

News
SpaceX tests Falcon 9 Block 5’s landing leg retraction and preps for first reuse
In the two months since SpaceX first debuted its Falcon 9 Block 5 rocket upgrade with a successful May 2018 launch and landing, the company has forged ahead with final Block 4 or older launch and two additional launches and recoveries of brand new Block 5 boosters, growing the fleet of flight-proven and thus flight-worthy rocket boosters to three.
Given the dramatic changes implemented in Block 5 and the pathfinder nature of these new boosters, SpaceX has spent much of the following time conducting tests and extensive analyses to verify new designs and new technology, ranging from teardowns to tests of specific components like landing legs on a recently-recovered East Coast booster.
Most prominently on that to-do list was a deep-dive teardown of inaugural Block 5 booster B1046, which was apparently completed within the last week or so – as evidenced by the sooty booster’s appearance at SpaceX’s Cape Canaveral Launch Complex 40 (LC-40) around July 24th. The purpose of that teardown was to give most of Falcon 9’s many thousands of individual and critical components a thorough examination, particularly those parts most impacted and worn by launch, reentry, and landing. That most likely includes B1046’s black octaweb and interstage thermal protection, its nine upgraded Merlin 1D engines, the “dance floor” heatshield at the rocket’s base, and landing legs, among myriad other smaller aspects.
More recently (July 27 and 28), SpaceX technicians attempted and completed the first retraction of a Block 5 booster landing leg (B1047 in Port Canaveral, Florida), compared with the current practice of removing both the landing legs and booms before rotating the recovered rocket horizontal and transporting it to a nearby refurbishment facility. Briefly discussed by CEO Elon Musk, Block 5 includes a number of landing leg optimizations, intended to improve robustness, increase reliability, and significantly ease reuse.
“So essentially deploying the landing gear and stowing the landing gear is now a very easy thing to do [on Block 5 boosters], whereas previously it required several hours to re-stow the landing gear. Which can now be done with an actuator, pretty easily.”
Given the fact that it took a full day to prepare for the retraction of the first leg and that the task appears to be accomplished with a fairly complex and manual lifting mechanism requiring several workers to function, it’s possible that the retraction and leg hardware described by Musk is still undergoing some form of testing or production optimization before being added to flight hardware. Nevertheless, photographer and journalist Ken Kremer observed the retraction sequence from start to finish (movement-wise) and pegged it at around 40 minutes total to go from fully deployed to fully stowed.
4 shot sequence:1st time ever #Falcon9 landing leg retracted from recovered @SpaceX 1ststage booster-using cables & pulleys pulling left leg from cap apparatus on top, flush to side, techs assist.took 40min 7/27. #Block5 #Telstar19V launch.Cred:@ken_kremer https://t.co/G4fyocB13Q pic.twitter.com/RPbgT8LdKf
— Ken Kremer🇺🇦🇩🇪🇺🇸🚀🧪 (@ken_kremer) July 27, 2018
In all fairness, truly rapid and near-automatic leg retraction would only be of value to SpaceX once the company needs to refly Falcon 9 with less than a week or two between launches, at which point spending a day or two carefully removing or stowing landing legs outweighs the cost of adding highly specific hardware useless during flight (and thus stealing mass that could otherwise be fuel for a gentler booster recovery or a higher payload orbit).
Keeping as much of that leg retraction hardware on the ground as possible thus makes a lot of sense in today’s launch industry, where SpaceX simply has no material need for near-automatic, internally-actuated leg retraction on Falcon 9 (only necessary for extremely rapid turnaround). Still, if the company hopes to achieve Musk’s 24-hour booster turnaround challenge by the end of 2019, SpaceX technicians and engineers will need to have a solution in place to retract Falcon 9’s landing legs as quickly as practically possible – every minute will count for such a rapid reuse.
For prompt updates, on-the-ground perspectives, and unique glimpses of SpaceX’s rocket recovery fleet (including fairing catcher Mr Steven) check out our brand new LaunchPad and LandingZone newsletters!
News
Tesla just had its best wholesale month this year in China
Tesla China’s wholesale figures include both vehicles that are sold domestically and exported abroad.

Tesla China just had its best wholesale month this 2025 so far. In August, the electric vehicle maker sold 83,192 vehicles wholesale, a 22.55% increase compared to July 2025’s 67,886 units.
Tesla China’s wholesale figures are still down year-over-year, but the company’s momentum seems notable, especially with the arrival of the Model Y L.
August 2025 figures
As noted in a CNEV Post report, August 2025’s 83,192 wholesale figures are 4.04% less than the 86,697 units that were sold in the same period last year. It is, however, a 22.55% improvement from the previous month. From January to August, Tesla China sold 515,552 units wholesale, a 12.24% year-over-year decrease.
It should be noted that Tesla China’s wholesale figures include both vehicles that are sold domestically and exported abroad. With this in mind, August’s results bode well for Tesla China, as it suggests that Gigafactory Shanghai is now hitting its pace with both its domestic deliveries and its exports. Giga Shanghai serves as Tesla’s primary vehicle export hub.
Model Y L factor
Tesla had a challenging first quarter this year, thanks in part to the changeover to the Model Y across the Fremont factory, Giga Texas, Giga Shanghai, and Giga Berlin-Brandenburg. This changeover resulted in low sales in the first quarter. Political controversies surrounding Elon Musk and violence against Tesla stores and vehicles in the first and second quarters in the United States and Europe did not help much either.
This Q3, however, Tesla seems to be hitting its stride, especially in China. The launch of the new Model Y L has allowed Tesla to compete in the six-seat, large SUV segment, a market that was previously closed to the standard Model Y. Reports have suggested that Tesla China has been seeing a lot of demand for the Model Y L, which should help the company achieve higher sales this quarter and the remaining months of the year.
News
Tesla Model Y L sales have been incredible since launch: report
Tesla China’s sales this third quarter could see a notable improvement.

A recent report from China has suggested that the Tesla Model Y L has been seeing an impressive volume of orders since it was launched last month.
Amidst the Model Y L’s rollout, Tesla China’s sales this third quarter could see a notable improvement.
Model Y L orders
Citing information from a salesperson from a Tesla store in Beijing, media outlet Cailianshe stated that the Model Y L has been resonating well with consumers, particularly bigger families that need more space for their children. The salesperson stated that since the vehicle’s unveiling in China, the Model Y L has garnered 120,000 orders, and almost 10,000 new orders daily.
“(The Model Y L) is selling very well. Since its launch, 120,000 orders have been received, with nearly 10,000 orders placed every day. The first batch of customers began receiving deliveries in the past two days,” the Tesla representative noted.
More momentum
China is the world’s largest electric vehicle market, and it is also the most unforgiving and competitive. While the standard Model Y consistently performed well in the premium crossover SUV segment, it was high time for Tesla China to offer a larger vehicle for domestic consumers. There are quite a lot of customers, after all, who need more space than what the standard Model Y could offer.
The Model Y L’s spacious interior seems to be well appreciated by consumers, with the Tesla Beijing salesperson noting that the vehicle’s excellent rear seats have been a notable selling point. “Although the Model YL is a bit more expensive, it has more space and a more flexible rear seat, making it perfect for families with children,” the representative added.
News
Tesla adjusts Robotaxi safety monitor strategy in Austin with new service area
The positioning of the driver, as well as the driver’s hands being closer to the steering wheel, is more similar to what Tesla is doing in the Bay Area Robotaxi program than it is to what it has done in Austin.

Tesla has adjusted its Robotaxi safety monitor strategy in Austin after it expanded its service area in the city last week for the third time.
Tesla has been operating its Robotaxi platform in Austin since June 22. The vehicles have been operated without a driver, but Tesla has placed safety monitors in the passenger’s seat as a precaution.
The safety monitors are responsible for performing any necessary interventions and maintaining a safe and comfortable cabin for riders as they experience Tesla’s first venture into the driverless ride-sharing space.
Last week, Tesla expanded its service area in Austin for the third time, expanding it from about 90 square miles to 170 square miles. The expansion included new territory, including the Austin-Bergstrom International Airport, Tesla’s Gigafactory Texas, and several freeways.
Tesla Robotaxi geofence expansion enters Plaid Mode and includes a surprise
The freeway is an area that is uncharted territory for the Tesla Robotaxi program, and this fact alone encouraged Tesla to switch up its safety monitor positioning for the time being.
For now, they will be riding in the driver’s seat when routes require freeway travel:
Sept 1 in Austin and our Robotaxi arrived with Tesla safety driver in the driver seat, similar to the Bay area (no logo on the car). Here’s that first moment when I realized, our autonomous car was heading onto the freeway. pic.twitter.com/1QfyN2Ubzf
— Gail 🇺🇸 (@gailalfaratx) September 2, 2025
The positioning of the driver, as well as the driver’s hands being closer to the steering wheel, is more similar to what Tesla is doing in the Bay Area Robotaxi program than it is to what it has done in Austin.
This is sure to draw criticism from skeptics, but it is simply a step to keep things controlled and safe while the first Robotaxi drives take passengers on the highway with this version of the Full Self-Driving software.
This FSD version differs from the one that customers have in their own vehicles, but CEO Elon Musk has indicated something big is coming soon. FSD v14 is coming to vehicles in the near future, and Musk has said its performance is pretty incredible.
Tesla’s Elon Musk shares optimistic teaser about FSD V14: “Feels sentient”
-
News4 days ago
Tesla is overhauling its Full Self-Driving subscription for easier access
-
Elon Musk5 days ago
Elon Musk shares unbelievable Starship Flight 10 landing feat
-
Elon Musk6 days ago
Elon Musk reveals when SpaceX will perform first-ever Starship catch
-
Elon Musk7 days ago
SpaceX Starship Flight 10 was so successful, it’s breaking the anti-Musk narrative
-
News2 days ago
Tesla appears to be mulling a Cyber SUV design
-
News5 days ago
Tesla expands crazy new lease deal for insane savings on used inventory
-
News5 days ago
Tesla talks Semi ramp, Optimus, Robotaxi rollout, FSD with Wall Street firm
-
News6 days ago
Tesla launches Full Self-Driving in a new region