Connect with us

News

Elon Musk shows off Boring Co. machine deep inside tunnel project

Published

on

Elon Musk recently expressed his affection towards The Boring Co.’s TBM on social media, posing beside his tunnel-making machine and captioning his post with a line from musician Dan Hill’s 1970’s classic soft rock song, “Sometimes When We Touch.”

The SpaceX and Tesla CEO posted the lighthearted image early Saturday on his Instagram page. According to Musk, the photograph was taken inside a hole that The Boring Co. was currently digging. Using some classic Elon Musk humor, the serial tech entrepreneur used the lyrics of Dan Hill’s smash hit to describe his feelings towards the tunnel boring machine.

“Deep in the hole with my boring machine. Sometimes when we touch, the honesty’s too much…”

Based on the image that Musk shared, it seems like the billionaire visionary was standing at the rear of one of The Boring Co.’s TBMs. The components of the machine at the left side of the photo, for one, look very similar to screw conveyors commonly found in tunnel boring machines. Screw conveyors are the component of industrial-grade diggers that transport extracted rocks and dirt from the machine’s cutter head to its rear, as noted in a RailSystem.net report.

https://www.instagram.com/p/Bf1fcw4g4Tx/?taken-by=elonmusk

Cheesy 1970’s soft rock songs aside, Elon Musk’s latest social media post about The Boring Company all but shows that the SpaceX and Tesla CEO is actively pursuing his vision of alleviating traffic on America’s roads through the use of underground tunnel systems. According to Musk, these tunnels could carry vehicles and Hyperloop pods from one designated point to another at speeds of up to 124 mph through the use of electric skates.

Advertisement

The Boring Company’s tunnels are quite unique in the way that they are designed to be smaller and more efficient than the usual tunnels dug by traditional tunnel boring machines. According to the tunneling startup’s official website, the tunnels it would dig will measure roughly 14 feet in diameter, vastly smaller than the usual 28 feet that conventional industrial-grade diggers create.

Due to the smaller tunnel size, the Boring Company would also be able to complete its operations at a more affordable price. Currently, the average price of tunnels dug by TBMs is roughly $1 billion per mile. Considering that its tunnels are up to 50% smaller, The Boring Co. expects to cut the costs of tunneling by a factor of four.

Apart from making tunneling cheaper, the Boring Company also aims to make the creation of tunnels more efficient. As we noted in a previous report, The Boring Co. is aiming to increase its tunneling machine’s power by upgrading the diggers’ cooling systems and changing their diesel motors to electric. Upgrades for the TBMs are also planned, which would enable the digger to erect tunnel support structures as the machine continues to dig.

As we noted in a previous report, the Boring Company recently received an early excavation permit from the local D.C. government to start digging at Lot 53 New York Avenue in Washington, D.C., a location that could become the first station in Elon Musk’s proposed NY-Phil-Balt-D.C. Hyperloop system.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

SpaceX Starship Flight 10: What to expect

SpaceX implemented hardware and operational changes aimed at improving Starship’s reliability.

Published

on

Credit: SpaceX

SpaceX is preparing to launch the tenth test flight of its Starship vehicle as early as Sunday, August 24, with the launch window opening at 6:30 p.m. CT. 

The mission follows investigations into anomalies from earlier flights, including the loss of Starship on its ninth test and a Ship 36 static fire issue. SpaceX has since implemented hardware and operational changes aimed at improving Starship’s reliability.

Booster landing burns and flight experiments

The upcoming Starship Flight 10 will expand Super Heavy’s flight envelope with multiple landing burn trials. Following stage separation, the booster will attempt a controlled flip and boostback burn before heading to an offshore splashdown in the Gulf of America. One of the three center engines typically used for landing will be intentionally disabled, allowing engineers to evaluate whether a backup engine can complete the maneuver, according to a post from SpaceX.

The booster will also transition to a two-engine configuration for the final phase, hovering briefly above the water before shutdown and drop. These experiments are designed to simulate off-nominal scenarios and generate real-world data on performance under varying conditions, while maximizing propellant use during ascent to enable heavier payloads.

Starship upper stage reentry tests

The Starship upper stage will attempt multiple in-space objectives, including deployment of eight Starlink simulators and a planned Raptor engine relight. SpaceX will also continue testing reentry systems with several modifications. A section of thermal protection tiles has been removed to expose vulnerable areas, while new metallic tile designs, including one with active cooling, will be trialed.

Advertisement

Catch fittings have been installed to evaluate their thermal and structural performance, and adjustments to the tile line will address hot spots observed on Flight 6. The reentry profile is expected to push the structural limits of Starship’s rear flaps at maximum entry pressure.

SpaceX says lessons from these tests are critical to refining the next-generation Starship and Super Heavy vehicles. With Starfactory production ramping in Texas and new launch infrastructure under development in Florida, the company is pushing to hit its goal of achieving a fully reusable orbital launch system.

Continue Reading

Elon Musk

Elon Musk takes aim at Bill Gates’ Microsoft with new AI venture “Macrohard”

It is quite an appropriate name for a company that’s designed to rival Microsoft.

Published

on

Credit: xAI/X

Elon Musk has set his sights on Microsoft with a new company called “Macrohard,” a software venture tied to his AI startup, xAI. 

Musk described the project as a “purely AI software company” that’s designed to generate hundreds of specialized coding and generative AI agents that could one day simulate products from companies like Microsoft entirely through artificial intelligence.

Macrohard‘s Purpose

Musk announced Macrohard on Friday, though xAI had already registered the trademark with the US Patent Office a few weeks ago, as noted in a PC Mag report. Interestingly enough, this is not the first time that Musk has mentioned such an initiative.

Just last month, he stated that xAI was “creating a multi-agent AI software company, where Grok spawns hundreds of specialized coding and image/video generation/understanding agents all working together and then emulates humans interacting with the software in virtual machines until the result is excellent.”

At the time, Musk stated that “This is a macro challenge and a hard problem with stiff competition,” hinting at the venture’s “Macrohard” moniker. A few years ago, Musk also posted “Macrohard >> Microsoft” on X. 

Advertisement

Powered by xAI and Colossus

Macrohard appears to be closely linked to xAI’s Colossus 2 supercomputer project in Memphis. Musk has confirmed plans to acquire millions of Nvidia GPUs, joining rivals such as OpenAI and Meta in a high-stakes race for AI computing power. Colossus is already one of the most powerful supercomputer clusters in the world, and it is still being expanded.

xAI is only a couple of years old, having been founded in March 2023. During its Engineering Open House event in San Francisco, Elon Musk highlighted that the company’s speed will be its primary competitive edge. “No SR-71 Blackbird was ever shot down and it only had one strategy: to accelerate,” Musk said.

Continue Reading

Elon Musk

Elon Musk confirms he’s still in wartime CEO mode

He is still locked in.

Published

on

Wcamp9, CC BY 4.0 , via Wikimedia Commons

Elon Musk tends to use social media platform X as his personal platform to express himself, so much so that critics tend to allege that the CEO is no longer serious about his numerous companies. 

As per Musk, he is still very much in wartime CEO mode, despite all the jokes and fun posts about Ani on X. 

Elon Musk leads several prolific companies, much more than the average CEO. And while Tesla is the only publicly traded entity that he currently leads, Musk is so visible that everyone across the internet pretty much has a strong opinion of him one way or another. For his longtime supporters and followers, however, what truly matters is if Musk is locked in.

Considering that Elon Musk’s feed on X has recently been filled with AI imagery, a good portion of which involve AI-rendered women, some X users have expressed concerns that the CEO may be losing focus once more. Musk responded to one such user by highlighting his very busy schedule and his numerous active projects. 

Needless to say, Elon Musk is still locked in. He is still in “wartime CEO” mode.

Advertisement

As per the CEO, even his recent AI posts about AI are “part of a broader vision and strategy.” He also highlighted that SpaceX’s Starship Flight 10 is launching in a few days, xAI’s Grok 5 is starting its training next month, and Tesla’s Autopilot V14 is also coming next month. As per Musk, “long-term strategy is compelling.”

Elon Musk’s comments are quite accurate. While he may seem to spend all his time on X, after all, he is very much still neck-deep in all his companies’ projects. There is a reason why Musk became known as a visionary, and a lot of it is because he really is intimately involved in all of his companies’ projects. 

Continue Reading

Trending