March 29, SpaceX will have plenty of additional options to firm up their expertise with the newly successful practice. In fact, the upcoming February 25 launch and “hot” landing of Hispasat 30W – this time on the East coast – could also see its own successful fairing recovery, given the fact that PAZ’s fairing technically survived intact without the use of Mr Steven’s gentler catching mitt. Time will tell!
Follow us on social media for down-to-the-minute and behind the scenes updates on SpaceX activities.
Teslarati – Instagram – Twitter
Tom Cross – Twitter
Pauline Acalin – Twitter
Eric Ralph – Twitter
Elon Musk
Tesla Terafab set for launch: Inside the $20B AI chip factory that will reshape the auto industry
Tesla set to launch “Terafab Project: A vertically integrated chip fabrication effort combining logic processing, memory, and advanced packaging.
Tesla is making one of the boldest bets in its history. On March 14, Elon Musk posted on X that the “Terafab Project launches in 7 days,” pointing to March 21, 2026 as the start date for what he has described as a vertically integrated chip fabrication effort combining logic processing, memory, and advanced packaging.
Tesla first confirmed Terafab on its January 28, 2026 earnings call, where Musk told investors the company needs to build a chip fabrication facility to avoid a supply constraint projected to materialize within three to four years. But the seeds were planted even earlier. At Tesla’s annual general meeting last year, Musk warned that even in the best-case scenario for chip production from their suppliers, it still wouldn’t be enough, and declared that building a “gigantic chip fab” simply had to be done.
While there has been no official announcement on where Tesla plans to break ground on the massive Terafab, all signs point to the North Campus of Giga Texas in Austin.
Months of speculation has surrounded Tesla’s North Campus expansion at Giga Texas, where drone footage captured by observer Joe Tegtmeyer revealed massive construction site preparation just north of the existing factory on a scale that rivals the original Giga Texas footprint itself.
Samsung’s Tesla AI5/AI6 chip factory to start key equipment tests in March: report
The project is projected to produce 100–200 billion AI and memory chips annually, targeting 100,000 wafer starts per month, at an estimated cost of $20 billion. Tesla is targeting 2-nanometre process technology and anticipated to be the most advanced node currently in commercial production. Dubbed the Tesla AI5 chip, the chip will pack 40x–50x more compute performance and 9x more memory than AI4, and will be among the first products Terafab factory is set to produce. This highly optimized, and massively powerful inference chip is designed to make full self-driving (FSD) and Tesla’s Optimus robots faster, safer, and with full autonomy.
This is where Terafab becomes a genuine game-changer. If Tesla successfully builds a 2nm chip fab at scale, it becomes one of only a handful of entities that’s capable of producing AI silicon in-house, with competitive implications that extend far beyond Tesla’s own vehicles, and potentially positioning Tesla as a chip supplier or licensor to other industries.

Credit: @serobinsonjr/X
The next-gen Tesla AI chips will power advancements in Full Self-Driving software, the Cybercab Robotaxi program, and the Optimus humanoid robot line. Musk’s projections for Optimus require chip volumes that no existing external supplier can commit to on Tesla’s timeline.Competitors like Waymo and GM’s Cruise remain dependent on third-party silicon, leaving them exposed to the same supply chain vulnerabilities Tesla is now working to eliminate entirely.
The Terafab launch this week may not mean a factory opens its doors overnight, but it signals Tesla is serious about owning the entire AI stack, from software to silicon.
Elon Musk
What is Digital Optimus? The new Tesla and xAI project explained
At its core, Digital Optimus operates through a dual-process architecture inspired by human cognition.
Tesla and xAI announced their groundbreaking joint project, Digital Optimus, also nicknamed “Macrohard” in a humorous jab at Microsoft, earlier this week.
This software-based AI agent is designed to automate complex office workflows by observing and replicating human interactions with computers. As the first major outcome of Tesla’s $2 billion investment in xAI, it represents a powerful fusion of hardware efficiency and advanced reasoning.
At its core, Digital Optimus operates through a dual-process architecture inspired by human cognition.
Macrohard or Digital Optimus is a joint xAI-Tesla project, coming as part of Tesla’s investment agreement with xAI.
Grok is the master conductor/navigator with deep understanding of the world to direct digital Optimus, which is processing and actioning the past 5 secs of…
— Elon Musk (@elonmusk) March 11, 2026
Tesla’s specialized AI acts as “System 1”—the fast, instinctive executor—processing the past five seconds of real-time computer screen video along with keyboard and mouse actions to perform immediate tasks.
xAI’s Grok model serves as “System 2,” the strategic “master conductor” or navigator, providing high-level reasoning, world understanding, and directional oversight, much like an advanced turn-by-turn navigation system.
When combined, the two can create a powerful AI-based assistant that can complete everything from accounting work to HR tasks.
Will Tesla join the fold? Predicting a triple merger with SpaceX and xAI
The system runs primarily on Tesla’s low-cost AI4 inference chip, minimizing expensive Nvidia resources from xAI for competitive, real-time performance.
Elon Musk described it as “the only real-time smart AI system” capable, in principle, of emulating the functions of entire companies, handling everything from accounting and HR to repetitive digital operations.
Timelines point to swift deployment. Announced just days ago, Musk expects Digital Optimus to be ready for user experience within about six months, targeting rollout around September 2026.
It will integrate into all AI4-equipped Tesla vehicles, enabling parked cars to handle office work during downtime. Millions of dedicated units are also planned for deployment at Supercharger stations, tapping into roughly 7 gigawatts of available power.
Oh and it works in all AI4-equipped cars, so your car can do office work for you when not driving.
We’re also deploying millions of dedicated Digital Optimus units in the field at Superchargers where we have ~7 gigawatts of available power.
— Elon Musk (@elonmusk) March 12, 2026
Digital Optimus directly supports Tesla’s broader autonomy strategy. It leverages the same end-to-end neural networks, computer vision, and real-time decision-making tech that power Full Self-Driving (FSD) software and the physical Optimus humanoid robot.
By repurposing idle vehicle compute and extending AI4 hardware beyond driving, the project scales Tesla’s autonomy ecosystem from roads to digital workspaces.
As a virtual counterpart to physical Optimus, it divides labor: software agents manage screen-based tasks while humanoid robots tackle physical ones, accelerating Tesla’s vision of general-purpose AI for productivity, Robotaxi fleets, and beyond.
In essence, Digital Optimus bridges Tesla’s vehicle and robotics autonomy with enterprise-scale AI, promising massive efficiency gains. No other company currently matches its real-time capabilities on such accessible hardware.
It really could be one of the most crucial developments Tesla and xAI begin to integrate, as it could revolutionize how people work and travel.
News
Tesla adds awesome new driving feature to Model Y
Tesla is rolling out a new “Comfort Braking” feature with Software Update 2026.8. The feature is exclusive to the new Model Y, and is currently unavailable for any other vehicle in the Tesla lineup.
Tesla is adding an awesome new driving feature to Model Y vehicles, effective on Juniper-updated models considered model year 2026 or newer.
Tesla is rolling out a new “Comfort Braking” feature with Software Update 2026.8. The feature is exclusive to the new Model Y, and is currently unavailable for any other vehicle in the Tesla lineup.
Tesla writes in the release notes for the feature:
“Your Tesla now provides a smoother feel as you come to a complete stop during routine braking.”
🚨 Tesla has added a new “Comfort Braking” update with 2026.8
“Your Tesla provides a smoother feel as you come to a complete stop during routine braking.” https://t.co/afqCpBSVeA pic.twitter.com/C6MRmzfzls
— TESLARATI (@Teslarati) March 13, 2026
Interestingly, we’re not too sure what catalyzed Tesla to try to improve braking smoothness, because it hasn’t seemed overly abrupt or rough from my perspective. Although the brake pedal in my Model Y is rarely used due to Regenerative Braking, it seems Tesla wanted to try to make the ride comfort even smoother for owners.
There is always room for improvement, though, and it seems that there is a way to make braking smoother for passengers while the vehicle is coming to a stop.
This is far from the first time Tesla has attempted to improve its ride comfort through Over-the-Air updates, as it has rolled out updates to improve regenerative braking performance, handling while using Full Self-Driving, improvements to Steer-by-Wire to Cybertruck, and even recent releases that have combatted Active Road Noise.
Tesla holds a unique ability to change the functionality of its vehicles through software updates, which have come in handy for many things, including remedying certain recalls and shipping new features to the Full Self-Driving suite.
Tesla seems to have the most seamless OTA processes, as many automakers have the ability to ship improvements through a simple software update.
We’re really excited to test the update, so when we get an opportunity to try out Comfort Braking when it makes it to our Model Y.




