Connect with us

News

Watch first responders rip apart a Tesla Model X (Video)

The Tesla Model X presents unique challenges for fire and rescue personnel. This video demonstrates how to access a damaged car safely to reach people who may be injured or trapped inside.

Published

on

A question came up during yesterday’s Q&A portion of the Tesla shareholder meeting about how firefighters and first responders can extricate passengers safely from a Tesla. CEO Elon Musk quickly asserted that the company has provided Emergency Responder Guides on its website that outlines steps on how first responders can tend to victims trapped within the vehicle.

The following video by Brook Archer of Advanced Extrications and Randall Welles, assistant chief of the Denver Fire Department, gives a never-before-seen look at the challenges firefighters may face when working around the Model X’s unique falcon wing doors, coupled with high strength steel and high voltage cables.

Both men seen in the video compliment Tesla Motors for working closely with the fire and rescue community to protect first responders from injury while working to save lives. Based on suggestions made to the company by first responders, the DC/DC converter in the Model X has been moved from the right front wheel wheel to the center of the firewall. The charging controller has also been relocated to inside the rear quarter panel on the driver’s side. Both changes make access easier and safer for rescue personnel.

Advertisement

The video shows the location of manual pull cords that will release the latches for the front trunk lid, read deck lid, and both falcon wing doors if no 12 volt power is available. But sometimes, more extreme measures need to be taken.

Tesla has employed high strength boron steel in the areas surrounding all doors, The video delineates precisely where it is used so rescuers can avoid it with their cutting tools. In the video, workers demonstrate how to completely remove a falcon wing door and the B pillar the supports the roof between it and the front door of the Model X.

After breaking the window in the falcon wing door, a hydraulic ram is used to sever the connection between the upper and lower segments of the door. Then an hydraulic shear can remove the top half of the door from its hinges and sever the B pillar entirely in order to extricate anyone who may be severely injured inside. Despite its high safety ratings and 10 air bags, the Model X is not an impregnable fortress. People can still be injured, sometimes critically, in extreme circumstances.

No one expects to be hurt while riding in a Tesla, but if the worst happens, rescue personnel will need proper training to access the inside of the vehicle quickly and safely to remove injured parties and rush them to the nearest medical treatment facility.

Advertisement

Source: Advanced Extrications via YouTube

"I write about technology and the coming zero emissions revolution."

Advertisement
Comments

Cybertruck

Tesla confirms date when new Cybertruck trim will go up in price

Tesla has officially revealed that this price will only be available until February 28, as the company has placed a banner atop the Design Configurator on its website reflecting this.

Published

on

Credit: Tesla

Tesla has confirmed the date when its newest Cybertruck trim level will increase in price, after CEO Elon Musk noted that the All-Wheel-Drive configuration of the all-electric pickup would only be priced at its near-bargain level for ten days.

Last week, Tesla launched the All-Wheel-Drive configuration of the Cybertruck. Priced at $59,990, the Cybertruck featured many excellent features and has seemingly brought some demand to the pickup, which has been underwhelming in terms of sales figures over the past couple of years.

Tesla launches new Cybertruck trim with more features than ever for a low price

When Tesla launched it, many fans and current owners mulled the possibility of ordering it. However,  Musk came out and said just hours after launching the pickup that Tesla would only keep it at the $59,990 price level for ten days.

Advertisement

What it would be priced at subsequently was totally dependent on how much demand Tesla felt for the new trim level, which is labeled as a “Dual Motor All-Wheel-Drive” configuration.

Tesla has officially revealed that this price will only be available until February 28, as the company has placed a banner atop the Design Configurator on its website reflecting this:

Advertisement

Many fans and owners have criticized Tesla’s decision to unveil a trim this way, and then price it at something, only to change that price a few days later based on how well it sells.

It seems the most ideal increase in price would be somewhere between $5,000 and $10,000, but it truly depends on how many orders Tesla sees for this new trim level. The next step up in configuration is the Premium All-Wheel-Drive, which is priced at $79,990.

Advertisement

The difference between the Dual Motor AWD Cybertruck and the Premium AWD configuration comes down to towing, interior quality, and general features. The base package is only capable of towing up to 7,500 pounds, while the Premium can handle 11,000 pounds. Additionally, the seats in the Premium build are Vegan Leather, while the base trim gets the textile seats.

It also has only 7 speakers compared to the 15 that the Premium trim has. Additionally, the base model does not have an adjustable ride height, although it does have a coil spring with an adaptive damping suspension package.

Continue Reading

Cybertruck

Tesla set to activate long-awaited Cybertruck feature

Tesla will officially activate the Active Noise Cancellation (ANC) feature on Cybertruck soon, as the company has officially added the feature to its list of features by trim on its website.

Published

on

Credit: Tesla

Tesla is set to activate a long-awaited Cybertruck feature, and no matter when you bought your all-electric pickup, it has the hardware capable of achieving what it is designed to do.

Tesla simply has to flip the switch, and it plans to do so in the near future.

Tesla will officially activate the Active Noise Cancellation (ANC) feature on Cybertruck soon, according to Not a Tesla App, as the company has officially added the feature to its list of features by trim on its website.

Tesla rolls out Active Road Noise Reduction for new Model S and Model X

Advertisement

The ANC feature suddenly appeared on the spec sheet for the Premium All-Wheel-Drive and Cyberbeast trims, which are the two configurations that have been delivered since November 2023.

However, those trims have both had the ANC disabled, and although they are found in the Model S and Model X, and are active in those vehicles, Tesla is planning to activate them.

In Tesla’s Service Toolbox, it wrote:

ANC software is not enabled on Cybertruck even though the hardware is installed.”

Advertisement

Tesla has utilized an ANC system in the Model S and Model X since 2021. The system uses microphones embedded in the front seat headrests to detect low-frequency road noise entering the cabin. It then generates anti-noise through phase-inverted sound waves to cancel out or reduce that noise, creating quieter zones, particularly around the vehicle’s front occupants.

The Model S and Model X utilize six microphones to achieve this noise cancellation, while the Cybertruck has just four.

Tesla Cybertruck Dual Motor AWD estimated delivery slips to early fall 2026

As previously mentioned, this will be activated through a software update, as the hardware is already available within Cybertruck and can simply be activated at Tesla’s leisure.

Advertisement

The delays in activating the system are likely due to Tesla Cybertruck’s unique design, which is unlike anything before. In the Model S and Model X, Tesla did not have to do too much, but the Cybertruck has heavier all-terrain tires and potentially issues from the aluminum castings that make up the vehicle’s chassis, which are probably presenting some challenges.

Unfortunately, this feature will not be available on the new Dual Motor All-Wheel-Drive configuration, which was released last week.

Continue Reading

News

Tesla Model S and X customization options begin to thin as their closure nears

Tesla’s Online Design Studio for both vehicles now shows the first color option to be listed as “Sold Out,” as Lunar Silver is officially no longer available for the Model S or Model X. This color is exclusive to these cars and not available on the Model S or Model X.

Published

on

Credit: Tesla

Tesla Model S and Model X customization options are beginning to thin for the first time as the closure of the two “sentimental” vehicles nears.

We are officially seeing the first options disappear as Tesla begins to work toward ending production of the two cars and the options that are available to those vehicles specifically.

Tesla’s Online Design Studio for both vehicles now shows the first color option to be listed as “Sold Out,” as Lunar Silver is officially no longer available for the Model S or Model X. This color is exclusive to these cars and not available on the Model S or Model X.

Tesla is making way for the Optimus humanoid robot project at the Fremont Factory, where the Model S and Model X are produced. The two cars are low-volume models and do not contribute more than a few percent to Tesla’s yearly delivery figures.

With CEO Elon Musk confirming that the Model S and Model X would officially be phased out at the end of the quarter, some of the options are being thinned out.

Advertisement

This is an expected move considering Tesla’s plans for the two vehicles, as it will make for an easier process of transitioning that portion of the Fremont plant to cater to Optimus manufacturing. Additionally, this is likely one of the least popular colors, and Tesla is choosing to only keep around what it is seeing routine demand for.

During the Q4 Earnings Call in January, Musk confirmed the end of the Model S and Model X:

“It is time to bring the Model S and Model X programs to an end with an honorable discharge. It is time to bring the S/X programs to an end. It’s part of our overall shift to an autonomous future.”

Fremont will now build one million Optimus units per year as production is ramped.

Advertisement
Continue Reading