Connect with us

News

Tesla prepares for full-throttle manufacturing of major product

Tesla has the second quarter of 2026 as its projected start date for Cybercab production. It also plans to launch Semi and Megapack 3 for “volume production” starting next year, which will also be two major contributors to the company.

Published

on

(Credit: Tesla North America | X)

Tesla is preparing for a full-throttle manufacturing effort of potentially its biggest product in company history, job postings on the company’s website show.

In preparation for its foray into fully autonomous travel, Tesla is gearing up for Cybercab manufacturing with 30 job postings, ranging from repair technicians to manufacturing specialists.

Elon Musk sets definitive Tesla Cybercab production date and puts a rumor to rest

The jobs are all located in Austin, Texas, where the company’s Gigafactory Texas facility is located. This is where Cybercab production is going to take place.

Tesla has made major strides in the Cybercab project over the past few months, including launching the vehicle on the Fremont Test Track in California and conducting crash testing at Gigafactory Texas.

All of these indicate the company is preparing for an imminent production effort of the vehicle, which, as Elon Musk said during last week’s Earnings Call, will be void of a steering wheel or pedals.

Tesla has the second quarter of 2026 as its projected start date for Cybercab production. It also plans to launch Semi and Megapack 3 for “volume production” starting next year, which will also be two major contributors to the company.

Advertisement
-
-

Musk spoke in great detail during the Earnings Call last week about Cybercab’s potential to change the grand picture of the automotive market, comparing other vehicles in the Tesla lineup to “a little bit of the horse-carriage thing.”

He said:

“That’s really a vehicle that’s optimized for full autonomy. It, in fact, does not have a steering wheel or pedals and is really an enduring optimization on minimizing cost per mile for fully considered cost per mile of operation. For our other vehicles, they still have a little bit of the horse carriage thing going on where, obviously, if you’ve got steering wheels and pedals and you’re designing a car that people might want to go very direct past acceleration and tight cornering, like high-performance cars, then you’re going to design a different car than one that is optimized for a comfortable ride and doesn’t expect to go past sort of 85 or 90 miles an hour.”

Cybercab production is imminent, given the job postings and the company’s proposed timeline for manufacturing to begin. Of course, there is always the potential that Tesla is late to the party, as it has been with other projects.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Elon Musk

Tesla CEO Elon Musk denies ridiculous Gigafactory Shanghai rumor

Published

on

(Credit: Tesla)

Tesla CEO Elon Musk took to his social media platform X on Thursday night to deny a ridiculous rumor regarding the sale of the company’s Chinese vehicle production plant, Gigafactory Shanghai.

On Thursday, the Wall Street Journal, citing sources familiar with the matter, claimed in a scathing new report that Tesla was exploring a potential sale of the entire China business in an effort to help bolster a potential merger between SpaceX and Tesla.

Musk immediately denied the rumor not once but twice, initially calling it “fake news,” and then calling it “absurdly fake news” in a separate post just a few moments later:

The original poster of the Wall Street Journal article that Musk saw deleted the initial post sharing the headline and the rumored sale of Tesla’s China business.

The report seemed absolutely and unequivocally false to begin with; Tesla’s business in China is among the most important pieces of the company’s business. Not only does the factory supply vehicles for the domestic market, but also for various other markets in Asia and Europe.

China is also one of the largest automotive markets in the world, and Tesla has performed well there despite the robust competition.

The speculation regarding a Tesla and SpaceX merger has started to gain steam this year as the space exploration company went public just a month ago. There has been speculation that Musk will bridge all of his companies under one “umbrella company,” and analysts believe this could happen before the end of the decade.

The Tesla and SpaceX merger everyone is talking about is quietly building

Advertisement
-
-

This is the latest iteration of Musk’s very evident war on mainstream media. Reports regarding any of Musk’s companies are quick to get the dreaded “false” or “fake news” response from the CEO when they are unfounded.

Continue Reading

Elon Musk

Tesla AI boss reveals how big Optimus is going to get

Tesla’s Optimus chief corrected himself on X, confirming a staggering 10 million robot production target.

Published

on

By

Tesla Optimus Gen 3 [Credit: Tesla]

Tesla’s Optimus program has a new number attached to it, after Ashok Elluswamy, the executive who has run the humanoid robot program since June 2025, posted a three word correction on X Thursday, “Correction, 10 million robots.”

The line clarifies the long term annual capacity Tesla is building toward its planned second Optimus production line at Gigafactory Texas, a figure Musk has cited repeatedly since last year’s shareholder meeting.

The scale is worth noting, because ten million robots a year would mean Tesla building more units annually than most countries sell in new cars. Tesla has framed this as a second line, not the first. The buildout is happening in two phases: a roughly one million unit per year line inside Tesla’s Fremont factory, installed on the floor space vacated when Model S and Model X production ended earlier this year, and a much larger dedicated facility under construction at Giga Texas that broke ground on its first steel structure in May. That Texas facility is the one Elluswamy’s correction refers to, and is expected to reach volume production sometime in 2027.

Tesla Optimus project fires up as Musk sees production line progress

Elluswamy took over Optimus from Milan Kovac last summer and has spent the months since talking up the program’s trajectory. Elon Musk has also floated the ten million figure at Tesla’s 2025 shareholder meeting.

Advertisement
-
-

Ending Model S and Model X production to make room for the first Optimus line was one of the more consequential manufacturing decisions in the company’s recent history, retiring two flagship vehicles in favor of a robot that has yet to enter mass production. Musk has previously estimated per unit production costs at $20,000 to $25,000 once Tesla reaches a million units a year, though he hasn’t said what that cost looks like at ten times the volume.

Continue Reading

News

Autonomous vehicle red tape gets slashed by Trump Administration

Published

on

Credit: Zoox

The Trump Administration today made several key moves to help with the deployment of autonomous vehicles by cutting overreaching red tape that has stifled growth and innovation for years.

The moves, which were put forth by the National Highway Traffic Safety Administration (NHTSA), aim to grant temporary exemptions to at least one company currently, although that could expand in the coming months. Additionally, it will work with organizations to develop standards and a sound but efficient regulatory landscape.

Zoox is the only company mentioned explicitly by the Trump Administration in its press release announcing the new terms today. They will receive a temporary two-year exemption that will allow the commercial deployment of up to 2,500 vehicles annually for two years.

There is a potential exemption for Robomart, Inc., which “requests a temporary exemption from certain FMVSS No. 500 requirements for a low-speed vehicle operated by an ADS without a human driver onboard. NHTSA will publish a separate notice seeking public comment on its merits once the initial evaluation is complete,” the agency said.

Here are the five new terms that Secretary Sean Duffy has implemented through the NHTSA today:

  1. Allow Zoox to commercially deploy its robotaxis through a temporary exemption.
    This temporary exemption will allow the commercial deployment of up to 2,500 vehicles annually for two years, subject to an enhanced, adaptable oversight structure that can evolve as Zoox’s technology advances.
  2. Accelerate development of first-ever AV performance standards through a partnership with SAE Industry Technologies Consortia (ITC).
    This partnership will fund a three-year, $5 million “A2SCEND” consortium, bringing together experts to gather data and accelerate creation of the first-ever AV performance standards. This project will inform a single national standard for AV safety to eliminate the patchwork regulatory landscape that has stifled innovation for years.
  3. Publish an interim final rule that allows vehicles manufactured prior to an exemption to be eligible for a commercial deployment exemption.
    This rule will modernize the application process and improve access to exemptions for innovators, including AV developers, by granting the NHTSA Administrator the discretion to apply temporary exemptions to vehicles manufactured prior to the effective date of an exemption grant.
  4. Streamline the application process for Part 555 exemptions by updating guidance and soliciting feedback from the public.
    By updating the Part 555 exemption process—which allows automakers to temporarily sell a limited number of non-compliant vehicles, primarily to test new technologies—NHTSA is aiming to create a more flexible oversight structure for exemptions and summarize recent AV framework activities, including expanded exemption pathways, streamlined crash reporting, and ongoing efforts to modernize Federal Motor Vehicle Safety Standards (FMVSS).
  5. Establish a new Federal Docket for public feedback on NHTSA’s updated safe AV development and deployment guidance.
    NHTSA is updating its technical guidance for AVs for the first time since 2017—focusing on key safety areas like emergency responder interactions, safety management systems, remote assistance, and post-crash behavior to help the industry scale up driverless deployments safely.

Additionally, the NHTSA said it has modernized some safety standards by proposing updates to:

  • FMVSS 102 – Transmission shifting
  • FMVSS 103/104 – Windshield defrosting and wiping
  • FMVSS 110 – Tire placards
  • FMVSS 135 – Braking systems
  • FMVSS 101 – Controls and displays
  • FMVSS 108 – Vehicle lighting
  • FMVSS 111 – Mirrors and rearview display
  • FMVSS 126 – Electronic stability control systems
  • FMVSS 201/208 – Sun visors and warning labels

These changes aim to make the regulatory process for autonomous vehicles more streamlined and efficient, which could help the U.S. gain dominance over autonomous vehicle systems moving forward.

Continue Reading