Connect with us

News

Jeep shows off the Magneto, its Wrangler EV prototype

Credit: Jeep

Published

on

Jeep recently showed off its new EV prototypes based on the Jeep Wrangler, and the prototypes are called the Magneto and Magneto 2.0.

According to Motor Trend, Jeep displayed its Wrangler EV prototypes at its safari launch event. The vehicles were named Magneto and Magneto 2.0 and built off existing gas-powered Jeep Wrangler architecture, employing much of the same bodywork, interior, and even 4×4 system. The brand plans a 2024 release date for the vehicle’s production version, but it will likely not be its first EV.

The two prototype vehicles showed off impressive and somewhat unique specifications. Starting with the Magneto, based on the two-door Jeep Wrangler, the vehicle featured a manual transmission and 2-speed transfer case, both taken off of the gas-powered variant of the Jeep Wrangler. The 4×4 system was then hooked up to a single motor in the engine bay, producing 285 horsepower and 273-pound-feet of torque. A 70kWh battery powered the motor.

The Magneto 2.0 offered a significant upgrade; using a similar two-door Jeep Wrangler body, Jeep upgraded the vehicle with an 800-volt architecture and a more powerful motor. The second iteration of the Jeep Wrangler Magneto produced 625 horsepower and 850-pound-feet of torque.

Advertisement

Jeep is certainly staying true to its roots with the Magneto prototypes, but their dedication to Jeep’s heritage technology will likely pose challenges for them in the future. First, using the manual transmission and transfer case means that the vehicle is far heavier and must work the motor harder to overcome inefficiencies by going through the system. The traditional 4×4 system also means that the vehicle is far more complex and contains far more failure points than a direct drive alternative.

Jeep didn’t comment on the possible advantages of their system, and it is certainly true that they would not be the only manufacturer introducing traditional transmission technology to EVs. The Porsche Taycan has a two-speed gearbox, for example. However, Jeep’s approach remains unique.

The second issue Jeep will face has more to do with design language. Due to the Jeep’s lackluster aerodynamics, the vehicle will work far harder to punch through the air rather than cut through it (though the tag line “don’t cut through the air, punch it” does have a certain ring to it). On top of this, the vehicle’s large grippy tires mean yet another inefficiency is added to the system.

Doing some basic napkin math, with the 70kWh battery, if the vehicle must overcome so many inefficiencies, it would be surprising to see it achieve more than 2 miles per kW, giving the prototype a hypothetical range of only 140 miles. That said, the Jeep Wrangler Magneto 2.0 featured a higher voltage architecture that could allow incredibly fast charging and a production model would likely fit a larger battery system if it were designed off a new, independent platform instead.

Advertisement

It has always been true that Jeep buyers are buying more than a vehicle; they are buying into an idea, a lifestyle, and even a not-so-secret wave to other Jeep drivers. However, with the introduction of EV technology, Jeep buyers may be compromising more than ever.

What do you think of the article? Do you have any comments, questions, or concerns? Shoot me an email at william@teslarati.com. You can also reach me on Twitter @WilliamWritin. If you have news tips, email us at tips@teslarati.com!

Will is an auto enthusiast, a gear head, and an EV enthusiast above all. From racing, to industry data, to the most advanced EV tech on earth, he now covers it at Teslarati.

Advertisement
Comments

News

Tesla is showing us that Cybercab mass production is well underway

Tesla’s Cybercab drives itself off the Gigafactory Texas line in a striking new production video.

Published

on

By

Tesla Cybercab production units rolling off the factory line in Gigafactory Texas (Credit: Tesla)

Tesla has provided a first look from inside a production Cybercab as it drove itself off the assembly line at Gigafactory Texas. The video footage, posted on X, opens on the factory floor with robotic arms and assembly equipment visible through the Cybercab windshield, and follows the car through a branded tunnel marked “Cybercab”, before autonomously navigating itself to a holding lot.

The first Cybercab rolled off the Giga Texas production line on February 17, 2026, with Musk writing on X, “Congratulations to the Tesla team on making the first production Cybercab.” April marked the official shift to volume production. The Giga Texas line is being prepared to produce hundreds of units per week, with 60 units already spotted on the Gigafactory campus earlier this month.


The Cybercab was first revealed publicly at Tesla’s “We, Robot” event in October 2024 at Warner Bros. Studios in Burbank, California, where 20 pre-production units gave attendees rides around the studio lot. Musk said he believed the average operating cost would be around $0.20 per mile, and that buyers would be able to purchase one for under $30,000. The two-seat design is deliberate. Musk noted that 90 percent of miles driven involve one or two people, making a compact two-passenger vehicle the most efficient configuration for a fleet-scale robotaxi. Eliminating rear seats also removes complexity and cost, supporting that sub-$30,000 target.

Tesla’s annual production goal is 2 million Cybercabs per year once several factories reach full design capacity. The Cybercab has no steering wheel, no pedals, and relies entirely on Tesla’s vision-based FSD system. What the video shows is the first evidence of that system working not as a demo, but as a production reality, driving itself off the line and into the world.

Advertisement
Continue Reading

Elon Musk

Elon Musk’s last manually driven Tesla will do something no other production car will do

Elon Musk confirmed the Roadster as Tesla’s last manually driven car, with a debut coming soon.

Published

on

By

Tesla Roadster driving along sunset cliff (Credit: Grok)

During Tesla’s Q1 2026 earnings call on April 22, Elon Musk made a brief but notable comment about the long-awaited next generation Roadster while describing Tesla’s future vehicle lineup. “Long term, the only manually driven car will be the new Tesla Roadster,” he said. “Speaking of which, we may be able to debut that in a month or so. It requires a lot of testing and validation before we can actually have a demo and not have something go wrong with the demo.”

That single statement is the entire Roadster update from yesterday’s call, and while it represents another timeline shift, it comes as no surprise with Tesla heads-down-at-work on the mass rollout of its Robotaxi service across US cities, and the industrial scale production of the humanoid Optimus.

The fact that Musk specifically framed the Roadster as the last manually driven Tesla is significant on its own. As the rest of the lineup moves toward full autonomy, the Roadster becomes something rare in the Tesla-sphere by keeping the driver in control. Driving enthusiasts who buy a $200,000 supercar are not doing so to be passengers. They want the physical connection to the road, the feel of acceleration under their own input, and the experience of controlling something with that level of performance. FSD, however capable it becomes, removes that entirely. The Roadster signals that Tesla understands this distinction and is building a car specifically for the people who consider driving itself the point.

Tesla isn’t joking about building Optimus at an industrial scale: Here we go

Advertisement

The specs for the Roadster Musk has teased over the years are genuinely unlike anything in production. The base model targets 0 to 60 mph in 1.9 seconds, a top speed above 250 mph, and up to 620 miles of range from a 200 kWh battery. The optional SpaceX package takes it further, rumored to add roughly ten cold gas thrusters operating at 10,000 psi, borrowed directly from Falcon 9 rocket technology. With thrusters, Musk has claimed 0 to 60 mph in as little as 1.1 seconds. In a 2021 Joe Rogan interview he went further, stating “I want it to hover. We got to figure out how to make it hover without killing people.” Tesla filed a patent for ground effect technology in August 2025, suggesting the hover concept has not been abandoned. The starting price remains $200,000, with the Founders Series requiring a $250,000 full deposit. Some reservation holders placed those deposits in 2017 and are approaching a full decade of waiting.

With production now targeted for 2027 or 2028 at the earliest, the Roadster remains Tesla’s most audacious promise and its longest-running delay. But if what Musk is testing lives up to even half of what he has described, the demo alone should be worth waiting for.

Continue Reading

Elon Musk

Tesla confirmed HW3 can’t do Unsupervised FSD but there’s more to the story

Tesla confirmed HW3 vehicles cannot run unsupervised FSD, replacing its free upgrade promise with a discounted trade-in.

Published

on

By

tesla autopilot

Tesla has officially confirmed that early vehicles with its Autopilot Hardware 3 (HW3) will not be capable of unsupervised Full Self-Driving, while extending a path forward for legacy owners through a discounted trade-in program. The announcement came by way of Elon Musk in today’s Tesla Q1 2026 earnings call.

The history here matters. HW3 launched in April 2019, and Tesla sold Full Self-Driving packages to owners on the understanding that the hardware was sufficient for full autonomy. Some owners paid between $8,000 and $15,000 for FSD during that period. For years, as FSD’s AI models grew more demanding, HW3 vehicles fell progressively further behind, eventually landing on FSD v12.6 in January 2025 while AI4 vehicles moved to v13 and then v14. When Musk acknowledged in January 2025 that HW3 simply could not reach unsupervised operation, and alluded to a difficult hardware retrofit.

Advertisement

The near-term offering is more concrete. Tesla’s head of Autopilot Ashok Elluswamy confirmed on today’s call that a V14-lite will be coming to HW3 vehicles in late June, bringing all the V14 features currently running on AI4 hardware. That is a meaningful software update for owners who have been frozen at v12.6 for over a year, and it represents genuine effort to keep older hardware relevant. Unsupervised FSD for vehicles is now targeted for Q4 2026 at the earliest, with Musk describing it as a gradual, geography-limited rollout.

For HW3 owners, the over-the-air V14-lite update is welcomed, and the discounted trade-in path at least acknowledges an old obligation. What happens next with the trade-in pricing will define how this chapter ultimately gets written. If Tesla prices the hardware path fairly, acknowledges what early adopters are owed, and delivers V14-lite on the June timeline it committed to today, it has a real opportunity to convert one of the longest-running sore subjects among early adopters into a loyalty story.

Continue Reading