News
Elon Musk spoke with Consumer Reports following Tesla Model 3 test results
In a recent episode of Consumer Reports’ Talking Cars, Auto Test Director Jake Fisher recounted a conversation he had with Tesla CEO Elon Musk following the release of CR’s test results for the Model 3.
While the magazine stated that there was “plenty to like” about the electric car, such as its excellent range and handling, there were several aspects of the vehicle that left much to be desired. The most prominent of the Model 3’s shortcomings were the car’s brakes, which had an average stopping distance of 152 feet from 60-0 mph — longer than any vehicle in its class. Due to its shortcomings, Consumer Reports opted not to give the Model 3 a “Recommended” rating.
Musk promptly responded to the magazine’s findings on Twitter, stating that Tesla would address the Model 3’s braking issues in an over-the-air firmware update. Musk also pledged to continuously improve the Model 3’s brakes, saying that “Tesla won’t stop until Model 3 has better braking than any remotely comparable car.”
As revealed in Consumer Reports’ recent Talking Cars episode, Musk also reached out to Auto Test Director Jake Fisher after the magazine’s test results were published. During their conversation, Musk and Fisher discussed the Model 3 and possible improvements to the vehicle.
“He was remarkably candid about things. Honestly, he actually thanked us for bringing these things to attention, and said that we’re helping him make the car better,” Fisher said.
Fisher noted that he and Musk talked about several of the Model 3’s deficiencies, such as its controls, brakes, wind noise, rear seats, and its suspension. According to the CR Auto Test Director, Musk stated that Tesla has implemented improvements to the Model 3’s design over the past few months.
During the March-April timeframe, for one, Tesla rolled out changes to the Model 3’s glass to adjust wind noise in the cabin. Around the same time, Tesla also made modifications to the suspension, such as its shock absorbers, to make the ride more comfortable.
Musk discussed the controls of the Model 3 as well, a particular aspect of the vehicle that was considered as a weakness in Consumer Reports’ evaluation. According to Fisher, Musk threw out some ideas to make the car’s controls better.
“We talked about the vents, and he talked about ideas of, well, maybe as you move the seat, (the Model 3) would automatically adjust the vents and the mirrors to suit you,” Fisher said.
Consumer Reports recently published the results of its tests for the Model 3. [Credit: Consumer Reports/YouTube]
Musk also discussed another one of Consumer Reports’ complaints about the Model 3 — the car’s keycard. During its testing, the magazine noted that the phone key worked very well with the Model 3, but using the keycard proved cumbersome. Musk addressed this issue during his phone conversation with Fisher as well.
“He (Musk) admitted that yeah, this isn’t working too well, and we really should do something better. Again, I don’t know if they’re gonna do it or not, but he said we really need to provide a normal key to the customers of this car,” Fisher said.
The Model 3’s keycard stands as one of its differences with its larger siblings, the Model S and the Model X, both of which use Tesla’s ubiquitous electric car-shaped key fobs. The keycard, which is credit card-sized for easy storing in a wallet, is embedded with a small chip that acts as a digital signature for the vehicle.
Since the Model 3 keycard uses near field communication (NFC) technology, the card has a limited transmission range of about 4 inches, requiring owners to tap the electric car’s B-pillar to unlock the door. The card is also placed between the front seats of the vehicle to start the car.
Consumer Reports has been mixed with Tesla’s vehicles so far. The magazine dubbed the Model S as the best car it ever tested. The Model X, on the other hand, was dubbed by CR “fast and flawed,” citing the overcomplicated Falcon Wing Doors of the all-electric luxury SUV. Despite its reservations with the Model X, however, Consumer Reports nevertheless ranked Tesla as the sole American automaker in its Top 10 list for 2018.
Watch Consumer Reports’ recent episode on the Tesla Model 3 in the video below.
News
Tesla hints at Starlink integration with recent patent
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
Tesla hinted at a potential Starlink internet terminal integration within its vehicles in a recent patent, which describes a vehicle roof assembly with integrated radio frequency (RF) transparency.
The patent, which is Pub. No U.S. 2025/0368267 describes a new vehicle roof that is made of RF-transparent polymer materials, allowing and “facilitating clear communication with external devices and satellites.”
Tesla believes that a new vehicle roof design, comprised of different materials than the standard metallic or glass elements used in cars today, would allow the company to integrate modern vehicular technologies, “particularly those requiring radio frequency transmission and reception.
Tesla has recently filed a US patent application on integrating RF transparent materials into the roof structure.
“facilitating clear communication with external devices and satellites”
Tesla fleet is getting @Starlink connectivity integration soon. LFG @Tesla @elonmusk… pic.twitter.com/bLa8YtPLd1
— Chansoo Byeon (@Chansoo) December 9, 2025
Instead of glass or metallic materials, Tesla says vehicles may benefit from high-strength polymer blends, such as Polycarbonate, Acrylonitrile Butadiene Styrene, or Acrylonitrile Styrene Acrylate.
These materials still provide ideal strength metrics for crashworthiness, stiffness for noise, vibration, and harshness control, and are compliant with head impact regulations.
They would also enable better performance with modern technologies, like internet terminals, which need an uninterrupted signal to satellites for maximum reception. Tesla writes in the patent:
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
One of the challenges Tesla seems to be aware of with this type of roof design is the fact that it will still have to enable safety and keep that at the forefront of the design. As you can see in the illustration above, Tesla plans to use four layers to increase safety and rigidity, while also combating noise and vibration.
It notes in the patent that disclosed examples still meet the safety requirements outlined in the Federal Motor Vehicle Safety Standards (FMVSS).
Starlink integrated directly into Tesla vehicles would be a considerable advantage for owners. It would come with a handful of distinct advantages.
Initially, the inclusion of Starlink would completely eliminate cellular dead zones, something that is an issue, especially in rural areas. Starlink would provide connectivity in these remote regions and would ensure uninterrupted service during road trips and off-grid adventures.
It could also be a critical addition for Robotaxi, as it is crucial to have solid and reliable connectivity for remote monitoring and fleet management.
Starlink’s growing constellation, thanks to SpaceX’s routine and frequent launch schedule, will provide secure, stable, and reliable internet connectivity for Tesla vehicles.
Although many owners have already mounted Starlink Mini dishes under their glass roofs for a similar experience, it may be integrated directly into Teslas in the coming years, either as an upgrade or a standard feature.
News
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla has surprised some owners by sneaking in a new Full Self-Driving version with the wide release of the Holiday Update, which started rolling out to Hardware 4 owners on Friday night.
Tesla has issued a controlled and very slow release pattern with the Holiday Update, which rolls out with Software Version 2025.44.25.5.
For the past two weeks, as it has rolled out to Hardware 3 and older Tesla owners, the company has kept its deployment of the new Software Version relatively controlled.
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla Full Self-Driving v14.2.1.25 made its first appearance last night to Hardware 4 owners who are members of the Early Access Program (EAP). It appears to be a slight refinement from FSD v14.2.1, which has been out for a couple of weeks.
Tesla v2025.44.25.5 Holiday update incoming
Also Full Self-Driving v14.2.1.25!!! pic.twitter.com/74D7S0UGXz
— TESLARATI (@Teslarati) December 13, 2025
Many owners welcome the new FSD version, us included, because we’ve been less than impressed with v14.2.1. We have experienced some minor regressions with v14.2.1, especially with Speed Limit recognition, Speed Profile tinkering, and parking performance.
As it stands, Full Self-Driving is still particularly impressive, but Tesla is evidently having an issue with some of the adjustments, as it is still refining some of the performance aspects of the suite. This is expected and normal with some updates, as not all of them are an improvement in all areas; we routinely see some things backtrack every once in a while.
This new FSD version is likely to take care of those things, but it also includes all of the awesome Holiday Update features, which include:
- Grok with Navigation Commands (Beta) – Grok will now add and edit destinations.
- Tesla Photobooth – Take pictures inside your car using the cabin-facing camera
- Dog Mode Live Activity – Check on your four-legged friend on your phone through periodic snapshots taken of the cabin
- Dashcam Viewer Update – Includes new metrics, like steering wheel angle, speed, and more
- Santa Mode – New graphics, trees, and a lock chime
- Light Show Update – Addition of Jingle Rush light show
- Custom Wraps and License Plates – Colorizer now allows you to customize your vehicle even further, with custom patterns, license plates, and tint
- Navigation Improvements – Easier layout and setup
- Supercharger Site Map – Starting at 18 pilot locations, a 3D view of the Supercharger you’re visiting will be available
- Automatic Carpool Lane Routing – Navigation will utilize carpool lanes if enabled
- Phone Left Behind Chime – Your car will now tell you if you left a phone inside
- Charge Limit Per Location – Set a charge limit for each location
- ISS Docking Simulator – New game
- Additional Improvements – Turn off wireless charging pad, Spotify improvements, Rainbow Rave Cave, Lock Sound TRON addition
Tesla also added two other things that were undocumented, like Charging Passport and information on USB drive storage to help with Dashcam.
Tesla is updating Cybertruck owners on its timeline of a massive feature that has yet to ship: Powershare with Powerwall.
Powershare is a bidirectional charging feature exclusive to Cybertruck, which allows the vehicle’s battery to act as a portable power source for homes, appliances, tools, other EVs, and more. It was announced in late 2023 as part of Tesla’s push into vehicle-to-everything energy sharing, and acting as a giant portable charger is the main advantage, as it can provide backup power during outages.
Cybertruck’s Powershare system supports both vehicle-to-load (V2L) and vehicle-to-home (V2H), making it flexible and well-rounded for a variety of applications.
However, even though the feature was promised with Cybertruck, it has yet to be shipped to vehicles. Tesla communicated with owners through email recently regarding Powershare with Powerwall, which essentially has the pickup act as an extended battery.
Powerwall discharge would be prioritized before tapping into the truck’s larger pack.
However, Tesla is still working on getting the feature out to owners, an email said:
“We’re writing to let you know that the Powershare with Powerwall feature is still in development and is now scheduled for release in mid-2026.
This new release date gives us additional time to design and test this feature, ensuring its ability to communicate and optimize energy sharing between your vehicle and many configurations and generations of Powerwall. We are also using this time to develop additional Powershare features that will help us continue to accelerate the world’s transition to sustainable energy.”
Owners have expressed some real disappointment in Tesla’s continuous delays in releasing the feature, as it was expected to be released by late 2024, but now has been pushed back several times to mid-2026, according to the email.
Foundation Series Cybertruck buyers paid extra, expecting the feature to be rolled out with their vehicle upon pickup.
Cybertruck’s Lead Engineer, Wes Morrill, even commented on the holdup:
As a Cybertruck owner who also has Powerwall, I empathize with the disappointed comments.
To their credit, the team has delivered powershare functionality to Cybertruck customers who otherwise have no backup with development of the powershare gateway. As well as those with solar…
— Wes (@wmorrill3) December 12, 2025
He said that “it turned out to be much harder than anticipated to make powershare work seamlessly with existing Powerwalls through existing wall connectors. Two grid-forming devices need to negotiate who will form and who will follow, depending on the state of charge of each, and they need to do this without a network and through multiple generations of hardware, and test and validate this process through rigorous certifications to ensure grid safety.”
It’s nice to see the transparency, but it is justified for some Cybertruck owners to feel like they’ve been bait-and-switched.
Tesla hints at Starlink integration with recent patent
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
