Connect with us

News

Tesla Cybertrucks head out of Giga Texas, mystery structure revealed

Credit: Joe Tegtmeyer | YouTube

Published

on

A recent drone flyover of Tesla’s Gigafactory in Texas shows fewer Cybertrucks than last week, along with the host sharing some insights into what a recently spotted mystery structure could be.

In the video, shared by Giga Texas observer and drone pilot Joe Tegtmeyer on Monday, you can see fewer Cybertruck units around the site than last week, along with trucks in the outbound lot being loaded up with the vehicles to be shipped to customers. The video also details a number of other ongoing construction projects at the site, despite being a little foggy.

Credit: Joe Tegtmeyer | YouTube

Credit: Joe Tegtmeyer | YouTube

Credit: Joe Tegtmeyer | YouTube

Credit: Joe Tegtmeyer | YouTube

Credit: Joe Tegtmeyer | YouTube

One such project includes a mystery structure on the plant’s south end, which Tegtmeyer and others have been trying to identify to no avail over the past few weeks. However, Tegtmeyer and some of his viewers have now spotted a few permits indicating that it appears to be a structural platform for a cooling tower, which will be used on the South End extension of the factory.

Tegtmeyer also talks about two other major construction projects, including a baghouse air filtration system, and preparations for a major air ducting system above the body-in-white part of the factory’s server room. While he notes that there have been reports of a potential Dojo project at the site requiring substantial cooling efforts, Tegtmeyer says he hasn’t been able to confirm whether that’s what this is or not.

See the full video from Tegtmeyer’s YouTube channel below.

Advertisement

The Cybertrucks are seen being shipped out after the company had to pause deliveries and issue a recall last week, due to an issue with the accelerator pedal. The issue takes very little time for Tesla Service technicians to fix, only requiring the installation of a small rivet at the pedal’s base.

It also comes as Tesla continues to ramp up production of the Cybertruck at Giga Texas, with the company seemingly nearing a weekly production rate of 1,000 units. This milestone has also been predicated on Tesla’s ability to build 1,000 Cybertrucks’ worth of 4680 battery cells per week, an achievement which it reached in March.

CEO Elon Musk and Vice President of Vehicle Engineering Lars Moravy recently weighed in on both in-house 4680 cell production and its supplier relationships during the Q1 2024 earnings call:

Advertisement

“You know, we’re making good progress on that,” said Musk in response to a question on the cell’s in-house production ramp. “But I don’t think it’s super important for at least in the near term. As Lars said, we think it will exceed the competitiveness of suppliers by the end of this year. And then we’ll continue to improve.”

“I think it’s important to note also that like the [4680] ramp right now is relevant to the Cybertruck ramp,” Moravy added. “And so, like we’re not going to just randomly build 4680s unless we have a place to put them. And so, we’re going to make sure we’re prudent about that.”

“But we also have a lot of investments with all our cell suppliers and vendors. They’re great partners, and they’ve done great development work with us, and a lot of the advancements in technologies and chemistry, they’re also putting into their cells.”

Tesla shares new Cybertruck features: Diff locks, Baja Mode, CyberTent Mode, and more

Advertisement

What are your thoughts? Let me know at zach@teslarati.com, find me on X at @zacharyvisconti, or send us tips at tips@teslarati.com.

Zach is a renewable energy reporter who has been covering electric vehicles since 2020. He grew up in Fremont, California, and he currently lives in Colorado. His work has appeared in the Chicago Tribune, KRON4 San Francisco, FOX31 Denver, InsideEVs, CleanTechnica, and many other publications. When he isn't covering Tesla or other EV companies, you can find him writing and performing music, drinking a good cup of coffee, or hanging out with his cats, Banks and Freddie. Reach out at zach@teslarati.com, find him on X at @zacharyvisconti, or send us tips at tips@teslarati.com.

Advertisement
Comments

Elon Musk

The Starship V3 static fire everyone was waiting for just happened

SpaceX fired all 33 Raptor 3 engines on Starship V3 today clearing the path for Flight 12.

Published

on

By

SpaceX Starship V3 from Starbase, Texas on April 14, 2026

SpaceX is that much closer to launching their next-gen Starship after completing today’s full duration static fire of all 33 Raptor 3 engines out of Starbase, Texas. This marks the most powerful rocket engine test ever conducted and a direct signal that Flight 12, the maiden voyage of Starship V3, is imminent. SpaceX confirmed the test on X, posting that the full duration firing was completed ahead of the vehicle’s next flight test.

The road to today started on March 16, when Booster 19 completed a shorter 10-engine static fire, also at the newly constructed Pad 2. That test ended early due to a ground systems issue but confirmed all installed Raptor 3 engines started cleanly. Booster 19 returned to the Mega Bay, received its remaining 23 engines for a full complement of 33, and rolled back out this week for the complete test campaign. Musk confirmed earlier this month that Flight 12 is now 4 to 6 weeks away.

Countdown: America is going back to the Moon and SpaceX holds the key to what comes after

The numbers behind today’s test are genuinely hard to put in context. Each Raptor 3 engine produces roughly 280 tons of thrust, and with all 33 firing simultaneously, this generates approximately 9,240 tons of combined thrust, more than any rocket in history. For context, that’s enough thrust to lift the entire Empire State Building, and then some. V3 stands 408 feet tall and can carry over 100 tons to low Earth orbit in a fully reusable configuration. The V2 generation topped out at around 35 tons.

Advertisement

Historically, a successful full-duration static fire is the last major ground milestone before launch. SpaceX has followed this pattern with every Starship iteration since the program began in 2023.  Musk has been direct about the ambition behind all of it. “I am highly confident that the V3 design will achieve full reusability,” he wrote on X earlier this year. Full reusability of both stages is the foundation of SpaceX’s plan to make regular flights to the Moon and Mars economically viable. Today’s test brings that goal one significant step closer.


Starship V3 delivers on two most critical promises of full reusability and in-orbit refueling. The reusability case is straightforward, and one we have seen with Falcon 9 wherein the rocket can fly again within a day rather than building a new one for every mission. It’s the only economic model that makes frequent lunar cargo runs viable. The in-orbit refueling piece is less obvious but equally essential. To reach the Moon with enough payload, Starship requires roughly ten dedicated tanker flights to fuel up a propellant depot in low Earth orbit before it can even begin its journey to the lunar surface. That capability has never been demonstrated at scale, and Flight 12 is the first step toward proving it works. As Teslarati reported, NASA’s Artemis II crew completed a historic lunar flyby earlier this month, the first humans to travel beyond low Earth orbit since 1972, but getting astronauts to actually land and eventually supply a permanent Moon base requires a cargo pipeline that only a fully reusable, refuelable Starship V3 can deliver at the volume and cost NASA’s plans demand.

SpaceX Starship full duration static fire on April 14, 2026 from Starbase, Texas (Credit: SpaceX)

SpaceX Starship full duration static fire on April 14, 2026 from Starbase, Texas (Credit: SpaceX)

Continue Reading

News

Tesla Full Self-Driving shows stunning maneuver in Europe to silence skeptics

In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.

Published

on

Credit: Tesla

Tesla Full Self-Driving, fresh on the heels of its approval for operation on European roads for the first time, showed off a stunning maneuver that will certainly silence any skeptics on the continent.

Fresh off its approval in the Netherlands, Full Self-Driving is working toward a significant expansion into more parts of Europe.

In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.

In the first clip, a wide tractor occupied more than half the lane on a tight two-way road. Rather than braking abruptly or forcing a collision risk, FSD smoothly edged the vehicle onto the adjacent bike path—using the extra space with precision—before seamlessly returning to the lane once clear.

Advertisement

The second clip was equally demanding: while overtaking a group of cyclists, an oncoming car approached at speed.

FSD maintained a safe, minimal buffer to the cyclists while timing the pass perfectly, avoiding any swerve or hesitation that could unsettle passengers or other road users.

Advertisement

This maneuver highlights FSD’s advanced spatial reasoning and predictive planning. On roads often under three meters wide, with no room for error, the system calculated available clearance in real time, incorporated shoulder and path geometry, and executed a controlled deviation without compromising safety.

It treated the bike path as a legitimate extension of navigable space, something many drivers might hesitate to do, while respecting Dutch road norms and cyclist priority.

Such feats align closely with a growing library of impressive FSD maneuvers documented on camera worldwide.

In urban Amsterdam, for instance, FSD has navigated the world’s densest cyclist environments, weaving through hundreds of unpredictable bike movements on canal-side streets with tram tracks and pedestrians.

Advertisement

One uncut drive showed it yielding smoothly at crossings, overtaking where needed, and even handling a near-perfect auto-park in a tight residential spot, demonstrating the same low-speed precision seen in the rural clips.

Teslas using FSD have tackled turbo roundabouts in the Netherlands, complex multi-lane circles notorious for geometry challenges, merging confidently while yielding to traffic. Similar clips depict smooth handling of construction zones, emergency vehicle pull-overs, and gated parking barriers, where the car stops precisely, waits for clearance, and proceeds without driver input.

Collectively, these examples illustrate FSD’s evolution toward handling the unpredictable.

The rural Netherlands maneuvers aren’t isolated. Instead, they reflect a pattern of spatial awareness, cyclist deference, and traffic anticipation seen from city streets to highways.

Advertisement

As FSD continues refining through real-world data, videos like this one are certainly building a compelling case for its readiness on Europe’s varied roads.

Continue Reading

News

Tesla utilizes its ‘Rave Cave’ for new awesome safety feature

Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.

Published

on

Credit: Tesla | X

Tesla is utilizing its ‘Rave Cave’ for an awesome new safety feature that will arrive with the upcoming Spring Update for 2026.

Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.

Tesla added a Sync Lights feature that will strobe the accent strips with the beat of the music.

It is one of the most unique and one of the coolest non-functional features of a Tesla, as it does not improve the driving of the vehicle, but makes it a cool and personal addition to the interior.

Advertisement

However, Tesla is going to take it one step further, as the Rave Cave lights will now be used for blind spot recognition. This feature will be added as the Spring 2026 Update starts to roll out.

Advertisement

Tesla writes:

“Accent lights now turn red when an object is in your blind spot and your turn signal is engaged, or when an approaching object is detected while parked.”

This neat new safety feature will now increase the likelihood of a driver, who is operating their Tesla manually, of seeing the blind spot warnings that are currently available on the A pillar and on the center touchscreen.

These new alerts will now warn drivers of cross traffic as they back out of a parking space with little to no visibility of what is coming. It is a great new addition that will only increase the safety of the vehicles, while also utilizing something that is already installed in these specific Model 3 and Model Y units.

Advertisement

The Model 3 and Model Y were the central focus of the Spring 2026 Update, especially considering the fact that the Model S and Model X are basically gone, with only a few hundred units left. Additionally, Tesla included new Immersive Sound and Car Visualization for the Model 3 and Model Y specifically in this new update.

Continue Reading