Connect with us
tesla yoke v2 tesla yoke v2

News

Tesla v2 Yoke with ‘improved materials’ rumored to come this Summer

Credit: Sofiaan Fraval

Published

on

Tesla will have a new Yoke steering wheel with “improved materials” coming in July 2023, a Service Advisor said.

“A new yoke with improved materials will be available to service in July 2023,” a Tesla Service advisor said to Reddit user u/Global_Chaos. “We do not recommend replacing the Yoke until improved parts are available.”

Interestingly, this comes just weeks after Tesla started offering a retrofit round steering wheel kit for the Yoke for $700 on its website. The Yoke has been a polarizing vehicle feature since it was first implemented on Model S and Model X refreshes in Summer 2021.

The Yoke was a standard feature on those vehicles and remained that way until early this year when it started offering buyers the option to have the traditional round wheel fitted on their vehicle.

The July 2023 timeline of the new, improved Yoke coincidentally fits Tesla’s proposed timeline for the start of Cybertruck production. After the most recent Beta production builds featured a new Yoke design, we can only speculate that Tesla could offer something similar to what it displayed at the recent Investor Day.

Tesla Cybertruck pre-production beta shows new interior features

Advertisement
-

The design seen in the Cybertruck’s interior is more round and is slightly different than the current iteration that Tesla offers. While we cannot currently confirm the new Yoke design that Tesla plans to offer is this one, the timing alone is something to consider as a potential indication that it could be similar.

Tesla has improved on vehicle materials in the past, opting for more sustainable vegan leather several years ago.

The Yoke has been the subject of some complaints, especially as it is void of stalks that are used for turn signals and other standard vehicle functions.

While the Yoke was Tesla’s first attempt at the design, hopefully, the v2 Yoke will be a vast improvement.

I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.

Advertisement
-

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla Giga Texas reportedly moves to 24/7 production

Published

on

Credit: @JoeTegtmeyer/X

Tesla’s Austin Gigafactory is reportedly shifting to round-the-clock vehicle production through the end of 2026, according to longtime drone observer Joe Tegtmeyer.

In his November 2 update, Tegtmeyer, widely regarded as one of the most reliable independent sources on Giga Texas activity (we call him the Drone GOAT), stated that the plant has added a night shift, creating two 12-hour production shifts.

Tegtmeyer said in his video:

“Now, I do have some interesting news about that when it comes to the production schedule here at Giga Texas, and things are actually looking pretty good, especially when you think about what the demand is and the delivery numbers that they’re looking for and what they’re expecting. So, normally they have shifts Monday through Friday. It’s a day shift and it’s about 10 hours long or so, give or take. But now they’re on day and night shifts and they’re going to 12-hour days. So they’re going to be adding or they have another shift. They have 12 hours for both of them. In addition to that, the typical downtime that we’re going to be seeing around the holidays, specifically Thanksgiving and Christmas to the New Year time frame is actually changed. And we’re not going to see those big several day events where there is no production. At least that’s what the plan is right now. So, it’s really a great sign, I think, when we consider what they’ve done in the past and what production and the deliveries have been so far. So, maybe it’s shaping up to be a really strong quarter.”

Previously, General Assembly typically operated on a single roughly 10-hour day shift, Monday through Thursday or Friday. The new arrangement keeps General Assembly on its Monday-to-Thursday schedule while adding overnight capacity, and most other areas of the factory continue working the full week with some weekend activity.

Notably, the plant is also forgoing the multi-day shutdowns around Thanksgiving and the Christmas–New Year period that have occurred in prior years

Advertisement
-

Giga Texas currently builds the Model Y, the larger Model Y L, the Cybertruck, and the Cybercab robotaxi. Tesla has not confirmed the shift change or specified which lines will receive the extra output. Recent comments suggest Cybercab production has been constrained by the pace at which the Robotaxi fleet can absorb new vehicles, making the Model Y and Model Y L the more likely beneficiaries as the company works through order backlogs.

Tegtmeyer’s November 2 footage and commentary also highlighted broader site progress. Cortex 2 continues to expand, with additional compute coming online, a roughly 25 percent lengthening of the structure on the north end, and work on a third cooling plant.

The Boring Company tunnel site showed increased activity in the large launch pit, while the Advanced Technology Chip Fab (a SpaceX–Tesla joint R&D facility) continued steel superstructure and heavy truss installation, along with concrete pours.

The reported capacity increase arrives as Tesla aims for a strong fourth quarter following solid third-quarter results. While unconfirmed by the company, the information aligns with Tegtmeyer’s consistent track record of accurate on-site observations.

If Tesla makes the decision to sustain the all-day production plans, the dual 12-hour shifts would meaningfully raise weekly output potential at one of Tesla’s most important manufacturing hubs.

Advertisement
-
Continue Reading

News

Tesla opens new “Cybaer” Engineering Center in Berlin

Tesla opened its Berlin Engineering Center, uniting four sites and 30 labs near Giga Berlin.

Published

on

By

Tesla has opened a new engineering hub in Berlin, putting the teams that design and test its European parts about 30 minutes from the factory that builds them.

The Berlin Tesla Engineering Center, or BTEC, opened Wednesday in the Köpenick district. Tesla Europe said on X that the project went from permit to operational in under a year and consolidates four engineering sites and 30 labs onto a single campus. It is the company’s third hub of this kind, after Fremont and Shanghai.

“We’re combining materials, powertrain, vehicle engineering & validation under one roof, enabling a short feedback loop between development & ramp,” Tesla Europe wrote.

 

Tesla converted the former production halls of a cable factory for the site. About 250 engineers and technicians are starting there, most of them relocated from existing Tesla facilities such as Tilburg in the Netherlands. Tesla has already applied for approval of a second phase that would take the headcount to roughly 500, and it put the total investment at €100 million.

Advertisement
-

The labs cover battery cells, motors, materials and complete vehicles, and a large hall is set aside for safety testing of components, including airbags. During the opening, staff demonstrated a pedestrian leg impact test on the front of a Tesla using a catapult rig, Tagesspiegel reported. The center’s logo is a cubist Berlin bear that employees call the “Cybaer.”

Tesla said its Berlin design and engineering teams already contributed to the Model Y, Semi and Roadster, and that the work continues at BTEC. The center will handle technical problem solving for Giga Berlin in Grünheide while also developing and validating parts for vehicles built in China and the United States.

“We came here to stay,” BTEC head Brückner told dpa. “We serve all of Europe via Gigafactory Berlin-Brandenburg.” He said a site close to the plant was a priority, and that the old industrial building allowed Tesla to move quickly.

That proximity matters more now that Giga Berlin is growing again. In June, Tesla said it would raise Model Y output at the plant to 7,500 vehicles per week and hire 1,000 more workers after a record first quarter of more than 61,000 units. The factory recently built 7,000 Model Ys in a single week for the first time. Tesla also more than doubled the planned 4680 cell capacity at the site to 18 GWh per year in May, and has talked about eventually taking Grünheide to one million vehicles annually.

Sales are giving Tesla reason to invest. KBA data released the same day showed Tesla’s German registrations nearly quadrupled year over year in October to 2,932 units, bringing the total for the first ten months of 2026 to 47,742.

Advertisement
-
Continue Reading

News

Ferrari Luce sold out for 2027 after design controversy

Published

on

Credit: Ferrari

Ferrari’s first electric vehicle, the Luce, is fully sold out for 2027, according to CEO Benedetto Vigna.

Presenting third-quarter results, he stated: “Everything we plan to sell next year is already fully allocated. Client test drives, scheduled for next year, will help further boost demand. We have no critical issues, neither on manufacturing nor on the demand side. Obviously, the car is more complex because it has many new parts and many new technologies.”

First customer deliveries are expected before the end of 2026, with the model already commanding waitlists despite a turbulent debut.

The Luce is a five-seat, four-door liftback saloon—the longest Ferrari ever produced—powered by four electric motors producing approximately 1,035 horsepower.

It features an 800-volt architecture, a 122-kWh battery, a claimed WLTP range of around 329 miles, 0-62 mph acceleration in 2.5 seconds, and a starting price near €550,000 in Europe (roughly $560,800–$615,000 in the U.S. depending on configuration).

Developed in collaboration with Jony Ive and Marc Newson’s LoveFrom studio alongside Ferrari’s own Centro Stile, it represents a deliberate departure from the brand’s traditional mid-engine sports cars toward a more spacious, grand-touring format.

Its exterior has proven deeply polarizing. Unveiled in Rome in May 2026, the design features smooth, sweeping surfaces, a large glass roof, and restrained detailing that critics described as bland, generic, or more reminiscent of an Apple product or mass-market EV than a Ferrari.

Ferrari unveils its Luce EV, and its reception has been a disaster

Online reactions included memes comparing it to a Nissan Leaf or Polestar, while former Ferrari chairman Luca di Montezemolo publicly warned of “the destruction of a myth” and suggested the prancing horse logo be removed. Italian politicians and longtime owners joined the chorus of disappointment, and Ferrari’s shares dropped roughly 8% in a single day, erasing billions in market value.

Design experts noted the absence of the brand’s signature tension, aggression, and emotional drama.

Yet the controversy has not translated into weak demand among the ultra-wealthy clientele who actually buy Ferraris. Production volumes remain tightly limited, as reports suggest fewer than 500 units in the current year and a longer-term pace of roughly 600 annually through 2030, preserving exclusivity.

One early chassis sold for $40 million at auction. Vigna has indicated that seeing the car in person, along with upcoming client test drives, is expected to strengthen rather than weaken interest. Ferrari aims for fully electric models to comprise 20 percent of its lineup by 2030, with a second EV now delayed to 2028.

For a brand defined by scarcity and desirability, the Luce’s sell-out status suggests that among those who can afford it, the polarizing design has not proven to be a commercial liability.

Continue Reading