News
Tesla is able to display Semi-trucks, buses on screen in newest Autopilot update
Tesla’s V10 update gave owners everything from the ability to watch Netflix in your car, to halving the volume of chimes to keep your kids asleep. But not everything that was added has been talked about by Tesla owners on a wide spectrum.
Driving visualization was added with Software Update 2019.16 in May 2019. The addition allows for drivers to see the vehicles that surround them on their dash, eliminating the uncertainty of blind spots and adding an extra amount of confidence to those operating the car. Originally, Tesla vehicles were able to visualize the vehicles around them but had trouble differentiating certain types from others, most specifically: buses and semi-trucks.

However, owners are reporting that the V10 update has also improved the Driving Visualization feature and can now tell the difference between these two large vehicle types. This could come especially handy in instances where buses are pulled over to pick up pedestrians. Drivers will now be able to yield for people who may be walking near the bus. While most will be able to tell the difference in broad daylight, this could be considered a safety feature for both drivers and pedestrians when traveling at night.
Among the fixes with vehicle differentiation, the Driving Visualization also shows approaching vehicles as they are passing. The vehicle that is coming toward you will now be visualized up until the point where it actually passes you. Also available is the ability to pan out and rotate around your car, giving the driver a complete 360-degree view of the obstacles around them with unlimited possible angles of perspective.
It seems that Tesla has fixed the glitches of Driving Visualization. One of the most notorious was what members of the r/Teslamotors subreddit humorously called “Harlem Shake Mode,” where vehicles on the screen would twitch and collide with one another. This has been apparently resolved as there are no reports of this being a factor anymore.
The V10 Software Update rolled out for subscribers to Tesla’s Early Access Program (EAP) on September 15. Owners not apart of EAP whose vehicles are capable of Full-Self Driving (FSD) and have “Advanced Download” enabled got their first taste of the new software on the morning of September 26. Tesla CEO Elon Musk stated that all owners should have access to V10 “about a week” after September 26, when the company makes improvements based on initial user feedback.
Watch YouTube user Mother Frunker’s V10 update with an in-depth look at the additions to Driving Visualization:
News
Verizon, AT&T and T-Mobile are trying to shut Starlink out before FCC vote
AT&T, Verizon and T-Mobile want 290 MHz cut from an FCC satellite plan before Thursday.
AT&T, Verizon and T-Mobile are asking the Federal Communications Commission to pull nearly 300 MHz of spectrum out of a proposal that would let satellite companies like SpaceX offer cell service directly to ordinary phones. The request lands one day before the agency votes on it.
The FCC will vote Thursday, October 29, on a notice of proposed rulemaking that would make an additional 482 MHz available for direct to device service, expanding the number of eligible bands from five to 13, according to the FCC fact sheet. It would also scrap the rule requiring a satellite operator to lease spectrum from carriers, replacing it with a certification that the operator has coexistence agreements in place or holds the terrestrial license itself.
That second path matters for SpaceX. As Teslarati reported earlier this month, SpaceX agreed to buy Grain Management’s nationwide 800 MHz portfolio to turn Starlink Mobile into a full US carrier, adding to the spectrum it already bought from EchoStar.
The carriers want two bands removed, 2.5 GHz and 3.45 GHz, which make up 290 MHz of the 482 MHz on the table. Through industry group CTIA, they argued that about 300 million users depend on those bands and that satellite operations in them are not technically feasible. T-Mobile, which calls 2.5 GHz the foundation of its Ultra Capacity 5G network, said in its own filing that satellite interference could wipe out up to 96% of a cell site’s uplink coverage area and cut uplink speeds by 88% to 99%.
Executives from all three carriers met with FCC staff on October 20, and T-Mobile CEO Srini Gopalan met separately with FCC Chairman Brendan Carr. T-Mobile’s role stands out because it is still SpaceX’s US launch partner for Starlink Mobile. The three carriers have also teamed up on their own satellite joint venture to pool spectrum, a move widely seen as a response to Starlink.
SpaceX is asking for the opposite. In an October 23 filing after meetings with FCC staff and commissioners’ offices, the company asked regulators to add the 902 to 928 MHz band to the proposal. “Doing so now saves time later,” SpaceX wrote. The company also asked the FCC to modernize interference rules and align satellite deployment requirements with those for terrestrial cell networks, saying the goal is to let satellite and ground networks work together so Americans stay connected wherever they are.
The carriers have not been shy about how they view SpaceX as a competitor. On Verizon’s third quarter earnings call Monday, its chief executive said Starlink Mobile “just can’t compete with a terrestrial network” and estimated SpaceX would need four to six years and $300 billion to $500 billion to build a full US carrier network.
Thursday’s vote will not settle which bands survive. Adopting the notice opens a public comment period, with final rules to come later in the proceeding. The FCC already considered and rejected 2.5 GHz for satellite coverage once, in 2024. SpaceX also is not the only satellite player watching: the FCC approved Amazon’s $11.6 billion acquisition of Globalstar on October 27, giving its planned direct to device fleet its own mobile satellite spectrum.
News
Tesla Semi catches fire in California: what we know
A Tesla Semi caught fire in Hayward, California, which caused both directions of traffic to shut down for hours before being completely reopened early on Wednesday, the California Highway Patrol said.
The fire occurred just after 5:30 local time in Hayward on Tuesday, as the Semi caught fire in the southbound lanes of I-880 before CHP officials made the decision to shut down both lanes of traffic due to potential risks from hazardous chemical smoke.
There were no injuries reported.
🚨 A Tesla Semi reportedly caught fire, with California Highway Patrol confirming. The Semi was on I-880 SB
An estimated 5,000 to 7,000 semi-truck and large commercial vehicle fires occur on U.S. roadways every year
— TESLARATI (@Teslarati) October 28, 2026
The cause of the fire is currently unknown, as neither Tesla nor the CHP have not determined a cause.
However, some images taken before the Semi was completely destroyed by the fire seem to indicate this might have been an older unit, as it appears to be one of the designs that Tesla shipped as part of its pilot program, before revising it and starting mass production just a month ago.
@Tslachan From on of the videos looks like it’s an old Semi (not the refresh version that recently started production) https://t.co/KzwmR2kXow
— Area Under The Curve 🎗️ (@AreaUnderCurve) October 28, 2026
At the time of publication, CHP had not returned our request for a comment for additional details, including the Semi involved and any potential collaboration on an investigation between the CHP and Tesla. We will update this story when we hear back from them.
The southbound lanes were reopened at 3:30 a.m. on Wednesday, with the northbound lanes opening last night a few hours after the fire began. The CHP did state that the lithium batteries were “incredibly difficult to extinguish,” according to NBC Bay Area.
The truck’s driver said that the Semi caught fire, but he did not have an explanation.
An estimated 5,000 to 7,000 semi-truck and large commercial vehicle fires occur on U.S. roadways every year.
News
Tesla’s ‘Emergency Drive Away’ function gets its first use in the real world
Tesla’s launch of the “Emergency Drive Away” function a few months back offered owners a safe option to evacuate an area if they were in reasonable danger. The function finally got its first use in the real world, but it appears it was by mistake.
A video shared by u/Joshalander in the r/TeslaLounge subreddit recorded the instance from his vehicle and said the incident took place in Austin this past weekend during the city’s F1 Race.
“Was charging around 6 AM this past Sunday in Austin before heading to the F1 race and heard a pop. Looked over and saw the new emergency drive-away feature in action. Genuinely felt bad for the dude when he got out and realized what happened, since he looked exhausted and only seemed to half-read the prompts.”
🚨 Here’s the first look at Tesla’s Emergency Drive Away function in action:
Apparently this driver accidentally enabled it and drove forward; you can see the Supercharger pull with the car.
Tesla said previously this would cost up to $25k if not used properly. https://t.co/B4qQRrsO6B
— TESLARATI (@Teslarati) October 28, 2026
Emergency Drive Away unlatches the Supercharger connector from the vehicle, but still causes damage to both the car and the Supercharger. Tesla has said that it will cost up to $25,000 in repairs to have everything fixed back to normal.
Additionally, the company said that if it were not used in an emergency situation, the driver of the vehicle who activated the Emergency Drive Away feature would be responsible for all repair costs.
Tesla constitutes the following situations as reasonable justifications for activating the feature:
- You face an immediate threat to your life or personal safety.
- You must leave the area immediately.
- Exiting the vehicle is unsafe.
- Unplugging the charge connector would unreasonably delay your departure or expose you to a risk to your personal safety.
After using the feature, Tesla requires the driver to schedule Service so the car can be inspected.