Connect with us

News

SpaceX eyes two Falcon 9 launches and a Starship hop in three days (Update: one day!)

All three of these SpaceX rockets could launch between August 29th and 31st. (Richard Angle; NASASpaceflight - bocachicagal)

Published

on

Update: In a surprise twist, SpaceX has confirmed plans to launch SAOCOM 1B, Starlink-11, and hop Starship SN6 in less than ten hours on August 30th.

Contingent upon a ULA Delta IV Heavy launch on August 29th, Starlink-11 is scheduled to lift off on a Falcon 9 rocket no earlier than (NET) 10:12 am EDT (UTC-4), followed by SAOCOM 1B on a separate Falcon 9 NET 7:18 pm EDT (UTC-4). Simultaneously, SpaceX is currently working towards a second full-scale Starship hop test between 8 am and 8 pm CDT (UTC-5) on Sunday, August 30th.

Pending an August 29th mission from competitor ULA, SpaceX aims to attempt two orbital Falcon 9 launches and a Starship hop test over the course of just a few days.

A United Launch Alliance (ULA) Delta IV Heavy rocket was originally scheduled to launch the secretive National Reconnaissance Office 44 (NROL-44) spy satellite on Wednesday before the customer requested a 24-hour delay and technical rocket bugs pushed the mission to no earlier than (NET) August 27th and now August 29th. Delta IV Heavy’s low cadence of one or two annual launches has traditionally made it hard for the rocket to launch on time, offering very few opportunities for the company to work the kinks out of the complex system.

Advertisement

ULA’s NROL-44 launch currently holds precedence over other missions scheduled around the same time, meaning that SpaceX has no choice but to delay its own launches every time the ULA mission slips. SpaceX has two launches currently in queue: Argentinian Earth observation satellite SAOCOM 1B was scheduled to launch NET 7:19 pm EDT (UTC-4) on August 28th, while SpaceX’s 11th Starlink v1.0 launch was expected to lift off NET 10:08 am EDIT (UTC-4) on August 30th. Simultaneously, a SpaceX Starship prototype is tracking towards its first short hop somewhere in between those orbital launches. ULA’s second NROL-44 delay has thrown both SpaceX launch dates somewhat up in the air, however.

SpaceX encapsulated SAOCOM 1B in Falcon 9’s payload fairing earlier this month. (CONAE)

Starship SN6 Flight 1

Recent delays to SpaceX’s East Coast launches have pushed the company’s second full-scale Starship hop test to the front of the line. Starship serial number 6 (SN6) is currently scheduled to attempt its first 150m (~500 ft) hop as early as Saturday, August 29th. Coming less than four weeks after Starship SN5 became the first full-scale prototype to successfully lift off (and land) on August 4th, a second successful hop – with an entirely different Raptor engine and Starship prototype – would be an extraordinary feat.

Meanwhile, SpaceX is simultaneously inspecting and repairing the hop-proven Starship SN5 prototype – most likely with the intention of flying the ship again in the near future. According to CEO Elon Musk, SpaceX’s current goal is to perform “several” fast-paced Starship hop tests to streamline the new rocket’s launch operations. The August 29th window for SN6’s 150m hop lasts from 8am to 8pm and the rocket could attempt to lift off as early as 10am to noon.

Starship SN6 completed a cryo proof test and Raptor static fire on August 16th and August 23rd. (LabPadre)

SAOCOM 1B

Sister to the SAOCOM 1A satellite SpaceX launched from California in October 2018, SAOCOM 1B is more or less identical. Notably, however, it will launch from Florida – the first polar launch planned from the US East Coast in half a century. The reason the United States effectively retired the Eastern polar launch corridor is a bizarre story of Cold War tensions gone awry but the gist is that SpaceX’s Falcon 9 rocket will ‘dogleg’ midflight, changing its trajectory to avoid overflying populated regions.

Originally scheduled to launch as early as March 30th, the Argentinian satellite has been relentlessly delayed by coronavirus-related restrictions and technical delays. SAOCOM 1B’s Falcon 9 booster was even swapped amidst the delays, switching from B1051 to B1059 as SpaceX strove to fill the gap in its manifest with internal Starlink missions. Now, NROL-44’s technical launch delays have pushed the Falcon 9 mission from August 27th to NET 7:19 pm EDT (UTC-4) on Sunday, August 30th.

SAOCOM 1B will be SpaceX’s first return-to-launch-site (RTLS) booster landing since March 2020.

Advertisement
Falcon 9 B1059 – now scheduled to launch SAOCOM 1B – last returned to port on June 16th after launching Starlink-8. (Richard Angle)

Starlink-11

Finally, prior to NROL-44’s 72-hour slip, SpaceX’s 11th Starlink v1.0 mission and 12th Starlink launch overall was scheduled NET Sunday, August 30th. ULA’s delays have added considerable uncertainty, at one point pushing Starlink-11 to a tentative September 1st NET before the launch date (rather oddly) slipped back into late-August. Assuming SpaceX still has to wait for ULA, the most likely alternative is August 31st, given that August 30th would necessitate two launches in less than ten hours.

SpaceX completed its first operational US military Falcon 9 launch with booster B1060 on June 30th. (Richard Angle)
B1060 completed its first recovery on July 4th. (Richard Angle)

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla Cybercab specs revealed: range, curb weight, range ratings, and more

Published

on

(Credit: Teslarati)

Tesla’s Cybercab has taken a significant step toward production with new technical details emerging from 2026 EPA certification documents.

The filings, which include a Certificate of Conformity issued in late May, provide the most comprehensive public look yet at the purpose-built autonomous vehicle designed for high-volume, low-cost ride-hailing operations.

At its core, the Cybercab is a front-wheel-drive electric vehicle powered by a single 163 kW (219 horsepower) AC permanent magnet motor. Despite its modest output, prioritizing efficiency and cost over neck-snapping acceleration, the vehicle boasts a strong power-to-weight ratio thanks to its lightweight curb weight of 3,113 pounds and a GVWR of 3,730 pounds.

It operates on a 326-volt electrical architecture with a compact ~48 kWh lithium-ion battery pack. The standout revelation is the vehicle’s exceptional efficiency, which Tesla has routinely flexed in the past.

EPA lab tests list an equivalent all-electric range of 418 miles combined and 375 miles on the highway. Tesla has previously targeted around 300 miles of real-world range, and analysts expect the final EPA-rated figure to land near 280-300 miles after adjustment factors.

At a certified 165 Wh/mi in earlier testing, the Cybercab is reportedly the most efficient EV ever produced, significantly outperforming vehicles like the Lucid Air Pure.

This efficiency stems from deliberate design choices tailored for robotaxi duty. The two-seater features a highly aerodynamic shape, minimal weight, which is aided by structural battery integration of what are likely 4680 cells, and no steering wheel or pedals in its fully autonomous configuration.

For ride-hailing fleets, where average trips are short, and can be just five or ten miles, the smaller battery enables faster charging cycles, lower material costs, and reduced vehicle price, a key to Tesla’s goal of a ~$30,000 production cost.

Implications for Autonomous Mobility

These specs underscore Tesla’s strategy: maximize utilization and minimize operating expenses. A ~48 kWh pack could support dozens of short rides per charge, with energy costs potentially dropping below 20 cents per mile at scale. Front-wheel drive simplifies manufacturing and maintenance compared to dual-motor AWD setups in passenger Teslas.

The 219 hp motor provides ample performance for urban and highway speeds without excess, addressing questions about why such power is needed in a “slow” autonomous vehicle. Quick merges and hill climbing still matter for safety and passenger comfort.

Production has already begun at Giga Texas, with EPA certification clearing the path for U.S. deployment. While unsupervised Full Self-Driving remains the critical hurdle, these details paint a compelling picture of a vehicle engineered from the ground up for the robotaxi future: affordable to build, cheap to run, and capable of delivering strong range on a fraction of the battery capacity found in today’s EVs.

As Tesla ramps toward volume output, the Cybercab could reshape urban transportation economics.

Continue Reading

News

Tesla Cybercab snags huge regulatory green light that readies it for public roads

Published

on

Credit: Tesla

Tesla Cybercab, the all-electric ride-hailing-geared vehicle void of a steering wheel and pedals, has achieved a significant regulatory milestone. The vehicle has officially secured an EPA Certificate of Conformity for the 2026 Cybercab, classifying it as a battery electric Zero Emission Vehicle (ZEV).

This certification confirms full compliance with federal Clean Air Act emission standards, paving the way for legal sales and operation across the United States.

A Certificate of Conformity (CoC) is a critical document issued by the U.S. Environmental Protection Agency (EPA) to vehicle manufacturers. It certifies that a specific class of vehicles meets all applicable federal emission requirements for the model year.

We have reported on several of them in the past, and it’s a good sign that a vehicle is close to being available to the public.

Every vehicle sold in the U.S. must carry this approval, which covers exhaust emissions, evaporative emissions, and refueling standards. For battery electric vehicles like the Cybercab, it verifies zero tailpipe emissions and compliance with stringent testing protocols. The certificate, issued and effective May 26, 2026, was part of the EPA’s recent bi-weekly upload, detailing the Cybercab’s evaporative/refueling family and exhaust compliance.

It also revealed some other very important information, as the Cybercab’s “Charge Depleting Range” was rated at just over 418 miles. This was for city driving, while the highway range depletion test revealed just over 375 miles of range:

This EPA approval is a foundational step for Tesla’s autonomous ambitions. While emission certification is standard for any new EV, it signals that the Cybercab is progressing through the full federal compliance process.

Tesla has already equipped prototypes with federal compliance stickers affirming adherence to safety, bumper, and theft-prevention standards via self-certification under FMVSS rules. This bypasses the traditional 2,500-vehicle exemption cap that previously constrained low-volume autonomous testing.

Production of the Cybercab ramped up at Giga Texas starting in early 2026, with volume targets aiming for hundreds of units per week and long-term ambitions of millions annually. The two-seater, steer-by-wire vehicle, lacking a steering wheel and pedals, features a sleek, minimalist design optimized for Robotaxi service.

Tesla Cybercab gets crazy change as mass production begins

Priced under $30,000 at unveiling, it promises operating costs as low as $0.20–$0.40 per mile once scaled. Tesla has routinely flexed it as one of the most efficient vehicles of all time.

Regulatory progress extends beyond the EPA. The NHTSA has streamlined approvals for control-free vehicles, benefiting the Cybercab. Tesla operates supervised and unsupervised Robotaxi services in Texas cities like Austin, Dallas, and Houston using its fleet. California recently updated rules for driverless operations, including enforcement mechanisms for violations. Additional state-by-state approvals will be needed for nationwide rollout.

This EPA green light reduces a key barrier, building confidence among regulators, partners, and investors.

It underscores Tesla’s strategy of designing the Cybercab from the ground up for full compliance rather than retrofitting existing platforms. Challenges remain in scaling unsupervised autonomy, mapping approvals, and public acceptance, but the certification marks tangible momentum toward transforming urban mobility.

With prototypes already testing on public roads and production accelerating, the Cybercab edges closer to redefining transportation. Tesla’s integrated approach—combining hardware simplicity, software prowess, and regulatory diligence—positions it uniquely in the robotaxi race.

Continue Reading

News

SpaceX soars with its first launch as a public company, marking a new era

Published

on

Credit: SpaceX

SpaceX executed its first Falcon 9 launch since going public on June 15, a routine yet symbolically powerful Starlink mission from Vandenberg Space Force Base in California.

Liftoff of the Falcon 9 booster B1093, on its 14th flight, occurred at approximately 8:34 a.m. PDT from Space Launch Complex 4E (SLC-4E), deploying 24 Starlink V2 Mini Optimized satellites into low-Earth orbit.

The first stage successfully landed on the droneship “Of Course I Still Love You” in the Pacific Ocean, underscoring the company’s unmatched reusability track record.

This mission comes just three days after SpaceX’s historic IPO on June 12, which shattered records as the largest ever. The company raised $75 billion by pricing shares at $135, with trading under ticker SPCX on Nasdaq opening at $150 and closing at $160.95—a 19 percent gain—valuing SpaceX at over $2.1 trillion.

The launch highlights the seamless transition from private innovator to public powerhouse. SpaceX, founded in 2002, has revolutionized access to space with over 650 Falcon 9 flights and a massive Starlink constellation now serving millions globally.

As a public company, it faces new pressures: quarterly earnings, shareholder scrutiny, and expectations to accelerate Starship development for Mars ambitions and deeper NASA partnerships. Yet the market response signals strong confidence in its dominance, as launch costs are slashed by 95 percent, rapid satellite deployment, and a backlog of government and commercial contracts.

SpaceX maintains bold advertising push for Starlink, contrasting Tesla’s minimalistic approach

Analysts view today’s flight as business as usual, but it carries extra weight. With shares volatile in early trading days, successful operations reassure investors that core capabilities remain unaffected by public status.

SpaceX now operates under heightened transparency, potentially unlocking capital for ambitious goals like Starship orbital tests and global broadband expansion.

Challenges loom, including regulatory hurdles for megaconstellations, competition in reusable rockets, and orbital debris concerns. Nevertheless, this morning’s flawless execution reinforces SpaceX’s trajectory.

As Musk often notes, the company’s mission—to make humanity multiplanetary—now aligns with Wall Street’s growth demands. The stars, it seems, are aligning for both.

Continue Reading