News
NYC subway closure canceled, Elon Musk’s Boring Company tapped for ideas to improve other systems
The Governor of New York State, Andrew Cuomo, announced on Thursday evening that the current plan to shut down the 225,000 commuter-strong L-train tunnel in the New York City public transportation system for a 15-month-long repair process will no longer be necessary due to a plan implementing new reconstruction techniques. After consulting with a panel of expert engineers from Columbia and Cornell Universities, a new design was proposed to be used in the tunnel which would streamline the repair process and require closures during nights and weekends with partial train tunnel service still available. When asked in a conference call Friday whether other innovators such as Elon Musk of Tesla and The Boring Company were consulted, the governor said Musk had not advised on this specific issue, but was consulted on improvements to the subway’s signaling system. The Metropolitan Transport Authority (MTA), New York’s transportation network, accepted the Governor’s panel recommendations following the announcement.
The L train tunnel under the East River connecting Brooklyn and Manhattan in New York, known as the Canarsie Tunnel, was damaged during Hurricane Sandy, the Category 3 major hurricane which affected the entire eastern seaboard of the United States in 2012. Its storm surge hit NYC on October 29, flooding huge portions of the island, including 9 of the 14 underwater tunnels in the city’s transport system. Of these, 6 have already been repaired. According to the MTA, the damage to the Canarsie Tunnel is comparable to tunnel damage experienced on 9/11, underlining the extent of the repairs needed and the reason behind the original required shutdown.
- Governor Andrew Cuomo with engineering consultants surveying the Canarsie Tunnel. | Credit: New York State Governor’s Office
- Governor Andrew Cuomo with engineering consultants surveying the Canarsie Tunnel. | Credit: New York State Governor’s Office
- A graphic representation of the duct banks damaged in the Canarsie Tunnel during Hurricane Sandy. | Credit: MTA
Saltwater flooding in from the East River during Sandy significantly damaged the infrastructure of the 7,100-foot-long tunnel, including tracks, signals, switches, cables, and lighting. The flood waters additionally filled protected cable tube pathways called “duct banks” throughout the tunnel, and once dry, the silt hardened to a cement-like consistency inside them, making it impossible to rip out and restore the damaged components. Canarsie Tunnel also opened in 1924, adding age to the brewing number of problems being amplified by the lingering effects of corrosive saltwater remnants from Sandy.
In 2016, residents were informed the tunnel was possibly going to be shut down for 15 months to address the extensive repairs, causing significant commute challenges for the approximately 225,000 riders depending on the service. The date for service closure was scheduled to begin April 27, 2019, but the impending deadline motivated Governor Cuomo to seek out alternative solutions. “I can’t tell you the number of people in Brooklyn who have looked me right in the eye and said, ‘Are you sure that there is nothing else that can be done and there’s no way you can possibly shorten this?’,” Cuomo stated in a recent press conference announcing the new subway repair plan.
- Damage sustained by the Canarsie Tunnel during Hurricane Sandy. | Credit: MTA
- Damage sustained by the Canarsie Tunnel during Hurricane Sandy. | Credit: MTA
- Damage sustained by the Canarsie Tunnel during Hurricane Sandy. | Credit: MTA
The repair announcement was the end result of a review process Governor Cuomo began on December 14, 2018, wherein he and a consulting team walked through the damaged tunnel to assess the repairs needed first hand. While the plan will take longer than the original project’s timeline – 20 months instead of 15 – the ability to remain open during the repairs is a welcome relief for city residents. The technology that will enable the tunnel to remain open includes wire wrapping along with ultrasound and laser measurement (LIDAR) tools to assess and monitor damage. Engineers from Cornell University’s College of Engineering and Columbia University’s Fu Foundation School of Engineering and Applied Science with expertise in the type of construction involved were the primary sources for the solutions chosen.
Similar to the innovations that came from Musk’s Boring Company tunneling project, the governor has hopes that the unique system planned for the Canarsie Tunnel will inspire other similar repair projects. “This could be a national model because it is a totally different way to reconstruct a tunnel,” Governor Cuomo touted at the press conference. Also, according to the governor, the techniques in the new plan have been implemented in projects in Europe before for bridge repair, but not in tunnel reconstruction. He hopes to bring more out-of-the-box innovations to the city’s transportation as well. In reference to Elon Musk’s companies, he said, “I don’t believe a time where they’re talking about flying cars and you can get into a car and drive 100 miles on the LIE and never touch the steering wheel, that there’s not a better technology that can regulate the trains!”
For more about the announcement and repair plan, watch Governor Cuomo’s press conference below:
News
Elon Musk hints at Tesla Cybercab’s next market
After launching in Austin, Texas, last week, Tesla is looking to expand the Cybercab to new parts of the United States in an effort that will see the driverless, steering wheel-less, and pedal-less vehicle chauffeur people around as part of the Robotaxi ride-hailing service.
However, the expansion will go far beyond the United States, and CEO Elon Musk revealed he hopes Europe will be the next market where Cybercab will be operational.
Musk has publicly expressed hope that Tesla’s Cybercab robotaxi will reach Europe in the near future.
On September 8, Tesla’s Chief Executive quoted a German rider who had just completed a trip in Austin, Texas, and wrote that he hoped the vehicle would not take years to arrive in Germany. Musk replied with a short but notable message: “Hopefully soon in Europe too.”
Hopefully soon in Europe too https://t.co/vqQ69bLJuN
— Elon Musk (@elonmusk) September 8, 2026
The comment arrived only days after Tesla opened Cybercab ride-hailing to the public in Austin. The two-seat vehicle has no steering wheel or pedals and relies entirely on Tesla’s Full Self-Driving software. Early passengers have described the rides as quiet, smooth, and more stylish than competing robotaxis such as Waymo.
Austin is currently the only city where members of the public can hail a Cybercab through Tesla’s Robotaxi app. The initial fleet is small; Texas registration records show only a few dozen of the purpose-built vehicles on the road.
Tesla set to open Cybercab rides to the public, with no steering wheel or pedals
Tesla has also been operating a larger number of conventional Model Y robotaxis in the same area, but the Cybercab itself represents the company’s first dedicated, controls-free taxi design.
Europe presents a different regulatory picture. The European Union does not permit manufacturers to self-certify vehicles the way Tesla did in the United States.
Type-approval rules and a small-series limit of 1,500 automated vehicles per type per year apply across the bloc.
Supervised Full Self-Driving has gained provisional approval in several member states through national recognition of Dutch certification, yet unsupervised robotaxi operation remains a separate and more distant step. Tesla has not announced a European launch city, date, or approval pathway for the Cybercab.
Musk himself has previously cautioned that the company does not control European regulators. In an earnings call earlier in 2026, he noted that even supervised FSD took an “immense amount of time” to clear and that unsupervised service would be “somewhat at the mercy of the governments in Europe and the EU.”
The latest social-media remark therefore functions more as an expression of intent than a timetable.
If the Cybercab eventually reaches European streets, it would mark a significant expansion of Tesla’s robotaxi ambitions beyond the United States. For now, the vehicle remains an Austin-only experience, and the gap between Musk’s hope and actual deployment will be decided by regulators rather than by engineering alone.
News
Tesla Cybercab improvements are already on the minds of company engineers
Tesla Cybercab might have just rolled out to the public as it entered the company’s Robotaxi suite in Austin this past week. However, the vehicle might already be on its way to becoming even better, as the company is asking riders to describe what they’d like to see improved with the Cybercab.
Tesla sent a rider experience survey to Cybercab passengers only days after paid rides began in Austin. The questionnaire asks how satisfied riders were with the overall trip. Then it requests star ratings for availability and wait time, door functionality, vehicle touchscreen, mobile app experience, seat comfort, interior space, ride comfort, cleanliness, and cargo space.
A later section asks which features riders would most like to have and allows selection of up to three items from a list that includes heated seats, ventilated seats, fully reclining seats, a tray table, a wireless phone charger, a better sound system, and more storage. Respondents may also choose none of these or write in another idea. The survey closes with a recommendation score from zero to ten.
Tesla just sent out a Cybercab rider experience survey so you can give feedback to the team. pic.twitter.com/YsU5OYdAjW
— Sawyer Merritt (@SawyerMerritt) September 8, 2026
This rapid request for input illustrates Tesla’s habit of treating early users as collaborators rather than mere customers. The company has long refined vehicles through software updates and hardware changes informed by real-world use across its passenger cars.
Collecting structured opinions so soon after commercial service started shows the same mindset applied to a purpose-built autonomous taxi. The questions themselves reveal an openness to cabin changes even after the first vehicles reached public streets, which is no surprise.
Tesla has always hoped to cater a great experience to anyone in its vehicles, which is why so many fan-requested features have made it into its vehicles.
Replies already circulating online favor reclining seats, tray tables, wireless charging, improved audio, and extra room when seats fold back.
Tesla Cybercabs narrowly miss deadly Amazon cargo plane crash
Those preferences point toward comfort upgrades that Tesla can implement in later production batches or through cabin revisions. Because the Cybercab is designed around software first principles, many requested amenities can arrive faster than in traditional automakers.
Tesla’s willingness to survey riders immediately after launch therefore makes near-term cabin and experience improvements likely as the team reviews responses and iterates toward a more refined robotaxi people will choose daily.
Cybertruck
Tesla Cybertruck engineer reveals new changes in ‘constantly evolving’ pickup
Tesla Cybertruck Lead Engineer Wes Morrill revealed the company has made several changes to the all-electric pickup, which he calls a “living thing, constantly evolving and improving.”
Cybertruck is manufactured at Tesla’s Gigafactory Texas just outside of Austin, and over the past few years, Tesla has continued to make small changes to the pickup to improve everything from cost, reliability, serviceablility, and manufacturability.
“The finish line isn’t getting to production. A product is a living thing, constantly evolving and improving,” Morrill added.
RELATED:
Tesla Cybertruck AWD is a steal at $60k, is it still at $75k? Full Review
Some of those changes are yet to be revealed, but perhaps the most notable one was the change Tesla made to the aero shield that sits underneath the truck. In the past, it was aluminum, but now the Cybertruck is using a self-reinforcing polypropylene.
Morrill said that the polypropylene is “stretched into fibers and then laminated into the form,” and is much more durable, much lighter, and significantly cheaper than aluminum when it is manufactured this way.
It also enabled some improvements in the geometry of the Cybertruck, improving the manufacturing around the bolts and edges, in addition to minor form changes. These all benefitted the Cybertruck in more ways than one: specifically with durability and improved drag.
I was surprised by how interested people were to find out we made a relatively benign change to the Cybertruck aero shield, a part of the car most people never even see. So I’ll share some more details.
Here are two photos, the left is one of the latest trucks off the… pic.twitter.com/F5cZo2CZKf
— Wes (@wmorrill3) September 7, 2026
Typically, Teslas are not necessarily identified by model year because these changes are fluid and occur when the company sees fit to implement them. It is not like other automotive companies, which usually make sweeping manufacturing changes when building a new model year.
Instead, Teslas are recognized by their “generation” or “era.” For example, those with a newer Model Y might refer to their car as a “Juniper.” This is the same with Model 3, as many refer to the new body style as the “Highland.”
Tesla’s manufacturing changes are proof of the company’s constant need to improve its products and move things forward with its vehicles. There is no need to drag one’s feet and wait until next year if the product can be made better right now, and that’s precisely what Tesla did with the Cybertruck.





