News
Tesla building apparent Cybercab castings ahead of launch
Tesla has been producing what look like some Cybercab castings at Giga Texas, as spotted this week ahead of the vehicle’s upcoming launch.
Tesla’s Gigafactory in Texas is building what appear to be castings for the upcoming Cybercab, ahead of the vehicle’s launch and the highly anticipated debut of Unsupervised Full Self-Driving (FSD).
On Monday, Tesla Giga Texas site observer Joe Tegtmeyer shared photos on X of some unique castings out beside the factory. Notably, Tegtmeyer points out that the castings are quite different from those of the Model Y and Cybertruck, which are currently the only two vehicles being produced at the Austin, Texas plant—at least publicly.
Some viewers noted that the castings appear to have a similar shape to the Cybercab, along with being one single casting, compared to the two-piece Giga casts the factory produces for the Model Y and Cybertruck. The shape appears to be consistent with Tesla’s unboxed production process, which is expected to build single-piece castings and will be used for the upcoming Cybercab.
You can see Tegtmeyer’s photos of the castings below, in comparison with the Cybercab body and castings for the Model Y and Cybertruck.
Giga Texas castings April 21, 2025, compared to Cybercab

Credit: Joe Tegtmeyer | X

Credit: Joe Tegtmeyer | X
Giga Texas Model Y rear casting

Credit: Joe Tegtmeyer | X
Giga Texas Cybertruck castings

Credit: Joe Tegtmeyer | X
🎥: Our FULL first ride in the @Tesla Cybercab pic.twitter.com/6gR7OgKRCz
— TESLARATI (@Teslarati) October 11, 2024
READ MORE ON TESLA’S GIGA TEXAS: Tesla Cybercab no longer using chase vehicles in Giga Texas
In March, Tesla Vice President of Vehicle Engineering Lars Moravy confirmed in an interview with manufacturing expert Sandy Munro that Cybercab production would be starting prototype builds this summer, while the automaker is aiming to ramp for volume production in 2026.
While it isn’t summer yet, executives also confirmed in January that Cybercab production lines were already being prepared at Giga Texas, so it’s not unlikely that these castings are some of the upcoming vehicle’s first prototype builds.
The unboxed production process is also expected to revolutionize the automotive manufacturing industry, with CEO Elon Musk emphasizing how different the production line looks compared to its past vehicles during the Q1 2025 All-Hands meeting. Instead, Musk says the production line appears more like a high-speed consumer electronics line, and it’s expected to push Cybercab builds out in less than five seconds.
In a post on X earlier this month, Musk also reiterated that the Cybercab production line and the factory in general are essentially the products on their own, rather than just the cars themselves.
“The Tesla factory, especially our next gen Cybercab line, is the product,” Musk said. “That, autonomy and Optimus, are what matter.”
Tesla is also aiming to launch its first commercial robotaxi services around Austin, Texas this summer, along with launching its first iterations of Full Self-Driving (FSD) Unsupervised. The company is also holding its Q1 earnings call on Tuesday, during which executives are expected to address questions about the Cybercab and the upcoming commercial robotaxi service.
Tesla’s Giga Texas vehicles now drive themselves to outbound lot
News
Tesla aims to combat common Full Self-Driving problem with new patent
Tesla writes in the patent that its autonomous and semi-autonomous vehicles are heavily reliant on camera systems to navigate and interact with their environment.
Tesla is aiming to combat a common Full Self-Driving problem with a new patent.
One issue with Tesla’s vision-based approach is that sunlight glare can become a troublesome element of everyday travel. Full Self-Driving is certainly an amazing technology, but there are still things Tesla is aiming to figure out with its development.
Unfortunately, it is extremely difficult to get around this issue, and even humans need ways to combat it when they’re driving, as we commonly use sunglasses or sun visors to give us better visibility.
Cameras obviously do not have these ways to fight sunglare, but a new patent Tesla recently had published aims to fight this through a “glare shield.”
Tesla writes in the patent that its autonomous and semi-autonomous vehicles are heavily reliant on camera systems to navigate and interact with their environment.
The ability to see surroundings is crucial for accurate performance, and glare is one element of interference that has yet to be confronted.
Tesla described the patent, which will utilize “a textured surface composed of an array of micro-cones, or cone-shaped formations, which serve to scatter incident light in various directions, thereby reducing glare and improving camera vision.”
The patent was first spotted by Not a Tesla App.
The design of the micro-cones is the first element of the puzzle to fight the excess glare. The patent says they are “optimized in size, angle, and orientation to minimize Total Hemispherical Reflectance (THR) and reflection penalty, enhancing the camera’s ability to accurately interpret visual data.”
Additionally, there is an electromechanical system for dynamic orientation adjustment, which will allow the micro-cones to move based on the angle of external light sources.
This is not the only thing Tesla is mulling to resolve issues with sunlight glare, as it has also worked on two other ways to combat the problem. One thing the company has discussed is a direct photon count.
CEO Elon Musk said during the Q2 Earnings Call:
“We use an approach which is direct photon count. When you see a processed image, so the image that goes from the sort of photon counter — the silicon photon counter — that then goes through a digital signal processor or image signal processor, that’s normally what happens. And then the image that you see looks all washed out, because if you point the camera at the sun, the post-processing of the photon counting washes things out.”
Future Hardware iterations, like Hardware 5 and Hardware 6, could also integrate better solutions for the sunglare issue, such as neutral density filters or heated lenses, aiming to solve glare more effectively.
Elon Musk
Delaware Supreme Court reinstates Elon Musk’s 2018 Tesla CEO pay package
The unanimous decision criticized the prior total rescission as “improper and inequitable,” arguing that it left Musk uncompensated for six years of transformative leadership at Tesla.
The Delaware Supreme Court has overturned a lower court ruling, reinstating Elon Musk’s 2018 compensation package originally valued at $56 billion but now worth approximately $139 billion due to Tesla’s soaring stock price.
The unanimous decision criticized the prior total rescission as “improper and inequitable,” arguing that it left Musk uncompensated for six years of transformative leadership at Tesla. Musk quickly celebrated the outcome on X, stating that he felt “vindicated.” He also shared his gratitude to TSLA shareholders.
Delaware Supreme Court makes a decision
In a 49-page ruling Friday, the Delaware Supreme Court reversed Chancellor Kathaleen McCormick’s 2024 decision that voided the 2018 package over alleged board conflicts and inadequate shareholder disclosures. The high court acknowledged varying views on liability but agreed rescission was excessive, stating it “leaves Musk uncompensated for his time and efforts over a period of six years.”
The 2018 plan granted Musk options on about 304 million shares upon hitting aggressive milestones, all of which were achieved ahead of time. Shareholders overwhelmingly approved it initially in 2018 and ratified it once again in 2024 after the Delaware lower court struck it down. The case against Musk’s 2018 pay package was filed by plaintiff Richard Tornetta, who held just nine shares when the compensation plan was approved.
A hard-fought victory
As noted in a Reuters report, Tesla’s win avoids a potential $26 billion earnings hit from replacing the award at current prices. Tesla, now Texas-incorporated, had hedged with interim plans, including a November 2025 shareholder-approved package potentially worth $878 billion tied to Robotaxi and Optimus goals and other extremely aggressive operational milestones.
The saga surrounding Elon Musk’s 2018 pay package ultimately damaged Delaware’s corporate appeal, prompting a number of high-profile firms, such as Dropbox, Roblox, Trade Desk, and Coinbase, to follow Tesla’s exodus out of the state. What added more fuel to the issue was the fact that Tornetta’s legal team, following the lower court’s 2024 decision, demanded a fee request of more than $5.1 billion worth of TSLA stock, which was equal to an hourly rate of over $200,000.
Delaware Supreme Court Elon Musk 2018 Pay Package by Simon Alvarez
News
Tesla Cybercab tests are going on overdrive with production-ready units
Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the vehicle being reported across social media this week.
Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the autonomous two-seater being reported across social media this week. Based on videos of the vehicle that have been shared online, it appears that Cybercab tests are underway across multiple states.
Recent Cybercab sightings
Reports of Cybercab tests have ramped this week, with a vehicle that looked like a production-ready prototype being spotted at Apple’s Visitor Center in California. The vehicle in this sighting was interesting as it was equipped with a steering wheel. The vehicle also featured some changes to the design of its brake lights.
The Cybercab was also filmed testing at the Fremont factory’s test track, which also seemed to involve a vehicle that looked production-ready. This also seemed to be the case for a Cybercab that was spotted in Austin, Texas, which happened to be undergoing real-world tests. Overall, these sightings suggest that Cybercab testing is fully underway, and the vehicle is really moving towards production.
Production design all but finalized?
Recently, a near-production-ready Cybercab was showcased at Tesla’s Santana Row showroom in San Jose. The vehicle was equipped with frameless windows, dual windshield wipers, powered butterfly door struts, an extended front splitter, an updated lightbar, new wheel covers, and a license plate bracket. Interior updates include redesigned dash/door panels, refined seats with center cupholders, updated carpet, and what appeared to be improved legroom.
There seems to be a pretty good chance that the Cybercab’s design has been all but finalized, at least considering Elon Musk’s comments at the 2025 Annual Shareholder Meeting. During the event, Musk confirmed that the vehicle will enter production around April 2026, and its production targets will be quite ambitious.