Several Cybertrucks have been spotted recently, both on public roads and at Tesla’s Austin, Texas Gigafactory. On Monday, manufacturing equipment seemingly labeled for use on the Cybertruck production line was seen being delivered to Giga Texas — along with more pre-production versions of the unique electric pickup.
Drone videographer Joe Tegtmeyer shared photos of the Cybertruck manufacturing equipment on X, which he saw being delivered on the back of a semi-truck. He later released a full video of his drone footage, including shots outside the factory and a handful of Cybertrucks.
The hardware appears to be a pair of pre-fabricated robotic assembly units that are marked for the Cybertruck. The container with the equipment is labeled “CT Zone X,” indicating that the units are destined for the Cybertruck production line.
Tegtmeyer also points out five Cybertrucks total around Giga Texas, including three at the facility’s crash testing site and two in the outbound lot.
18 September 2023 Giga Texas! Parts arrive marked for Cybertruck assembly line! 5 Cybertrucks on site today! 3 at the crash test facility and 2 in the outbound lot! More coming up in my video later today! pic.twitter.com/HxfzWzNuH9
— Joe Tegtmeyer 🚀 🤠🛸😎 (@JoeTegtmeyer) September 18, 2023
The news comes just a week after Tegtmeyer spotted two Cybertrucks outside of the Giga Texas crash lab, noting that Tesla was likely performing its own crash tests ahead of those from the National Highway Traffic Safety Administration (NHTSA). The Tesla Cybertruck still requires NHTSA crash testing and a Certificate of Conformity before it can officially be released.
Tesla built its first Cybertruck at Giga Texas in July, as the automaker posted on X. The automaker has since been building several pre-production versions of the Cybertruck before its official launch.
Last month, covered Cybertrucks were seen leaving Giga Texas in flocks prior to being spotted on several public roads. Since then, pre-production Cybertrucks have been seen at Tesla’s special 50,000th Supercharger in Roseville, California, in Hollister, California, on the Las Vegas strip, and in many other locations.
The assembly hardware arrived at Giga Texas after the Cybertruck surpassed two million reservations over the weekend, according to a Google Sheets tally monitoring reservation numbers and self-reported pre-orders. The reservation news left many questioning how long it would be before their reserved Cybertrucks were delivered.
Some think Tesla could begin initial Cybertruck deliveries as soon as October, while volume production is slated for 2024.
You can watch Tegtmeyer’s full drone video below, taken at Giga Texas on Monday.
Updated: Added link and embed from Tegtmeyer’s full drone video.
What are your thoughts? Let me know at zach@teslarati.com, find me on X at @zacharyvisconti, or send your tips to us at tips@teslarati.com.
News
Tesla Summer Update begins rolling out: a look at the new features
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
News
Tesla briefly offered this Robotaxi part for your personal car
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
News
Tesla Robotaxi gets sweeping but polarizing change
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.

