News
Tesla Model S Plaid gets drag race challenge from Ford Mustang Mach-E 1400
It appears that the newly-unveiled Tesla Model S Plaid has received its first challenge, and from a worthy competitor, no less. In a recent post on Twitter, Ford CEO Jim Farley responded positively to the idea of the Ford Mustang Mach-E 1400 — the automaker’s one-off monster— drag racing the Tesla Model S Plaid.
The suggestion came as a response to an initial post from the Ford CEO thanking Ford Performance for letting him take the 1400-hp monster out for a spin. Asked if the Mach-E 1400 would be drag racing the Tesla Model S Plaid “for bragging rights,” Farley responded with a quick “Good idea.” This, of course, practically sets the stage for one of the most exciting all-electric drag races to date.
I can confirm the all-electric #MustangMachE 1400 is an absolute machine. Thanks @FordPerformance for letting me test drive it. pic.twitter.com/NOgtk4ZOhO
— Jim Farley (@jimfarley98) June 12, 2021
Describing the Ford Mustang Mach-E 1400 as a monster is not an exaggeration. The one-off vehicle features a whopping seven electric motors, three in the front and four at the rear. These motors make a total of 1,400 hp (hence the vehicle’s name), and its giant wing and other aero components produce over 2,300 lbs of downforce at 160 mph. It’s a beast that’s designed for the track, as highlighted by its Brembo brakes with hydraulic handbrake.
Good idea
— Jim Farley (@jimfarley98) June 12, 2021
In comparison, the Tesla Model S Plaid may seem almost conservative specs-wise. The vehicle, which held its first deliveries to customers last week, features three electric motors that produce 1,020 hp. It’s also noticeably larger than the Mach-E 1400, due to it being a legitimate four-door family sedan that could transport a family and a healthy amount of luggage without any issues.
Broken record. #ModelSPlaid https://t.co/Sxv6Wwf2Og
— Franz von Holzhausen (@woodhaus2) June 13, 2021
But while the Mustang Mach-E 1400 holds an edge against the Model S Plaid when it comes to horsepower, the two vehicles’ quarter-mile times are actually very competitive. Tesla advertises the Model S Plaid to have a 0-60 mph time of 1.99 seconds that allows it to hit the quarter-mile in 9.23 seconds at 155 mph trap speed. Granted, these are manufacturer numbers, but noted car enthusiast Jay Leno did complete a quarter mile in the Model S Plaid in 9.247 seconds at 152.09 mph.
In comparison, the Ford Mustang Mach-E 1400 completed the quarter mile in 10.78 seconds at 134.5 mph during an exhibition drag race last April, as per a video posted by Ford Performance on YouTube. With this in mind, it appears that the Model S Plaid actually has a legitimate fighting chance against the one-off monster. The only question now, of course, is if Tesla CEO Elon Musk would accept the invitation.
Musk, after all, previously accepted a challenge from Ford against the Cybertruck in the past, only to have the invitation withdrawn soon after.
Watch the Ford Mustang Mach-E in action on the drag strip in the video below.
Do you have anything to share with the Teslarati Team? We’d love to hear from you, email us at tips@teslarati.com.
Elon Musk
SpaceX issues statement on Starship V3 Booster 18 anomaly
The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX has issued an initial statement about Starship Booster 18’s anomaly early Friday. The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX’s initial comment
As per SpaceX in a post on its official account on social media platform X, Booster 18 was undergoing gas system pressure tests when the anomaly happened. Despite the nature of the incident, the company emphasized that no propellant was loaded, no engines were installed, and personnel were kept at a safe distance from the booster, resulting in zero injuries.
“Booster 18 suffered an anomaly during gas system pressure testing that we were conducting in advance of structural proof testing. No propellant was on the vehicle, and engines were not yet installed. The teams need time to investigate before we are confident of the cause. No one was injured as we maintain a safe distance for personnel during this type of testing. The site remains clear and we are working plans to safely reenter the site,” SpaceX wrote in its post on X.
Incident and aftermath
Livestream footage from LabPadre showed Booster 18’s lower half crumpling around the liquid oxygen tank area at approximately 4:04 a.m. CT. Subsequent images posted by on-site observers revealed extensive deformation across the booster’s lower structure. Needless to say, spaceflight observers have noted that Booster 18 would likely be a complete loss due to its anomaly.
Booster 18 had rolled out only a day earlier and was one of the first vehicles in the Starship V3 program. The V3 series incorporates structural reinforcements and reliability upgrades intended to prepare Starship for rapid-reuse testing and eventual tower-catch operations. Elon Musk has been optimistic about Starship V3, previously noting on X that the spacecraft might be able to complete initial missions to Mars.
Investor's Corner
Tesla analyst maintains $500 PT, says FSD drives better than humans now
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Tesla (NASDAQ:TSLA) received fresh support from Piper Sandler this week after analysts toured the Fremont Factory and tested the company’s latest Full Self-Driving software. The firm reaffirmed its $500 price target, stating that FSD V14 delivered a notably smooth robotaxi demonstration and may already perform at levels comparable to, if not better than, average human drivers.
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Analysts highlight autonomy progress
During more than 75 minutes of focused discussions, analysts reportedly focused on FSD v14’s updates. Piper Sandler’s team pointed to meaningful strides in perception, object handling, and overall ride smoothness during the robotaxi demo.
The visit also included discussions on updates to Tesla’s in-house chip initiatives, its Optimus program, and the growth of the company’s battery storage business. Analysts noted that Tesla continues refining cost structures and capital expenditure expectations, which are key elements in future margin recovery, as noted in a Yahoo Finance report.
Analyst Alexander Potter noted that “we think FSD is a truly impressive product that is (probably) already better at driving than the average American.” This conclusion was strengthened by what he described as a “flawless robotaxi ride to the hotel.”
Street targets diverge on TSLA
While Piper Sandler stands by its $500 target, it is not the highest estimate on the Street. Wedbush, for one, has a $600 per share price target for TSLA stock.
Other institutions have also weighed in on TSLA stock as of late. HSBC reiterated a Reduce rating with a $131 target, citing a gap between earnings fundamentals and the company’s market value. By contrast, TD Cowen maintained a Buy rating and a $509 target, pointing to strong autonomous driving demonstrations in Austin and the pace of software-driven improvements.
Stifel analysts also lifted their price target for Tesla to $508 per share over the company’s ongoing robotaxi and FSD programs.
Elon Musk
SpaceX Starship Version 3 booster crumples in early testing
Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
SpaceX’s new Starship first-stage booster, Booster 18, suffered major damage early Friday during its first round of testing in Starbase, Texas, just one day after rolling out of the factory.
Based on videos of the incident, the lower section of the rocket booster appeared to crumple during a pressurization test. Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
Booster test failure
SpaceX began structural and propellant-system verification tests on Booster 18 Thursday night at the Massey’s Test Site, only a few miles from Starbase’s production facilities, as noted in an Ars Technica report. At 4:04 a.m. CT on Friday, a livestream from LabPadre Space captured the booster’s lower half experiencing a sudden destructive event around its liquid oxygen tank section. Post-incident images, shared on X by @StarshipGazer, showed notable deformation in the booster’s lower structure.
Neither SpaceX nor Elon Musk had commented as of Friday morning, but the vehicle’s condition suggests it is likely a complete loss. This is quite unfortunate, as Booster 18 is already part of the Starship V3 program, which includes design fixes and upgrades intended to improve reliability. While SpaceX maintains a rather rapid Starship production line in Starbase, Booster 18 was generally expected to validate the improvements implemented in the V3 program.
Tight deadlines
SpaceX needs Starship boosters and upper stages to begin demonstrating rapid reuse, tower catches, and early operational Starlink missions over the next two years. More critically, NASA’s Artemis program depends on an on-orbit refueling test in the second half of 2026, a requirement for the vehicle’s expected crewed lunar landing around 2028.
While SpaceX is known for diagnosing failures quickly and returning to testing at unmatched speed, losing the newest-generation booster at the very start of its campaign highlights the immense challenge involved in scaling Starship into a reliable, high-cadence launch system. SpaceX, however, is known for getting things done quickly, so it would not be a surprise if the company manages to figure out what happened to Booster 18 in the near future.