Connect with us

News

Tesla launches Giga Berlin hiring spree with 28 new job postings in three days

(Credit: Tesla)

Published

on

Tesla is preparing for Giga Berlin’s first operational period in what is expected to be July 2021 by posting several new employment opportunities at the electric automaker’s initial European vehicle production facility.

In the past three days, Tesla has listed 28 new job postings in a wide range of categories. From Human Resources to Construction & Facilities to Engineering & Information Technology and beyond, Tesla is gearing up for the final touches on the construction processes and the initial portions of vehicle manufacturing at the site. Past reports from Germany have indicated that Tesla will hire around 7,000 employees ahead of the manufacturing phase’s initial runout. The automaker has already hired some of those 7,000, with many being placed as warehouse employees as of November 2020. Additional jobs have likely been fulfilled since then, but which positions Tesla has hired so far remain unknown.

Some of the new jobs involve training new employees, a Human Resources position, others have to do with CAD design, others have to do with manufacturing. However, with the first date of production quickly approaching, there is no secret that Tesla is looking to fill these positions in an efficient manner. July 2021 has been listed as the month when production and deliveries of the Model Y could begin.

One of the more notable additions to Tesla’s Career page relating to jobs in Grünheide is a Manufacturing Engineer who will assist in Press/Stamping lines.

Tesla has used stamping methods for some of its vehicle parts, including the Model Y body and the Model 3 frunk. Additionally, the Giga Press has been one of the automaker’s true claims to fame in terms of manufacturing. The Giga Press has been effective for creating single-piece rear castings for the Model Y crossover. The Model Y will be the first car built at the Giga Berlin facility.

Tesla Giga Berlin closes in on trial runs as new Model Y bodies are spotted on site

Advertisement
-

Tesla utilizes the Giga Press at its Fremont Factory in Northern California and recently shared a video of the massive machine in action. The Giga Press’s purpose is to eliminate the number of parts that make up a casting, making manufacturing more efficient and less time-consuming. It also can improve the durability and rigidity of the vehicle’s structure in the event of an accident.

Giga Berlin could be Tesla’s golden goose in terms of breaking through a highly-competitive European EV market. While Tesla performed well in the German EV market in February, displacing Volkswagen from dominating the podium, the automaker has not performed well collectively in the European sector. According to the EV Sales Blog, no Tesla vehicles managed to crack the Top 20 in sales in January 2021, but Giga Berlin will likely change Tesla’s mediocre performance.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Investor's Corner

Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet

Elon Musk says Starship Flight 15 will try to catch the ship itself, a first.

Published

on

By

Elon Musk says SpaceX’s next Starship flight will try something nobody has done before, by catching the ship itself. Speaking to roughly 2,000 people at the X Takeover event at Giga Texas on Saturday, Musk said Flight 15 is about four to six weeks away and “probably launches a little bit before Thanksgiving, is my guess.”

That is a slip from earlier reporting, which had pointed to a launch as early as October 19. Musk explained why the date keeps moving. “We’re making a bunch of improvements to the rocket between every flight,” he said, adding that there are often hundreds, sometimes thousands, of small changes. This time the list is short, “but some of them take a fair bit of work and we’ve got to go inside the tank to make some of these changes.”

“We’re going to try to catch the ship, which is a super big deal,” Musk said. “If we do so, that’ll be the first time that there’s been full recovery of an orbital class rocket.” SpaceX has already caught the Super Heavy booster with the tower’s mechanical arms, and has talked about catching the ship since late 2025, but the upper stage has never been caught.

Musk also laid out what comes after. “The next big milestone would be to refly both the booster and the ship,” he said, describing a Flight 16 where “all parts of an orbital rocket are reflown.”

The reason SpaceX wants this comes down to cost and cadence. Every Starship ship so far has ended its flight in the ocean, and SpaceX expects most of those water landings to end in fireballs. A ship that returns to Starbase intact can be inspected and flown again. SpaceX’s IPO filing, says Starship V3 is designed to deliver 100 metric tons to orbit in a fully reusable configuration, that SpaceX aims to cut the cost to reach orbit by 99% or more versus the historical average, and that tower catches should allow “multiple launches per day.”

Advertisement
-

The payoff goes beyond cheaper launches. The next generation Starlink V3 satellites are too large for Falcon 9 and can only fly on Starship, which can carry up to 60 per flight. Flight 14 on September 28 deployed the first 26 of them after Starship reached orbit despite an early engine shutdown, as Teslarati reported. Musk blamed engine computer software, and said the heat shield “was extremely robust,” which he claimed in August had solved Starship’s biggest challenge.

NASA’s Moon plans depend on the same capability. NASA’s inspector general has described a lander mission that needs a propellant depot in low Earth orbit and more than 10 tanker flights, with SpaceX targeting one tanker launch every six days. That schedule only works if ships and boosters come back fast and fly again. Also, ship to ship propellant transfer has not been attempted yet.

One interesting hurdle yet to be explored is bringing the ship back to the launch site, with reentry over land, which will undoubtedly come with a lot of aviation safety reviews.

Continue Reading

Lifestyle

Tesla’s mirrorless Cybercab will give riders a visibility upgrade

Tesla engineer confirms Cybercab update letting riders pull up rear and repeater cameras on demand.

Published

on

By

Tesla Cybercab camera visibility for passengers (Credit: Dan Burkland via X)
Tesla Cybercab camera visibility for passengers (Credit: Dan Burkland via X)

Tesla is working on a Cybercab update that would let passengers pull up the vehicle’s rear and side cameras on demand, and the request came straight from a rider.

The exchange played out on X late Friday. Cybercab rider Dan Burkland shared photos of the two-seater’s cabin screen after an evening ride, praised the UI team’s work, and left one request: let riders open the rear and repeater cameras whenever they want, “especially for peace of mind.” Tesla UI software engineer Evan (@CarCoder) answered with two words: “In development.”

The idea fits a pattern Teslarati has tracked since public rides began. Days after paid Cybercab service opened in Austin, Tesla sent riders a survey that asked them to rate the touchscreen, the app and the cabin, and to pick the features they wanted most. We reported on that survey in September, and a camera view is the kind of small software change Tesla can push quickly if riders keep asking.

Advertisement
-

It also speaks to something unique about the vehicle. With no steering wheel, no pedals and no driver, passengers have no mirror to check and no way to see behind them. The hardware is clearly built for camera awareness, from the repeater cameras to the rear camera. Letting a passenger look through those same cameras would give a nervous first time rider a way to confirm what is around the car.

The timing matters because the fleet is growing fast. Tesla’s Robotaxi account said on Saturday that more than 300 Cybercabs are now serving Austin, an eightfold increase in 30 days, and Tesla AI chief Ashok Elluswamy named Dallas as the next city. More cars and more cities mean more people riding in a driverless vehicle for the first time, which is exactly when small trust features carry weight.

For now, the feature is confirmed only as in development. If Tesla follows its usual pattern with Cybercab software, riders could see it appear in a point release without any announcement, and Teslarati will watch for it.

Continue Reading

News

Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next

Tesla confirms its first official Cybercab fleet number as Austin scales fast and Dallas looms.

Published

on

By

Tesla says more than 300 Cybercabs are now serving Austin, the first time the company has put an official number on its active Cybercab fleet. The figure came from the Robotaxi account on X on Saturday, which wrote that one month after launch the service had “scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days.”

Ashok Elluswamy, Tesla’s head of AI software, quoted the post with a line that carried the bigger news. “Two years since the 10/10 Cybercab WeRobot event, the cabs are everywhere in Austin now. Dallas soon,” he wrote. It is the first time Tesla has named the next city for public Cybercab rides.

Tesla opened Cybercab rides to the public in Austin on September 4, as Teslarati reported, a day after an invite only launch event. The ramp since then has been steep. Our September 28 report had the fleet at well over 100 units after availability jumped from 58 to 125 in a single week. On Thursday, Tesla added 150 Cybercabs to the Texas automated vehicle registry, lifting its registered count to 319 from 169. The first seven appeared on the registry on August 31.

RobotaxiTracker, a community site that counts vehicles from sightings and state records, listed 275 vehicles in unsupervised service in Austin on Saturday, 105 of them Cybercabs, which is well below Tesla’s figure. Tracker counts can lag official numbers, though Sawyer Merritt noted that Cybercab wait times in Austin stayed short on Saturday evening even with more than 2,000 fans in town for X Takeover.

Advertisement
-

Regulators are watching the rollout. NHTSA opened an audit query into Tesla’s certification that the Cybercab meets federal safety standards, and sworn answers are due October 30. Tesla reports third quarter earnings on October 21, which gives the company a natural venue to define its fleet numbers and put a date on Dallas.

Continue Reading