Connect with us

News

Tesla’s Giga Shanghai formula is a trump card for the EV revolution

Tesla Gigafactory 3. (Credit: Tesla)

Published

on

In its Q4 2019 Update Letter, Tesla stated that it can comfortably deliver 500,000 vehicles in 2020, and a lot of this will be due to the Model 3 ramp in Gigafactory Shanghai and the Model Y ramp in Fremont. While Tesla’s revenue, production numbers, and cashflow were in the spotlight in the Q4 Update Letter, it was interesting to see the layout of the car factory in California next to the layout of Giga Shanghai’s production line. The flow of production in the two factories could not be any more different.

According to the electric carmaker, its Fremont factory now has a combined installed production capacity of 400,000 units for the Model 3 and Model Y. This number will hit 500,000 annually once additional machinery is installed in different production shops. Meanwhile, Tesla’s first car factory outside of the United States achieved a run rate of 3,000 vehicles per week earlier this month and is set to hit 150,000 units a year. The progress of Tesla in China is a painful truth for the electric car maker’s critics and naysayers as Giga Shanghai will play a crucial role in pushing the company towards sustained profitability.

Tesla Fremont Factory and Gigafactory Shanghai (Source: Tesla)

Tesla and its construction partner were able to turn the muddy Shanghai property into a functioning Gigafactory in record time after its initial groundbreaking ceremony. Tesla China was able to deliver its first Made-In-China Model 3s to customers exactly a year after. “Our pace of execution has also improved significantly, as we have incorporated many learnings from our experience launching Model 3 in the United States. As a result, we were able to start Model 3 production in Gigafactory Shanghai in less than 10 months from breaking ground and have already begun the production ramp for Model Y in Fremont,” Tesla wrote.

The design of the Giga Shanghai makes vehicle production look simple. It allows the smooth flow from stamping, body shop, paint shop, through the general assembly and rolls out for delivery. “We have already broken ground on the next phase of Gigafactory Shanghai. Given the popularity of the SUV vehicle segment, we are planning for Model Y capacity to be at least equivalent to Model 3 capacity,” Tesla wrote.

Learning from its experience in Fremont and seeing that it made the correct adjustments when it built the car factory in China, Tesla will likely be using a similar factory layout in Giga Berlin. This will probably result in a smooth ramp of the Model Y, which will be produced first in the European factory.

Tesla plans to start vehicle production in Giga Berlin by July next year. Just like its factory in China, Giga Berlin will aim to produce 150,000 vehicles on its initial phase of production, eventually ramping to 500,000 vehicles per year.

Tesla has come a long way over the years. With Giga Shanghai steadily ramping up to hit its true potential and Giga Berlin to help with production in the future, Tesla has a good chance to hit goals in terms of volume growth, capacity expansion, and cash generation. And when it does, Tesla would have its Gigafactory formula to thank.

A curious soul who keeps wondering how Elon Musk, Tesla, electric cars, and clean energy technologies will shape the future, or do we really need to escape to Mars.

Advertisement
Comments

Investor's Corner

Elon Musk drops a Thanksgiving hint about Starship’s biggest test yet

Elon Musk says Starship Flight 15 will try to catch the ship itself, a first.

Published

on

By

Elon Musk says SpaceX’s next Starship flight will try something nobody has done before, by catching the ship itself. Speaking to roughly 2,000 people at the X Takeover event at Giga Texas on Saturday, Musk said Flight 15 is about four to six weeks away and “probably launches a little bit before Thanksgiving, is my guess.”

That is a slip from earlier reporting, which had pointed to a launch as early as October 19. Musk explained why the date keeps moving. “We’re making a bunch of improvements to the rocket between every flight,” he said, adding that there are often hundreds, sometimes thousands, of small changes. This time the list is short, “but some of them take a fair bit of work and we’ve got to go inside the tank to make some of these changes.”

“We’re going to try to catch the ship, which is a super big deal,” Musk said. “If we do so, that’ll be the first time that there’s been full recovery of an orbital class rocket.” SpaceX has already caught the Super Heavy booster with the tower’s mechanical arms, and has talked about catching the ship since late 2025, but the upper stage has never been caught.

Musk also laid out what comes after. “The next big milestone would be to refly both the booster and the ship,” he said, describing a Flight 16 where “all parts of an orbital rocket are reflown.”

The reason SpaceX wants this comes down to cost and cadence. Every Starship ship so far has ended its flight in the ocean, and SpaceX expects most of those water landings to end in fireballs. A ship that returns to Starbase intact can be inspected and flown again. SpaceX’s IPO filing, says Starship V3 is designed to deliver 100 metric tons to orbit in a fully reusable configuration, that SpaceX aims to cut the cost to reach orbit by 99% or more versus the historical average, and that tower catches should allow “multiple launches per day.”

Advertisement
-

The payoff goes beyond cheaper launches. The next generation Starlink V3 satellites are too large for Falcon 9 and can only fly on Starship, which can carry up to 60 per flight. Flight 14 on September 28 deployed the first 26 of them after Starship reached orbit despite an early engine shutdown, as Teslarati reported. Musk blamed engine computer software, and said the heat shield “was extremely robust,” which he claimed in August had solved Starship’s biggest challenge.

NASA’s Moon plans depend on the same capability. NASA’s inspector general has described a lander mission that needs a propellant depot in low Earth orbit and more than 10 tanker flights, with SpaceX targeting one tanker launch every six days. That schedule only works if ships and boosters come back fast and fly again. Also, ship to ship propellant transfer has not been attempted yet.

One interesting hurdle yet to be explored is bringing the ship back to the launch site, with reentry over land, which will undoubtedly come with a lot of aviation safety reviews.

Continue Reading

Lifestyle

Tesla’s mirrorless Cybercab will give riders a visibility upgrade

Tesla engineer confirms Cybercab update letting riders pull up rear and repeater cameras on demand.

Published

on

By

Tesla Cybercab camera visibility for passengers (Credit: Dan Burkland via X)
Tesla Cybercab camera visibility for passengers (Credit: Dan Burkland via X)

Tesla is working on a Cybercab update that would let passengers pull up the vehicle’s rear and side cameras on demand, and the request came straight from a rider.

The exchange played out on X late Friday. Cybercab rider Dan Burkland shared photos of the two-seater’s cabin screen after an evening ride, praised the UI team’s work, and left one request: let riders open the rear and repeater cameras whenever they want, “especially for peace of mind.” Tesla UI software engineer Evan (@CarCoder) answered with two words: “In development.”

The idea fits a pattern Teslarati has tracked since public rides began. Days after paid Cybercab service opened in Austin, Tesla sent riders a survey that asked them to rate the touchscreen, the app and the cabin, and to pick the features they wanted most. We reported on that survey in September, and a camera view is the kind of small software change Tesla can push quickly if riders keep asking.

Advertisement
-

It also speaks to something unique about the vehicle. With no steering wheel, no pedals and no driver, passengers have no mirror to check and no way to see behind them. The hardware is clearly built for camera awareness, from the repeater cameras to the rear camera. Letting a passenger look through those same cameras would give a nervous first time rider a way to confirm what is around the car.

The timing matters because the fleet is growing fast. Tesla’s Robotaxi account said on Saturday that more than 300 Cybercabs are now serving Austin, an eightfold increase in 30 days, and Tesla AI chief Ashok Elluswamy named Dallas as the next city. More cars and more cities mean more people riding in a driverless vehicle for the first time, which is exactly when small trust features carry weight.

For now, the feature is confirmed only as in development. If Tesla follows its usual pattern with Cybercab software, riders could see it appear in a point release without any announcement, and Teslarati will watch for it.

Continue Reading

News

Tesla’s Cybercab fleet jumped 8x in a month, with Dallas up next

Tesla confirms its first official Cybercab fleet number as Austin scales fast and Dallas looms.

Published

on

By

Tesla says more than 300 Cybercabs are now serving Austin, the first time the company has put an official number on its active Cybercab fleet. The figure came from the Robotaxi account on X on Saturday, which wrote that one month after launch the service had “scaled to 300+ Cybercabs serving Austin – an 8x increase in 30 days.”

Ashok Elluswamy, Tesla’s head of AI software, quoted the post with a line that carried the bigger news. “Two years since the 10/10 Cybercab WeRobot event, the cabs are everywhere in Austin now. Dallas soon,” he wrote. It is the first time Tesla has named the next city for public Cybercab rides.

Tesla opened Cybercab rides to the public in Austin on September 4, as Teslarati reported, a day after an invite only launch event. The ramp since then has been steep. Our September 28 report had the fleet at well over 100 units after availability jumped from 58 to 125 in a single week. On Thursday, Tesla added 150 Cybercabs to the Texas automated vehicle registry, lifting its registered count to 319 from 169. The first seven appeared on the registry on August 31.

RobotaxiTracker, a community site that counts vehicles from sightings and state records, listed 275 vehicles in unsupervised service in Austin on Saturday, 105 of them Cybercabs, which is well below Tesla’s figure. Tracker counts can lag official numbers, though Sawyer Merritt noted that Cybercab wait times in Austin stayed short on Saturday evening even with more than 2,000 fans in town for X Takeover.

Advertisement
-

Regulators are watching the rollout. NHTSA opened an audit query into Tesla’s certification that the Cybercab meets federal safety standards, and sworn answers are due October 30. Tesla reports third quarter earnings on October 21, which gives the company a natural venue to define its fleet numbers and put a date on Dallas.

Continue Reading