During Tesla’s Q4 and FY 2020 earnings call, CEO Elon Musk remarked that the Cybertruck, the company’s all-electric pickup, will require a Giga Press that’s larger than the already-massive machines installed for the Model Y rear underbody in the Fremont Factory. A video of the first of these machines was recently shared by IDRA Group, the company that produces the house-sized die-casting contraptions.
While IDRA did not name Tesla directly in its video, the Italy-based company noted that a leading manufacturer of electric cars has ordered its first 8,000-ton die-casting machine. Apart from being an evident reference to Tesla, IDRA’s mention of the machine’s specs also mirrors that of Elon Musk’s statements during the previous earnings call. While addressing an analyst’s inquries, the CEO noted that the Cybertruck would be “using an 8,000-ton casting press for (its) rear body casting.”
“Once again, IDRA makes a world’s first for technological innovation, and we are very proud to announce that today, on the 16th of March 2021, we’ve been able to secure the first order for an 8,000-ton die-casting machine. This order is being placed by a leading global manufacturer for new energy vehicles,” IDRA General Manager Riccardo Ferrario said.
The Tesla Model Y is being produced with a Giga Press, a formidable machine capable of producing the all-electric crossover’s single-piece rear underbody. The Model Y’s Giga Press is a 6,000-ton contraption, but as Musk mentioned during the Q4 and FY 2020 earnings call, since the Cybertruck is a larger vehicle, it would require an even larger die-casting machine. Interestingly enough, the IDRA General Manager mentioned in the company’s recent video that the 8,000-ton press is designed to create components for large vehicles like the Cybertruck, among others.
“This giant machine will be used for the production of chassis components of larger vehicles such as pickup trucks, full electric lightweight goods vehicles, and SUVs. It is a maestro, and not only shows the capabilities of IDRA’s technical superiority, but also validates the many, many years of hard work that have gone into realizing this project,” Ferrario said.
Particularly noteworthy in IDRA’s video was the General Manager’s mention of other vehicles like SUVs and full electric lightweight goods vehicles that could be produced during the 8,000-ton Giga Press. Considering that the 8,000-ton Giga Press can create larger parts, the idea of a Tesla transit van or perhaps a large, full-size SUV may be feasible. Elon Musk noted in his Master Plan, Part Deux, that Tesla would be expanding its EV lines to address major segments, after all. With this in mind, the Cybertruck’s Giga Press could very well be the machine that takes Tesla a step closer to completing the second phase of Musk’s grand strategy.
Watch a video of the Cybertruck’s 8,000-ton Giga Press in the video below.
Don’t hesitate to contact us for news tips. Just send a message to tips@teslarati.com to give us a heads up.
News
Tesla watchers spot mysterious castings at Fremont Factory
The castings seem to be quite new, as they do not seem to match any of the castings that are currently being used for the Model Y.

A recent flyover of the Fremont Factory has triggered speculations about Tesla’s ongoing initiatives that are yet to be unveiled publicly. This was hinted at by the sighting of some apparent vehicle castings around the factory that have never really been observed before.
A Fremont Factory flyover
In a recent update, drone operator Met God in Wilderness, who has been chronicling the progress and developments of the Fremont Factory for years, shared some footage from his August 14, 2025 flyover. Based on the video, the Fremont Factory seemed very much alive. Vehicles were being pumped out of the factory, and a rather interestingly covered car could be seen going around the test track.
What is quite fascinating about the footage from the Fremont Factory is the fact that the vehicles that were moving from the production line to the outbound logistics lot are not driven manually anymore. As per Tesla in previous updates, vehicles produced at the Fremont Factory navigate to the outbound logistics lot on their own using Unsupervised FSD.
Mysterious castings
Perhaps most interestingly, the drone operator also managed to capture some footage of some castings that were being gathered just outside one of the facility’s sprung structures. These castings seem to be quite new, as they do not seem to match any of the castings that are currently being used for the Model Y. This has brought speculations suggesting that the new components, which seem smaller than standard Model Y megacasts, may be for a different, perhaps more compact, vehicle.
As per Tesla in its second quarter earnings call, the company actually started the initial production of more affordable models sometime in June. These vehicles, as per Elon Musk, will be made available for consumers in the fourth quarter. “Given that we started in North America and that our goal is to maximize production with higher rates by the end of Q3, we’re going to keep pushing hard on our current models to avoid complexity… We’ll be running with the more affordable models available for everyone in Q4,” Musk said.
Watch the recent drone footage of the Fremont Factory in the video below.
Investor's Corner
Shareholder group urges Nasdaq probe into Elon Musk’s Tesla 2025 CEO Interim Award
The SOC Investment Group represents pension funds tied to more than two million union members, many of whom hold shares in TSLA.

An investment group is urging Nasdaq to investigate Tesla (NASDAQ:TSLA) over its recent $29 billion equity award for CEO Elon Musk.
The SOC Investment Group, which represents pension funds tied to more than two million union members—many of whom hold shares in TSLA—sent a letter to the exchange citing “serious concerns” that the package sidestepped shareholder approval and violated compensation rules.
Concerns over Tesla’s 2025 CEO Interim Award
In its August 19 letter to Nasdaq enforcement chief Erik Wittman, SOC alleged that Tesla’s board improperly granted Musk a “2025 CEO Interim Award” under the company’s 2019 Equity Incentive Plan. That plan, the group noted, explicitly excluded Musk when it was approved by shareholders. SOC argued that the new equity grant effectively expanded the plan to cover Musk, a material change that should have required a shareholder vote under Nasdaq rules.
The $29 billion package was designed to replace Musk’s overturned $56 billion award from 2018, which the Delaware Chancery Court struck down, prompting Tesla to file an appeal to the Delaware Supreme Court. The interim award contains restrictions: Musk must remain in a leadership role until August 2027, and vested shares cannot be sold until 2030, as per a Yahoo Finance report.
Even so, critics such as SOC have argued that the plan does not have of performance targets, calling it a “fog-the-mirror” award. This means that “If you’re around and have enough breath left in you to fog the mirror, you get them,” stated Brian Dunn, the director of the Institute for Comprehension Studies at Cornell University.
SOC’s Tesla concerns beyond Elon Musk
SOC’s concerns extend beyond the mechanics of Musk’s pay. The group has long questioned the independence of Tesla’s board, opposing the reelection of directors such as Kimbal Musk and James Murdoch. It has also urged regulators to review Tesla’s governance practices, including past proposals to shrink the board.
SOC has also joined initiatives calling for Tesla to adopt comprehensive labor rights policies, including noninterference with worker organizing and compliance with global labor standards. The investment group has also been involved in webinars and resolutions highlighting the risks related to Tesla’s approach to unions, as well as labor issues across several countries.
Tesla has not yet publicly responded to SOC’s latest letter, nor to requests for comment.
The SOC’s letter can be viewed below.
News
Tesla Model Y L has two distinct features for luxurious comfort
This is not to say the other interior additions are not factors in the Model Y becoming a more luxurious and premium vehicle, but the two mentioned in this article are particularly pertinent in that conversation.

Tesla’s new Model Y L has two distinct features that are geared toward giving occupants a taste of luxury with guaranteed comfort.
These two features should definitely be part of the company’s future lineup, and they could prove to be massive upgrades to the Model Y’s interior, which is certainly premium but is missing some things that truly tailor to a “luxury” feel of an automobile.
This is not to say the other interior additions are not factors in the Model Y becoming a more luxurious and premium vehicle, but the two mentioned in this article are particularly pertinent in that conversation.
Tesla Model Y L might not come to the U.S., and it’s a missed opportunity
Power-Adjustable Thigh Supports
In the front seats of the Model Y L, there are power-adjustable thigh supports that will enable some additional comfort on the legs:
The Tesla Model Y L features power-adjustable thigh supports for the front seats pic.twitter.com/1tBQG0KznK
— The Tesla Newswire (@TeslaNewswire) August 19, 2025
Most might think that these thigh supports are simply a feature that makes the ride more comfortable, which is true. However, they have benefits for the ride and after you exit the car.
Providing proper lift on the legs and thighs can be beneficial for people with back problems or posture issues. The lower back takes an increased amount of stress during long car rides, especially as the legs are fixed in the chosen seating position.
Tesla Model Y L officially launched: price, features, and more
Adding some support to the thighs can help reduce pressure on the lower back and hips, and distribute weight more evenly, taking stress off pressure points.
It can also contribute to better spinal alignment. They also have safety benefits, as some riders could have an improved seatbelt position thanks to the thighs being in this position.
Second-Row Mechanical Armrest
Tesla also added mechanical, one-touch armrests to the Model Y L’s second row, a nice and premium touch for the riders in the middle of the vehicle:
The Model Y’s second-row armrests are pretty satisfying to watch.
They’re touch operated, so they should be very convenient to use.pic.twitter.com/iGlGiJXGNR
— TESLARATI (@Teslarati) August 19, 2025
Add the additional space the Model Y L provides to riders, and it already gets more comfortable. However, the addition of the mechanical armrests gives a good option of comfort for those who are seated in the second row.
They can also be retracted with the touch of a button, allowing for those in the third row to exit the vehicle easily.
One con to the mechanical portion of these armrests is that it is another moving part, and, of course, that puts it at risk of having issues.
However, it is certainly more premium than a manual armrest, and the flashy carbuyers will appreciate this small but mighty addition.
-
Elon Musk2 weeks ago
Elon Musk confirms Tesla AI6 chip is Project Dojo’s successor
-
News2 weeks ago
Tesla Model Y L reportedly entered mass production in Giga Shanghai
-
Elon Musk2 weeks ago
Tesla CEO Elon Musk details massive FSD update set for September release
-
Cybertruck2 weeks ago
Tesla’s new upgrade makes the Cybertruck extra-terrestrial
-
News2 weeks ago
Elon Musk reaffirms Tesla Semi mass production in 2026
-
News2 weeks ago
Elon Musk explains why Tesla stepped back from Project Dojo
-
News2 weeks ago
Tesla Model 3 filings in China show interesting hardware addition
-
News2 weeks ago
Tesla Model Y L’s impressive specs surface in China’s recent MIIT filing