Connect with us

News

Faraday Future adds former Ferrari executive Marco Mattiacci to its A-list team

Published

on

Faraday Future Concept

Faraday Future will officially announce tomorrow that Marco Mattiacci is joining the company in an unspecified role. Mattiacci headed Ferrari operations in North America and Asia between 2006 and 2014. He is widely credited with helping Ferrari transition from a company that built road cars strictly as a sideline to fund its racing operations into a global player in the premium car segment. Mattiacci was named Automotive Executive of the Year Award in 2012 for his achievements as head of Ferrari’s North America operations.

Greatly admired within the company, he was tapped to run the company’s Formula One team in 2014. The team had been struggling for several years previously as rival Red Bull won the world championship four years in a row. After one year on the job, he was pushed overboard by Fiat boss Sergio Marchionne. According to Sky Sports, the irascible Marchionne sent Mattiaci packing with this less than enthusiastic send off. “We would also like to thank Marco Mattiacci for his service to Ferrari in the last 15 years and we wish him well in his future endeavors.” Don’t let the door hit you on the way out, Marco!

Faraday Future continues to add experienced talent to its executive ranks. It already has already hired senior leaders who previously worked at BMW, Ford, General Motors, and SpaceX. Nick Sampson, who oversees development of its automobiles, is a former Tesla executive who worked to make the Model S production ready.

The company continues to be extremely tight lipped about its plans. It is beginning construction of a new $1 billion factory in North Las Vegas and has recently entered into an agreement to lease additional factory space on Mare Island, 30 miles north of San Francisco. One thing it does not have at the moment is a CEO. There is speculation that Mattiacci may be the man to fill that position.

An unnamed source says Mattiacci is “a great asset for Faraday Future with regard to a global viewpoint on the automotive space, both in manufacturing and in representation in the two biggest markets that FF is looking toward — North America and China.”

Advertisement

Faraday Future is believed to have heavily disguised pre-production test mules operating on roads across America. It has hinted it will unveil a prototype vehicle before the end of this year. It is certainly well stocked with talent and is willing to spend freely. Will it be able to create what Elon Musk calls a “compelling car” to compete with the offerings from Tesla Motors? That is a question that no one has an answer to at the moment.

Source: Business Insider UK  Photo credit: Faraday Future

Advertisement
Comments

News

Tesla Gigafactory Texas builds its half millionth vehicle

The milestone was shared via Twitter/X by the official @Gigafactories account.

Published

on

Credit: Tesla Manufacturing/X

Tesla’s Gigafactory Texas has officially rolled out its 500,000th vehicle, marking a significant achievement in the factory’s history and reinforcing its role as a central hub in Tesla’s vehicle manufacturing network. 

The milestone was shared via Twitter/X by the official @Gigafactories account. “Congratulations to the Giga Texas team for building 500k vehicles,” the company’s X post read.

As could be seen in Tesla Manufacturing’s post, the Gigafactory Texas team celebrated the milestone by posting for a photograph with the facility’s half millionth unit, a white Tesla Model Y. The team held balloons that spelled “500K” on its commemorative photo. 

Giga Texas, located near Austin, has ramped its operations since its launch, producing Tesla’s Cybertruck and Model Y. Crossing the half-million vehicle mark solidifies the facility’s importance to Tesla’s overall operations, especially considering the fact that the Model Y is the company’s best-selling vehicle.

While Giga Texas is just producing the Model Y and the Cybertruck for now, the facility is also poised to produce the Cybercab. The Cybercab is expected to be Tesla’s highest volume vehicle, with Elon Musk estimating that the company would be producing about 2 million units of the autonomous two-seater per year. 

Advertisement

The Cybercab is unlike any vehicle that is currently produced today, and its production would be quite extraordinary. As per Elon Musk’s previous comments, the Cybercab’s manufacturing line would not look like an automotive production line at all. Instead, Musk noted that the Cybercab’s line in Gigafactory Texas would resemble a high-speed consumer electronics line instead.

“We do want to scale up production to new heights obviously with the Cybercab. Cybercab is not just revolutionary car design. It’s also a revolutionary manufacturing process. So I guess we probably don’t talk about that enough, but if you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line,” Musk previously stated.

Continue Reading

News

Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized

Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier.

Published

on

Credit: Tesla

Tesla might have all but finalized the design for its Optimus V3 humanoid robot, at least if rumors from China prove accurate. As per recent reports, Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier, with deliveries expected sometime in the first quarter of 2026.

The volume of orders suggested by the reports from China suggests that the components will not just be used for Optimus prototypes.

The rumor

As noted in a report from Sina News, media outlets across China have recently reported that Tesla has placed a $685 million (5 billion RMB) order for linear actuators from Sanhua Intelligent Controls. The components will reportedly be used for the production of Optimus, which will likely be mass-produced in its V3 iteration. The reports claimed that the delivery of the actuators will likely start sometime in the first quarter of 2026. 

Industry watchers have estimated that such a volume would be enough for about 180,000 Optimus robots. This suggests that while Tesla might not be able to start the initial production of its humanoid robots this year, the electric vehicle maker might be able to hit the ground running with its Optimus production next year. And as hinted at by Elon Musk’s comments on X, Tesla seems to be preparing to produce Optimus V3 en masse.

https://twitter.com/tslaming/status/1978311791890645146

Company comments

The reports of Tesla’s alleged actuator orders have resulted in Sanhua Intelligent Controls’ stock rising. Interestingly enough, a Tesla China representative has stated that “no official information about this order that could be disseminated externally.” A representative from Sanhua, on the other hand, simply stated that the company’s robotics business is progressing smoothly, but they could not comment on market rumors. 

Advertisement

While these reports are rumors for now, there are some optimistic hints that Tesla might have all but finalized the design for Optimus V3, and the company might be looking to start the robot’s production. For one, Sanhua is already a Tesla supplier, providing components for the company’s electric cars. A report from The Information also alleged that Tesla is no longer looking to produce 5,000 Optimus robots in 2025. This was reportedly due to challenges in the robot’s hands.

If Tesla is really starting to order large volumes of components for Optimus’ production, it would suggest that the company might have overcome the challenges it was facing with the humanoid robot earlier this year. It would then not be farfetched if Tesla were able to start the initial production of Optimus V3 next year.

Continue Reading

News

Tesla eyes two new states for Robotaxi

Published

on

Credit: @TerrapinTerpene/X

Tesla has officially shown that it is eyeing two new states for Robotaxi operation in the U.S., as it hopes to add the new areas to its ever-growing list of places where the suite is either active or in the testing phase.

Tesla first launched its Robotaxi suite in Austin, Texas, in late June. It expanded the suite to the San Francisco Bay Area just a month later. Since then, it has not launched any public rides in any other states, but it has gained several approvals for early testing.

Tesla officially launches Robotaxi service with no driver

In preparation for operation in new states, Tesla routinely lists job postings on its Careers website, which helps align potential employees with opportunities ahead of regulatory approvals. This is a strategy that allows Tesla to start operations immediately upon licensing for testing.

Tesla started hiring Vehicle Operators for Autopilot in Arizona and Nevada months before the company gained any sort of approvals from state governments for Robotaxi. However, those approvals eventually came in the form of testing licenses, which allow the company to perform validation ahead of its public launch.

Tesla begins validating Robotaxi in a new area, hinting at expansion

Now, Tesla has posted job listings for Vehicle Operators for Autopilot in two new states: Colorado and Illinois. The Colorado job listing is located in Aurora, a suburb of Denver. Tesla is looking for Robotaxi operators in Chicago as well.

These postings hint toward Tesla’s continuing efforts to expand Robotaxi to new places. Earlier this year, CEO Elon Musk said the company would like to have Robotaxi available to at least half of the U.S. population.

It has expanded significantly since its initial launch in late June, but it is still a far way off from where Tesla would like it to be by year’s end.

So far, Tesla has job listings for Autopilot Vehicle Operators in Arizona, California, Texas, Florida, Colorado, Nevada, and Illinois.

Continue Reading

Trending