Connect with us
Red Tesla Model S P100D+ badge Red Tesla Model S P100D+ badge

News

Tesla’s two Model S ‘Plaid’ variants are being benchmarked against each other

Red Tesla Model S P100D+ spotted at the Nurburgring with upgraded rear diffuser (Photo: Teslarati)

Published

7 years ago

on

True to its word, Tesla has returned to the Nürburgring with two “Plaid” Model S units. Both vehicles have been spotted running hot laps since they arrived at the iconic German racetrack, and if recent observations are any indication, it would seem that Tesla has actually brought two variants of its track-capable Model S for its Nürburgring comeback. What’s more, it seems that Tesla is benchmarking the performance of the two Plaid Model S against each other. 

Tesla’s Plaid Model S units in the Nürburgring could be differentiated by their color and rear badges. One is a blue unit with a Dual Motor badge, while the other is a red vehicle that’s marked P100D+. Recent reports and accounts from sources in the area suggest that these two vehicles do not have the same performance. While both are Plaid Model S prototypes, their track results suggest that they are somewhat different, perhaps along the same lines as Porsche’s Taycan Turbo and Turbo S variant. 

The differences between the two vehicles were hinted at last month during Tesla’s first excursion into the Nürburgring. Observing the two vehicles, a photographer from motoring publication Motor Authority mentioned that the blue Plaid Model S was able to complete a lap around the iconic German track in 7:40, a couple of seconds faster than the record set by the Porsche Taycan Turbo. 

The same photographer also recorded an impressive 7:23 lap with the red Model S Plaid unit, which is identical to a hand-timed lap reported by German media outlet Auto Motor und Sport. Quite interestingly, Tesla departed from its initial Nürburgring rounds after the red Model S Plaid unit seemingly broke down in the middle of a hot lap. 

These two vehicles returned to the Nürburgring this week. This time around, the Plaid Model S units sported a refreshed widebody kit that included side vents, and in the case of the blue unit, a massive rear diffuser reminiscent of the one used by Tesla in the next-generation Roadster. Images taken of the red Plaid Model S’ return to the nearly 13-mile closed circuit revealed that the vehicle was not equipped with a rear diffuser, though it had the same side vents and large rear spoiler with Gurney flap found in its blue sibling. 

Interestingly, images recently acquired by Teslarati reveal that Tesla has installed the same large rear diffuser in its red Model S at the Nürburgring. The vehicle was brought over to the track at the back of the truck, and once on the road, it was clear that the additional aeros have been installed on the vehicle. A closeup picture of the track-capable flagship sedan further revealed that the red Model S Plaid was fitted with a front lip spoiler as well. 

Advertisement
-

With these images in mind, it appears that Tesla is currently testing how each Plaid Model S prototype performs on the Nürburgring with and without additional aeros. This suggests that Tesla is likely benchmarking the two Model S Plaid units against each other, potentially as a way to refine and tune each vehicle’s performance for closed circuit driving. These efforts ultimately bode well for Tesla’s upcoming Plaid versions for the Model S and Model X, as the electric car maker appears to be leaving no stone unturned in its efforts to develop a flagship vehicle that can attack one of the racing world’s most notorious tracks with no hesitation. 

Elon Musk has mentioned a few details about Tesla’s upcoming Plaid Model S. For one, the vehicle will have three motors, similar to the next-generation Roadster, which is equipped with one electric motor at the front and two at the rear. Musk also stated in a recent tweet that the production Plaid Model S, which will reflect the final iteration of the car that will set Tesla’s official Nürburgring record, is set to enter its manufacturing stage sometime in Summer 2020. Pricing for the Tesla Model S Plaid variants have not been revealed by Tesla, though Elon Musk has mentioned that the vehicles will be priced higher than the current top-tier Raven Model S Performance with Ludicrous Mode. 

Red Tesla Model S P100D+ spotted at the Nurburgring with rear diffuser (Photo: Teslarati)

 

Related Topics:

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Cybercab ownership will come with plenty of strings attached

Published

6 hours ago

on

November 14, 2026

By

Credit: Tesla

Tesla’s long-promised Cybercab is finally available for personal purchase, at least for a select few in the Austin area. But it’s far from a straightforward ownership experience.

The $29,990 price tag comes with a stack of restrictions that redefine what “owning” the vehicle actually means. The two-seat, steering-wheel-free Robotaxi, previously limited to Tesla’s own fleet, now carries contractual terms that limit where it can go, how it can be used, and whether it can even move without an active paid subscription.

Opening Night of Orders

Late on November 13, Tesla announced that select customers were being invited to order a Cybercab for personal use.

Tesla Cybercab goes on sale for $29,990, slated for December deliveries

The estimated purchase price is $29,990 before taxes, paired with a non-refundable $1,000 deposit and an estimated December 2026 delivery in Austin, Texas. The first month of the required :Autonomy Subscription,” priced at $299 per month is included.

After that, the vehicle needs an active subscription to operate at all. The announcement confirmed that customer sales had begun, albeit on an invite-only basis rather than a public order page.

Advertisement
-

The Fine Print for Buyers

For those invited to order, the agreements (Cybercab Order Agreement, Terms of Use, and Autonomy Subscription Agreement) impose significant constraints. Major points include:

  • A mandatory Autonomy Subscription (currently listed at $299 per month on the order screen, first month included) is required; without it, the Cybercab will not operate.
  • Personal, non-commercial use only; ride-hailing, Robotaxi network participation, delivery, or rental requires separate written authorization or product enablement from Tesla.
  • Operation restricted to Tesla-enabled Robotaxi geofences and supported service areas, which the company can expand, shrink, or alter; the vehicle may be technologically prevented from operating outside them.
  • No unauthorized modifications (including wraps, window tint, or wheel changes) without Tesla or an authorized provider.
  • Restricted resale and transfer: written permission required, with contractual damages of at least $50,000 (or full transaction value if higher) for unauthorized sales; Tesla also reserves repurchase rights at a company-determined fair market value, with the owner covering return costs.
  • Safety or improper-use “strikeouts” (three or more) can trigger a one-week suspension of autonomous features without prorated refund.
  • Owners remain responsible for insurance, registration, charging, parking, and general cleaning; the subscription covers certain maintenance items such as tires, windshields, filters, and camera cleaning, plus limited towing.
  • Manual controls on the touchscreen allow only short-distance movement up to about 2 mph and require a valid driver’s license; they are not for public-road driving.

Why These Terms Might Exist

Tesla’s approach prioritizes control over a vehicle designed without traditional human controls and intended primarily as transport-as-a-service, something that Musk has hinted toward for some time now. Restricting commercial use and modifications could be as much of a software integrity, safety, and data collection effort as it is a safety effort.

Fleet consistency could also be in regulatory scrutiny early on in the Cybercab’s days of public operation.

The subscription model generates ongoing revenue beyond the low vehicle price and ensures the car remains connected and updatable, something that will keep the Cybercab as safe as possible as new updates roll out.

Buyback and resale limits reduce the risk of vehicles circulating outside Tesla’s operational and service ecosystem.

Advertisement
-

It apperas that personal ownership is secondary to the broader Robotaxi network strategy, as Musk has previously stated that the vast majority of Cybercabs would remain Tesla-owned.

Pickup Locations and Musk’s Pricing View

Initial deliveries are estimated for Austin, but personal vehicles are able to operate in any of Tesla’s Robotaxi geofences:

Those who have been invited to order can also have their personal Cybercab delivered to numerous locations in Texas, including:

  • Austin
  • Dallas
  • Houston
  • San Antonio
  • Fort Worth

As far as the monthly “Autonomy Subscription,” it appears Musk already wants it to be low. He acknowledged last night on X that the subscription price is too high. Along with detailing that the Cybercab will be available nationwide as regulatory approval is received, Musk said the monthly fee should match the cost of FSD and Premium Connectivity, which is about $115 per month.

The launch marks a milestone for unsupervised personal autonomous vehicles, but the fine print makes clear that buyers are purchasing a highly constrained asset whose usefulness is tightly bound to Tesla’s software, service network, and geographic approvals.

Continue Reading

News

Tesla Cybercab goes on sale for $29,990, slated for December deliveries

Published

20 hours ago

on

November 13, 2026

By

Credit: Tesla

Tesla has officially put the Cybercab up for sale, revealing a bargain price and a $299 per month “Autonomy Subscription” that could hit customer hands as soon as December.

The offer requires a $299 monthly Autonomy Subscription, with the first month included in the purchase price, along with a $1,000 non-refundable order deposit. Tesla’s ordering interface shows deliveries targeted for Austin, Texas.

Tesla says that the Cybercab is making transportation more efficient, affordable and accessible than ever before, and that buyers can order their own Cybercab for personal use.

Advertisement
-

The Cybercab is Tesla’s dedicated robotaxi, a gold-finished, two-passenger vehicle without a steering wheel or pedals, designed from the outset for unsupervised autonomous operation. It has been in limited Robotaxi service in Austin since September 2026, operating alongside Tesla’s larger fleet of Model Y vehicles.

Production takes place at Gigafactory Texas, which launched earlier this year. Tesla has stated for some time that it planned to put Cybercabs on sale by the end of the year, and it looks like they will come through on that promise if everything goes according to plan.

The Autonomy Subscription is mandatory for the vehicle to operate because it is void of a steering wheel and pedals. Tesla notes that the subscription and regular vehicle maintenance are required, indicating that personal owners will depend on the company’s software and service infrastructure rather than traditional ownership models.

One month of the subscription is included with purchase and subsequent months are billed separately until canceled.

This limited personal-sales opening marks a shift from Tesla’s earlier emphasis on fleet and transport-as-a-service operations. During the Q3 2026 Earnings Call, executives indicated that the vast majority of Cybercabs would remain Tesla-owned and used for rideshare service, while still aiming to place some vehicles with customers by year-end.

Elon Musk has previously targeted a price below $30,000, which was a huge point of emphasis for the Cybercab being the central point of Tesla’s “transportation-as-a-service” model.

Advertisement
-

Availability remains restricted to invited customers rather than a public order page, and the initial deliveries are expected only in the Austin area where unsupervised Robotaxi operations are already active. Buyers will need to accept the geographic and operational constraints of current autonomous deployment, as the vehicle cannot be driven manually outside supported zones.

The move gives a small number of early buyers the chance to own Tesla’s dedicated autonomous vehicle at the long-discussed sub-$30,000 price point, while the bulk of production continues to support the company’s expanding Robotaxi network.

Continue Reading

News

SpaceX Starship Flight 15: How to watch the double catch attempt

Published

1 day ago

on

November 13, 2026

By

Credit: SpaceX

UPDATE: The FAA has granted the license for Starship Flight 15.

SpaceX is set to attempt its 15th test flight of Starship this evening from Starbase, Texas.

SpaceX is targeting Starship Flight 15 for a launch as soon as today, Friday, November 13, pending an FAA Flight License, during a 75-minute window that opens at 4:45 p.m. CT (5:45 p.m. ET) from Orbital Launch Pad 2 at Starbase, Texas. The flight remains pending final regulatory approval.

Advertisement
-

The mission, using Booster 22 and Ship 42, aims to achieve the first full recovery of an orbital launch system. Primary objectives include a tower catch of the Super Heavy booster roughly six and a half minutes after liftoff and the first-ever tower catch of a Starship upper stage after more than 22 hours in space.

SpaceX will perform Starship double catch attempt with Flight 15

Between those catches, Ship 42 is planned to enter a low Earth orbit of about 275 km, complete roughly 14 orbits, and deploy 26 next-generation Starlink V3 satellites (Starlink Group 31-2). Three of those satellites carry cameras to inspect the ship’s heat shield in orbit and help controllers decide whether the vehicle is healthy enough for a return to the tower.

Advertisement
-

Contingency ocean splashdown options exist if either stage is not cleared for catch.

To watch the attempt, check the link to the broadcast in both X posts in this article. The live webcast is scheduled to begin about 30 minutes before liftoff and is planned to continue through the ship catch the next day, with the possibility of extended onboard views during the orbital coast via Starlink.

Because the schedule is dynamic, check back here or on our social media channels for the latest updates on window timing and regulatory status. A successful dual catch would mark a major milestone toward making Starship a rapidly reusable rocket capable of frequent flights.

Advertisement
-
Continue Reading