News
SpaceX Crew Dragon capsule christened ahead of operational astronaut launch debut
The long-standing tradition of astronauts naming the spacecraft that transports them safely to and from space continues ahead of SpaceX’s next crewed flight to the International Space Station (ISS).
Shortly after safely arriving in low Earth orbit during SpaceX’s Crew Dragon Demo-2 mission to the ISS under NASA’s Commercial Crew Program, NASA astronauts Bob Behnken and Doug Hurley revealed “Endeavour” to be the chosen name of their SpaceX Crew Dragon capsule. Prior to being named by its crew, the capsule had only been referred to by its internal build number, C206. The next Crew Dragon Capsule to visit the ISS, the Crew-1 mission C207 capsule, has been given the same treatment. Until now.
On Tuesday, September 29, during a full day of Crew-1 pre-mission media briefings, NASA astronaut and Commander of the Crew-1 mission, Mike Hopkins, revealed that “the Crew-1 Dragon capsule number 207 will henceforth be known by the call sign: Resilience.”
Hopkins explained that “I think all of us can agree that 2020 has been a challenging year; global pandemic, economic hardship, civil unrest, isolation. The name Resilience is really an honor of the SpaceX and the NASA teams.” He went on further to explain that the name was also chosen as a nod to all of those that have endured the difficulties, but continued to support the mission, “our families, our colleagues, our fellow citizens, our international partners, our leaders that have all showed those same characteristics through these difficult times.”
What’s in a name?
The naming of crewed spacecraft is a tradition that extends all the way back to NASA’s Mercury program. Alan Shepard, the first American in space in 1961, designated his spacecraft “Freedom 7” before its debut flight.
More notable names arose during NASA’s Apollo era of lunar exploration. With two spacecraft required for the missions to the Moon – a command module and a lunar lander – monikers were needed to distinguish between the two vehicles during radio communication. “Charlie Brown” and “Snoopy” were chosen for the spacecraft of the Apollo 10 mission. The characters of Charles Schultz’s “Peanuts” have since become synonymous with NASA.
In observance of the 50th anniversary of Apollo 10, an inflatable Snoopy balloon dressed in an orange astronaut suit premiered during the 2019 Macy’s Thanksgiving Day Parade in New York. It was a reoccurrence of the astronaut Snoopy balloon that originally debuted in 1969 celebrating Neil Armstrong and Buzz Aldrin’s famous walk on the Moon during NASA’s Apollo 11 mission.
New era of spaceflight, same traditions
Hurley and Behnken designated “Endeavour” for their dragonship as a way of honoring those before them. Both Behnken and Hurley both flew to the ISS for the first time as NASA astronauts on NASA’s space shuttle Endeavour.
After the tragic loss NASA’s space shuttle “Challenger” in 1986, NASA returned to flight with the newly christened space shuttle “Endeavour” in 1992. The name was chosen to fit in-family with the other space shuttle names designated after famous historical ships that set sail to explore the great unknown. Endeavour was named after a British Royal Navy research vessel designated for the lands of Australia and New Zealand in 1768.
The command module of Apollo 15 also shares the name. Commander David Scott once explained that the named “Endeavour” was chosen to recognize the heavy scientific emphasis of the Apollo 15 mission mirroring that of the British Royal Navy research vessel of the same name.
It seemed only fitting that the first crewed vehicle to return humans to the ISS from American soil after an absence of nine years receive the honorary name “Endeavour” as well.
Although the tradition of naming the spacecraft remains, the inspiration for those names has shifted. Dragonship “Resilience” is not the only spacecraft to launch from Earth in 2020 with a name defined by a characteristic. NASA’s Perseverance Mars rover launched earlier this year on its way to the Red Planet.
The name option of Perseverance was submitted, along with 28,000 other essay submissions, to be voted on by the general population. Perseverance was chosen by seventh-grader Alexander Mather. He believed the name fit in-family with the other Mars rovers currently occupying the Red Planet and that it was one of the most important characteristics missing from the line up of other inspirational names such as Sojourner, Spirit, Opportunity, and InSight.
When Mather submitted the name, he believed it to represent a quality possessed by humans. Throughout the year 2020, the definition of the name evolved to represent the wilfulness of human nature to endure and overcome the tumultuous year of 2020. As Mather explained “we, not as a nation, but as humans will not give up. The human race will always persevere into the future.”
Dragonship “Resilience” is sure to inspire just as many as its many predecessors. “Resilience” will be the very first spacecraft to complete an operational crewed mission to the ISS for NASA’s Commerical Crew Program. It will carry NASA astronauts Mike Hopkins, Victor Glover, and Shannon Walker along with Japan Aerospace Exploration astronaut Sôichi Noguchi to the ISS. Barring any further delays, the Crew-1 “Resilience” Dragon capsule is slated to blast off atop of a SpaceX Falcon 9 at 2:40 am (0640 UTC) from LC-39A at Kennedy Space Center, FL on October 31, 2020.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
News
Tesla removes Safety Monitors, begins fully autonomous Robotaxi testing
This development, in terms of the Robotaxi program, is massive. Tesla has been working incredibly hard to expand its fleet of Robotaxi vehicles to accommodate the considerable demand it has experienced for the platform.
Tesla has started Robotaxi testing in Austin, Texas, without any vehicle occupants, the company’s CEO Elon Musk confirmed on Sunday. Two Tesla Model Y Robotaxi units were spotted in Austin traveling on public roads with nobody in the car.
The testing phase begins just a week after Musk confirmed that Tesla would be removing Safety Monitors from its vehicles “within the next three weeks.” Tesla has been working to initiate driverless rides by the end of the year since the Robotaxi fleet was launched back in June.
Two units were spotted, with the first being seen from the side and clearly showing no human beings inside the cabin of the Model Y Robotaxi:
A Tesla without a driver was spotted traveling on public roads! pic.twitter.com/ZLbduf4cKa
— TESLARATI (@Teslarati) December 14, 2025
Another unit, which is the same color but was confirmed as a different vehicle, was spotted just a few moments later:
NEWS: A second Tesla Model Y Robotaxi running FSD Unsupervised has just been spotted driving itself on public roads in Austin, Texas, with no one in the front seats.
This is a different car from the one spotted earlier. They have different license plates.
h/t @Mandablorian https://t.co/5URYsUGyD0 pic.twitter.com/CIUi4mXi33
— Sawyer Merritt (@SawyerMerritt) December 14, 2025
The two units are traveling in the general vicinity of the South Congress and Dawson neighborhoods of downtown Austin. These are located on the southside of the city.
This development, in terms of the Robotaxi program, is massive. Tesla has been working incredibly hard to expand its fleet of Robotaxi vehicles to accommodate the considerable demand it has experienced for the platform.
However, the main focus of the Robotaxi program since its launch in the Summer was to remove Safety Monitors and initiate completely driverless rides. This effort is close to becoming a reality, and the efforts of the company are coming to fruition.
Testing is underway with no occupants in the car
— Elon Musk (@elonmusk) December 14, 2025
It is a drastic step in the company’s trek for self-driving technology, as it plans to expand it to passenger vehicles in the coming years. Tesla owners have plenty of experience with the Full Self-Driving suite, which is not fully autonomous, but is consistently ranked among the best-performing platforms in the world.
News
Tesla refines Full Self-Driving, latest update impresses where it last came up short
We were able to go out and test it pretty extensively on Saturday, and the changes Tesla made from the previous version were incredibly impressive, especially considering it seemed to excel where it last came up short.
Tesla released Full Self-Driving v14.2.1.25 on Friday night to Early Access Program (EAP) members. It came as a surprise, as it was paired with the release of the Holiday Update.
We were able to go out and test it pretty extensively on Saturday, and the changes Tesla made from the previous version were incredibly impressive, especially considering it seemed to excel where it last came up short.
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
With Tesla Full Self-Driving v14.2.1, there were some serious regressions. Speed Profiles were overtinkered with, causing some modes to behave in a strange manner. Hurry Mode was the most evident, as it refused to go more than 10 MPH over the speed limit on freeways.
It would routinely hold up traffic at this speed, and flipping it into Mad Max mode was sort of over the top. Hurry is what I use most frequently, and it had become somewhat unusable with v14.2.1.
It seemed as if Speed Profiles should be more associated with both passing and lane-changing frequency. Capping speeds does not help as it can impede the flow of traffic. When FSD travels at the speed of other traffic, it is much more effective and less disruptive.
With v14.2.1.25, there were three noticeable changes that improved its performance significantly: Speed Profile refinements, lane change confidence, and Speed Limit recognition.
🚨 Many of you asked us to test highway driving with Tesla Full Self-Driving v14.2.1.25. Here’s what we noticed:
✅ Speed Profiles are significantly improved. Hurry Mode is no longer capped at 10 MPH over the speed limit, and now travels with the flow of traffic. This is much… pic.twitter.com/48ZCGbW0JO
— TESLARATI (@Teslarati) December 13, 2025
Speed Profile Refinement
Speed Profiles have been significantly improved. Hurry Mode is no longer capped at 10 MPH over the speed limit and now travels with the flow of traffic. This is much more comfortable during highway operation, and I was not required to intervene at any point.
With v14.2.1, I was sometimes assisting it with lane changes, and felt it was in the wrong place at the wrong time more frequently than ever before.
However, this was one of the best-performing FSD versions in recent memory, and I really did not have any complaints on the highway. Speed, maneuvering, lane switching, routing, and aggressiveness were all perfect.
Lane Changes
v14.2.1 had a tendency to be a little more timid when changing lanes, which was sort of frustrating at times. When the car decides to change lanes and turn on its signal, it needs to pull the trigger and change lanes.
It also changed lanes at extremely unnecessary times, which was a real frustration.
There were no issues today on v14.2.1.25; lane changes were super confident, executed at the correct time, and in the correct fashion. It made good decisions on when to get into the right lane when proceeding toward its exit.
It was one of the first times in a while that I did not feel as if I needed to nudge it to change lanes. I was very impressed.
Speed Limit Recognition
So, this is a complex issue. With v14.2.1, there were many times when it would see a Speed Limit sign that was not meant for the car (one catered for tractor trailers, for example) or even a route sign, and it would incorrectly adjust the speed. It did this on the highway several times, mistaking a Route 30 sign for a 30 MPH sign, then beginning to decelerate from 55 MPH to 30 MPH on the highway.
This required an intervention. I also had an issue leaving a drive-thru Christmas lights display, where the owners of the private property had a 15 MPH sign posted nearly every 200 yards for about a mile and a half.
The car identified it as a 55 MPH sign and sped up significantly. This caused an intervention, and I had to drive manually.
It seems like FSD v14.2.1.25 is now less reliant on the signage (maybe because it was incorrectly labeling it) and more reliant on map data or the behavior of nearby traffic.
A good example was on the highway today: despite the car reading that Route 30 sign and the Speed Limit sign on the center screen reading 30 MPH, the car did not decelerate. It continued at the same speed, but I’m not sure if that’s because of traffic or map data:
🚨 We listened to and read a lot of you who had a complaint of Tesla Full Self-Driving v14.2.1 incorrectly reading Speed Limit signs
This appears to be resolved in v14.2.1.25.
Here’s a breakdown: pic.twitter.com/TEP03xrMbt
— TESLARATI (@Teslarati) December 13, 2025
A Lone Complaint
Tesla has said future updates will include parking improvements, and I’m really anxious for them, because parking is not great. I’ve had some real issues with it over the past couple of months.
Today was no different:
🚨 My lone complaint with my drive on Tesla FSD v14.2.1.25 was this strange parking instance.
FSD swung out wide to the left to pull into this spot and this is where it seemed to be stumped. I gave it about 10 seconds after the car just stopped moving for it to make some… https://t.co/ZEkhTHOihG pic.twitter.com/TRemXu5DLf
— TESLARATI (@Teslarati) December 13, 2025
Full Self-Driving v14.2.1.25 is really a massive improvement over past versions, and it seems apparent that Tesla took its time with fixing the bugs, especially with highway operation on v14.2.1.
News
Tesla hints at Starlink integration with recent patent
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
Tesla hinted at a potential Starlink internet terminal integration within its vehicles in a recent patent, which describes a vehicle roof assembly with integrated radio frequency (RF) transparency.
The patent, which is Pub. No U.S. 2025/0368267 describes a new vehicle roof that is made of RF-transparent polymer materials, allowing and “facilitating clear communication with external devices and satellites.”
Tesla believes that a new vehicle roof design, comprised of different materials than the standard metallic or glass elements used in cars today, would allow the company to integrate modern vehicular technologies, “particularly those requiring radio frequency transmission and reception.
Tesla has recently filed a US patent application on integrating RF transparent materials into the roof structure.
“facilitating clear communication with external devices and satellites”
Tesla fleet is getting @Starlink connectivity integration soon. LFG @Tesla @elonmusk… pic.twitter.com/bLa8YtPLd1
— Chansoo Byeon (@Chansoo) December 9, 2025
Instead of glass or metallic materials, Tesla says vehicles may benefit from high-strength polymer blends, such as Polycarbonate, Acrylonitrile Butadiene Styrene, or Acrylonitrile Styrene Acrylate.
These materials still provide ideal strength metrics for crashworthiness, stiffness for noise, vibration, and harshness control, and are compliant with head impact regulations.
They would also enable better performance with modern technologies, like internet terminals, which need an uninterrupted signal to satellites for maximum reception. Tesla writes in the patent:
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
One of the challenges Tesla seems to be aware of with this type of roof design is the fact that it will still have to enable safety and keep that at the forefront of the design. As you can see in the illustration above, Tesla plans to use four layers to increase safety and rigidity, while also combating noise and vibration.
It notes in the patent that disclosed examples still meet the safety requirements outlined in the Federal Motor Vehicle Safety Standards (FMVSS).
Starlink integrated directly into Tesla vehicles would be a considerable advantage for owners. It would come with a handful of distinct advantages.
Initially, the inclusion of Starlink would completely eliminate cellular dead zones, something that is an issue, especially in rural areas. Starlink would provide connectivity in these remote regions and would ensure uninterrupted service during road trips and off-grid adventures.
It could also be a critical addition for Robotaxi, as it is crucial to have solid and reliable connectivity for remote monitoring and fleet management.
Starlink’s growing constellation, thanks to SpaceX’s routine and frequent launch schedule, will provide secure, stable, and reliable internet connectivity for Tesla vehicles.
Although many owners have already mounted Starlink Mini dishes under their glass roofs for a similar experience, it may be integrated directly into Teslas in the coming years, either as an upgrade or a standard feature.
Tesla removes Safety Monitors, begins fully autonomous Robotaxi testing
Tesla refines Full Self-Driving, latest update impresses where it last came up short
