Connect with us

News

Tesla FSD Beta 10.13 gets the ‘two weeks’ treatment, Musk notes roundabout improvement

(Credit: Angel Wong/YouTube)

Published

on

Tesla’s next version of the Full Self-Driving Beta will be released in “two weeks,” a timeframe that is all too familiar for owners of the company’s all-electric vehicles. CEO Elon Musk stated FSD Beta version 10.13 will be released with notable improvements in terms of roundabout maneuverability.

Musk stated on Twitter last night that FSD Beta’s newest version would be released in two weeks, but it remains to be seen if Tesla can remain on this schedule. While the automaker’s executives have said in the past that new FSD Beta software updates will be released consistently in this timeframe, Tesla takes relatively no chances with its semi-autonomous suite. If the newest version is not ready for a release to the over 100,000 Beta members, it won’t be deployed.

Nevertheless, Musk believes Tesla’s newest version will make it out to the Beta fleet in two weeks.

It follows the delayed release of FSD Beta version 10.12, which was released in mid-May 2022. The improvements were deployed as Software Update 2022.12.3.10 and included several upgrades. Tesla said improved creeping for visibility, reduced instances of uncomfortable turns, smooth maneuvering in restricted spaces, more safety in turns with crossing traffic, and other upgrades.

Tesla FSD Beta V10.12 update going out to employees: Release Notes Update

With the v10.13 update, Musk said Tesla has been focusing on improving roundabout maneuvers, which have seemed to be a challenge with the FSD suite for several years. While recent versions of the FSD Beta have shown roundabout maneuvers are being met with increased confidence, they have stumped previous installments of the Full Self-Driving suite. However, improvements come with every mile driven thanks to the company’s Neural Network, which obtains information about road conditions and driver behaviors to become safer and more accurate with its movements in the future.

Advertisement
-

Tesla has implemented roundabout improvements in the FSD suite for several years. In June 2020, the company increased roundabout support, which supplemented the already-improving performance of Tesla vehicles. Roundabouts are extremely challenging and are most commonly found in Europe and the East Coast of the U.S., according to the Department of Transportation.

Tesla started adding drivers with a Safety Score of 93 and up to the FSD Beta program to increase the number of cars in the pool. It increases the data Tesla is obtaining for its self-driving project, which Musk believes will be completed by the end of the year.

I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.

Advertisement
-

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Elon Musk hints at Tesla Cybercab’s next market

Published

on

(Credit: Teslarati)

After launching in Austin, Texas, last week, Tesla is looking to expand the Cybercab to new parts of the United States in an effort that will see the driverless, steering wheel-less, and pedal-less vehicle chauffeur people around as part of the Robotaxi ride-hailing service.

However, the expansion will go far beyond the United States, and CEO Elon Musk revealed he hopes Europe will be the next market where Cybercab will be operational.

Musk has publicly expressed hope that Tesla’s Cybercab robotaxi will reach Europe in the near future.

On September 8, Tesla’s Chief Executive quoted a German rider who had just completed a trip in Austin, Texas, and wrote that he hoped the vehicle would not take years to arrive in Germany. Musk replied with a short but notable message: “Hopefully soon in Europe too.”

Advertisement
-

The comment arrived only days after Tesla opened Cybercab ride-hailing to the public in Austin. The two-seat vehicle has no steering wheel or pedals and relies entirely on Tesla’s Full Self-Driving software. Early passengers have described the rides as quiet, smooth, and more stylish than competing robotaxis such as Waymo.

Austin is currently the only city where members of the public can hail a Cybercab through Tesla’s Robotaxi app. The initial fleet is small; Texas registration records show only a few dozen of the purpose-built vehicles on the road.

Tesla set to open Cybercab rides to the public, with no steering wheel or pedals

Tesla has also been operating a larger number of conventional Model Y robotaxis in the same area, but the Cybercab itself represents the company’s first dedicated, controls-free taxi design.

Europe presents a different regulatory picture. The European Union does not permit manufacturers to self-certify vehicles the way Tesla did in the United States.

Type-approval rules and a small-series limit of 1,500 automated vehicles per type per year apply across the bloc.

Advertisement
-

Supervised Full Self-Driving has gained provisional approval in several member states through national recognition of Dutch certification, yet unsupervised robotaxi operation remains a separate and more distant step. Tesla has not announced a European launch city, date, or approval pathway for the Cybercab.

Musk himself has previously cautioned that the company does not control European regulators. In an earnings call earlier in 2026, he noted that even supervised FSD took an “immense amount of time” to clear and that unsupervised service would be “somewhat at the mercy of the governments in Europe and the EU.”

The latest social-media remark therefore functions more as an expression of intent than a timetable.

If the Cybercab eventually reaches European streets, it would mark a significant expansion of Tesla’s robotaxi ambitions beyond the United States. For now, the vehicle remains an Austin-only experience, and the gap between Musk’s hope and actual deployment will be decided by regulators rather than by engineering alone.

Continue Reading

News

Tesla Cybercab improvements are already on the minds of company engineers

Published

on

Credit: Tesla Europe & Middle East | X

Tesla Cybercab might have just rolled out to the public as it entered the company’s Robotaxi suite in Austin this past week. However, the vehicle might already be on its way to becoming even better, as the company is asking riders to describe what they’d like to see improved with the Cybercab.

Tesla sent a rider experience survey to Cybercab passengers only days after paid rides began in Austin. The questionnaire asks how satisfied riders were with the overall trip. Then it requests star ratings for availability and wait time, door functionality, vehicle touchscreen, mobile app experience, seat comfort, interior space, ride comfort, cleanliness, and cargo space.

A later section asks which features riders would most like to have and allows selection of up to three items from a list that includes heated seats, ventilated seats, fully reclining seats, a tray table, a wireless phone charger, a better sound system, and more storage. Respondents may also choose none of these or write in another idea. The survey closes with a recommendation score from zero to ten.

This rapid request for input illustrates Tesla’s habit of treating early users as collaborators rather than mere customers. The company has long refined vehicles through software updates and hardware changes informed by real-world use across its passenger cars.

Advertisement
-

Collecting structured opinions so soon after commercial service started shows the same mindset applied to a purpose-built autonomous taxi. The questions themselves reveal an openness to cabin changes even after the first vehicles reached public streets, which is no surprise.

Tesla has always hoped to cater a great experience to anyone in its vehicles, which is why so many fan-requested features have made it into its vehicles.

Replies already circulating online favor reclining seats, tray tables, wireless charging, improved audio, and extra room when seats fold back.

Tesla Cybercabs narrowly miss deadly Amazon cargo plane crash

Those preferences point toward comfort upgrades that Tesla can implement in later production batches or through cabin revisions. Because the Cybercab is designed around software first principles, many requested amenities can arrive faster than in traditional automakers.

Tesla’s willingness to survey riders immediately after launch therefore makes near-term cabin and experience improvements likely as the team reviews responses and iterates toward a more refined robotaxi people will choose daily.

Advertisement
-
Continue Reading

Cybertruck

Tesla Cybertruck engineer reveals new changes in ‘constantly evolving’ pickup

Published

on

Credit: Joe Tegtmeyer | YouTube

Tesla Cybertruck Lead Engineer Wes Morrill revealed the company has made several changes to the all-electric pickup, which he calls a “living thing, constantly evolving and improving.”

Cybertruck is manufactured at Tesla’s Gigafactory Texas just outside of Austin, and over the past few years, Tesla has continued to make small changes to the pickup to improve everything from cost, reliability, serviceablility, and manufacturability.

“The finish line isn’t getting to production. A product is a living thing, constantly evolving and improving,” Morrill added.

RELATED:

Tesla Cybertruck AWD is a steal at $60k, is it still at $75k? Full Review

Some of those changes are yet to be revealed, but perhaps the most notable one was the change Tesla made to the aero shield that sits underneath the truck. In the past, it was aluminum, but now the Cybertruck is using a self-reinforcing polypropylene.

Advertisement
-

Morrill said that the polypropylene is “stretched into fibers and then laminated into the form,” and is much more durable, much lighter, and significantly cheaper than aluminum when it is manufactured this way.

It also enabled some improvements in the geometry of the Cybertruck, improving the manufacturing around the bolts and edges, in addition to minor form changes. These all benefitted the Cybertruck in more ways than one: specifically with durability and improved drag.

Typically, Teslas are not necessarily identified by model year because these changes are fluid and occur when the company sees fit to implement them. It is not like other automotive companies, which usually make sweeping manufacturing changes when building a new model year.

Advertisement
-

Instead, Teslas are recognized by their “generation” or “era.” For example, those with a newer Model Y might refer to their car as a “Juniper.” This is the same with Model 3, as many refer to the new body style as the “Highland.”

Tesla’s manufacturing changes are proof of the company’s constant need to improve its products and move things forward with its vehicles. There is no need to drag one’s feet and wait until next year if the product can be made better right now, and that’s precisely what Tesla did with the Cybertruck.

Continue Reading