Connect with us

News

Tesla ‘refresh’ of Model S and X isn’t coming, says Elon Musk

(Photo: Tesla Zhejiang Members Club via vincent13031925/Twitter)

Published

on

Elon Musk recently debunked rumors of an upcoming refresh for the Tesla Model S and Model X. In a recent series of tweets, Musk clarified that the flagship vehicles would continue to receive ongoing changes and updates to their design, such as the new high-efficiency Model 3 motors that were fitted into the Model S and X’s front drive units last April. As for a complete refresh involving a new design and interior, Musk stated that there would be no such thing. 

“There is no ‘refreshed’ Model X or Model S coming, only a series of minor ongoing changes. Most significant change in past few years was to use high efficiency Model 3 rear drive unit as S/X front drive unit. That went into production 3 months ago,” Musk wrote in a Twitter post. 

Musk was notably firm in his Twitter responses, stating that there will also be no refresh of the large sedan and SUV’s interior as well. With this in mind, customers looking to purchase either a Model S or Model X are best advised to buy a vehicle today. Otherwise, as noted by one of the CEO’s followers on Twitter, buyers holding out for a refreshed Model S and X will most definitely be waiting for a very, very long time. 

Musk’s recent updates on Twitter stand in contrast to rumors that have emerged over the past month. In early June, for example, speculations from a reported Tesla insider suggested that the company is preparing to release a refreshed Model S with three electric motors and a range that exceeds 400 miles per charge. These rumors, which were reported by Tesla owner-enthusiast Kim in YouTube’s Like Tesla channel, further suggested that the revamped Model S and Model X are currently undergoing testing in extreme heat in areas such as the Mojave Desert and Death Valley. 

Advertisement
-

This was not all. In late May, a report from CNBC, which cited multiple sources from within the electric car maker, claimed that the company was rejiggering its Fremont, CA plant for the upcoming production of a refreshed Model S. Similar to the information related to the YouTube host and Tesla owner-enthusiast, CNBC’s sources also mentioned a battery pack that delivers over 400 miles of range per charge. The publication further claimed that initial production of the refreshed flagship sedan could begin as early as September.

While Elon Musk has stated that there won’t be a full refresh for the Model S and Model 3, the CEO did assure the Tesla community that the two vehicles will continue to get improved over time. With this in mind, those purchasing the cars today and in the coming months will most definitely receive the best that the company has to offer with regards to its two flagship vehicles. As for the rumored improvements that are reportedly part of the Model S and X’s upcoming refresh, perhaps these will be rolled out as improvements as well. 

Musk’s recent announcement stands as yet another proof that Tesla is no ordinary carmaker. Traditional automakers do not release incremental improvements on their vehicles; instead, they release a set of updates in a refreshed version a few years later. Tesla moves far quicker than this, rolling out improvements and efficiencies to its electric cars as soon as the technology is available. With this in mind, it appears that “refreshed” or not, the Model S and Model X will retain their place as two of the best premium EVs in the market today.

Advertisement
-

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

How SpaceX Is raising Raptor’s sea-level thrust while holding engine mass steady

Published

on

Credit: SpaceX

SpaceX’s Raptor engine family has steadily increased sea-level thrust while simultaneously reducing mass, turning iterative engineering gains into substantially higher performance for the Super Heavy booster. CEO Elon Musk shed more light on how powerful Raptor 4 will be, and it’s pretty crazy.

Raptor 1 delivered 185 metric tons of thrust at roughly 2,080 kilograms, while Raptor 2 raised that to 230 tons while cutting mass to about 1,630 kilograms. SpaceX data for Raptor 3 lists a target of 280 tons at 1,525 kilograms (with further reductions in associated vehicle hardware), while operational flight ratings have been cited near 250 tons.

This morning, Elon Musk stated that Raptor 4 is expected to reach 300 tons of sea-level thrust at roughly the same mass as Raptor 3. Across these versions, thrust has risen by more than 60 percent from the first engines while engine mass has fallen, producing a sharp improvement in thrust-to-weight ratio. This is a true testament to how great SpaceX engineering has been:

With 33 engines on SuperHeavy, the jump from earlier versions to a 300-ton Raptor 4 would produce roughly 9,900 metric tons of total liftoff thrust, nearly three times the Saturn V’s approximately 3,400 metric tons from its five F-1 engines.

This is not just a larger number on a data sheet, either, as sea-level thrust is the force available the moment the vehicle leaves the pad. This is when it is heaviest and still deep in Earth’s gravity well and dense atmosphere.

Higher levels of sea-level thrust directly improves the initial thrust-to-weight ratio of the full stack. A higher ratio produces faster acceleration off the pad, which shortens the time the rocket has to spend fighting gravity, and gravity losses during the first minute or two of the flight are a major drain on total available delta-v. Every second shaved off of that early climb preserves more propellant energy for reaching orbital velocity or for carrying extra payload.

Because Super Heavy’s engine count is constrained by vehicle diameter and packing density, increasing thrust per engine is the most straightforward way to raise total liftoff performance without redesigning the booster structure or design.

The same-mass target for Raptor 4 is equally important. Holding engine mass roughly constant while raising thrust improves the engine’s own thrust-to-weight ratio and reduces the structural and propellant mass fraction that must be carried solely to support the engines.

Advertisement
-

Earlier Raptor iterations also simplified or eliminated extensive vehicle-side hardware such as heat shields. These gains compound: more force for less installed mass leaves additional capacity for propellant, payload, or operational margins such as engine-out capability.

For Starship’s architecture, the practical effects are large. Greater liftoff thrust supports heavier vehicles, larger propellant loads, and higher payloads to low Earth orbit, figures SpaceX has targeted in the 100-plus-ton reusable range. That capacity underpins orbital refueling, lunar missions, and eventual Mars cargo and crew flights.

Continued growth in sea-level thrust therefore tightens the gap between theoretical rocket performance and the high flight rates and reusability needed to make large-scale space transport practical.

Continue Reading

News

Tesla Assisted Driving expands to tenth EU country

Published

on

Tesla has expanded its Tesla Assisted Driving (TAD) suite to its tenth European country, as Latvia joined a growing list of European Union member states authorizing the company’s advanced driver assistance technology.

Tesla Europe announced this morning that the system is now approved in Latvia, with a software rollout to begin soon.

The approval and rollout follow recognition of a provisional European type approval originally granted by the Netherlands’ RDW authority on April 10.

Latvia’s Road Traffic Safety Directorate (CSDD) evaluated the Dutch documentation, coordinated with the other national authorities, and reviewed updates from Tesla. These included tightened limits on speed offsets, automatic resets of any manual speed adjustments after each trip, and stronger driver monitoring.

In Europe, the feature is marketed as Tesla Assisted Driving after a recent rule change that labeled the name “Full Self-Driving” as misleading.

Tesla starts showing how FSD will change lives in Europe

The system remains an SAE Level 2 driver assistance tool, not unsupervised autonomy. It can control speed, steering, braking, lane changes, and intersections while following a navigation route. Drivers need not keep their hands on the wheel at all times, yet they must continuously monitor the road and be prepared to intervene immediately.

The sequence of EU recognitions began with the Netherlands in April and continued through Lithuania, Estonia, Denmark, Belgium, Slovenia, Czechia, Croatia, and Slovakia. Most have relied on mutual recognition of the single Dutch provisional approval rather than independent national testing.

Advertisement
-

These national clearances do not yet constitute bloc-wide authorization. An EU-wide decision requires a qualified majority in the Technical Committee on Motor Vehicles: at least 15 of 27 member states representing 65 percent of the EU population. Larger markets, like Germany, France, and Italy, remain under review, and a vote is expected this December.

However, for Latvian Tesla owners with compatible vehicles and software, the imminent rollout expands access to the supervised system while underscoring that attentive human oversight remains essential.

Continue Reading

News

Tesla expands Robotaxi geofence in Houston with an ode to SpaceX merger

Published

on

Tesla expanded its Robotaxi geofence in Houston, Texas, today, enlarging the service area and drawing a new rocket-shaped boundary across the city’s northwestern and central parts.

Although CEO Elon Musk said it was just a coincidence, the expansion seems to be an ode to SpaceX and its potential merger with Tesla.

The official Tesla Robotaxi account announced the change with the lines “Houston, we have liftoff” and “Bigger service area now live,” pairing them with a map overlay.

Advertisement
-

The prior white geofence, roughly 25 square miles covering Jersey Village, Harvest Bend, and the Willowbrook corridor along U.S. 290 and State Highway 249, now sits inside a larger blue zone that stretches southeast toward Bellair and closer to central Houston.

Houston’s Robotaxi service launched on April 18, 2026, the same day as Dallas, as Tesla’s first unsupervised public expansion beyond Austin. From the start, the vehicles were Model Ys running without anyone in the front seats, booked through the dedicated Tesla Robotaxi app and open to the public inside the geofence.

Trackers measured the initial zone at about 25 square miles; by late September it had not grown substantially. Community and registry data indicated a modest local fleet of unsupervised Model Ys, while dozens to nearly 200 Cybercabs, the purpose-built, steering-wheel-free two-seaters, have been spotted staging and testing in Houston lots, though public Cybercab rides remain limited to Austin for now.

Across the broader Robotaxi program, Tesla began public Robotaxi rides in Austin in June 2025, as a small geofence and vehicles with safety monitors became available for a ride-hailing service. Later on, Tesla removed the monitors and steadily expanded the service area until it covered most of the Austin metro area.

Unsupervised Robotaxi services now run in six cities: Austin, Dallas, Houston, Miami, Orlando, and Tampa. Cumulative driverless miles reported by the company have reached several million. The Cybercab entered public service in Austin in early September 2026 and has scaled rapidly there. The company has also said that Dallas is next for Cybercab rides in November, with further cities and 24/7 hours targeted by year-end, plus fleet-operator sales of the vehicle.

Waymo also operates a fully driverless service in Houston, which has been open to the public since August of this year.

Advertisement
-

The Houston expansion continues Tesla’s pattern of starting with tightly controlled validation zones before widening coverage as real-world data accumulates, while the rocket motif on the map underscores the company’s habit of injecting visual flair into its autonomy rollout.

Riders inside the new boundary can request unsupervised Model Y trips in the Robotaxi app; exact operating hours and further Cybercab availability remain subject to app updates and company statements.

Continue Reading