News
SpaceX moving fast on Mars rocket development, BFR tent spied with more tooling
Photos taken by Teslarati photographer Pauline Acalin have confirmed that SpaceX’s massive Mars rocket fabrication tooling has been hiding in plain sight at the company’s Port of San Pedro tent facility.
Spotted inside the temporary structure thanks to open flaps and a human desire for a breeze amidst the warm Los Angeles springtime, the main cylindrical component is truly vast – large enough that the eye almost glazes over it at first glance. Dwarfing the humans clambering about it, very rough estimates using knowledge of the tent’s reported area (20,000 square feet) and size comparisons with machinery blueprints suggest a diameter of around 8-10 meters (26-36 feet), loosely conforming to the expected 9m diameter of BFR, as of CEO Elon Musk’s IAC 2017 update. Recently, however, President Gwynne Shotwell showed off an updated Mars rocket video at TED2018 that led to Musk hinting that BFR may have grown slightly since then.
SpaceX’s massive BFR manufacturing tool peeked out from the company’s Port-side tent facility. (Pauline Acalin)
-
- SpaceX’s BFR tent and mandrel, caught on April 14th. (Pauline Acalin)
-
- Like, really big. (Pauline Acalin)
The massive cylindrical structure teased by Musk earlier this month is most likely a mandrel, a tool that can be spun on its horizontal axis to weave predetermined structures. In the case of the Mars rocket mandrel, it will likely be used to carefully wind dozens or hundreds of layers of carbon fiber (known as prepreg), interspersed with layers of laminate and various epoxies and resins. It’s also possible, however, that the massive tool is instead a multipurpose mold and autoclave, where the composite layers would be lain on the inside of the cylinder, allowed to set, and eventually sealed inside and heat/pressure treated.
Images of the machinery are fairly ambiguous: they show a structure that could have connection points one might find on an autoclave, as well as what appears to be a thick and well-insulated internal wall. However, the external skin appears to be a relatively thin sheet of metal, which would point more towards a traditional composite mandrel, where certain sheets could be removed or modified as needed to create desired shapes in the composite while it’s being formed, less risky than machining a completed segment.
-
- Just a casual line of car-sized steel segments hanging around outside the BFR tent. (Pauline Acalin)
-
- While unclear, these are likely sections of a layup or mold that will be used to form BFR’s more complex composite components. (Pauline Acalin)
-
- Shown is the forward fuselage of the 787 on a mandrel for composite weaving and layup.(Boeing)
Perhaps even more interesting, a number of massive metal structures were spotted just outside of the tent. While it is unclear what exactly their purpose was, is, or will be, it’s more likely than not that they are components of a carbon composite mold or layup structure meant to deal with fabrication of certain Mars rocket and spaceship components with complex curves, versus the relatively simple cylinders that BFR and BFS are largely comprised of. Still, precedents exist in large aerospace composite manufacturing for the fabrication of structures with complex curves, most notably the nose and front sections of airliners like Boeing’s 787.
Finally, it’s worth noting just how shockingly busy the BFR tent was on both April 13th and 14th, as well as the 8th (the first day Pauline visited the facility). With upwards of 40 cars parked at the tent, it’s blindingly clear that SpaceX is not simply using the tent as a temporary storage location – alongside the arrival of composite fabrication materials (prepreg sheets, epoxy, etc) from Airtech International, SpaceX undeniably intends to begin initial fabrication of the first BFR prototypes in this tent, although they will likely eventually move the activities to the Berth 240 Mars rocket factory. That’s certainly not a sentence I ever expected to write, but it is what it is.
-
- Airtech supplies arrive at the BFR tent on April 14. Airtech is a composites supplier with a branch located just miles away from Port of San Pedro. (Pauline Acalin)
-
- Lots of cars at the BFR tent. This also provides a sense of scale for the tent’s absolutely massive access flaps. (Pauline Acalin)
-
- April 2018. (Pauline Acalin)
SpaceX’s giant, temporary tent currently housing the company’s BFR/BFS fabrication tooling while their permanent facility awaits construction a couple miles away. #SpaceX #BFR pic.twitter.com/a8Tj6QLmUz
— Pauline Acalin (@w00ki33) April 15, 2018
-
-
Follow us for live updates, behind-the-scenes sneak peeks, and a sea of beautiful photos from our East and West coast photographers.
Teslarati – Instagram – Twitter
Tom Cross – Twitter
Pauline Acalin – Twitter
Eric Ralph – Twitter
-
Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.
As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.
Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:
New Animation Screen for 3/Y
Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.
The new animation screen on Model 3/Y with the 2026 Summer Update
Apparently color will also be customizable: pic.twitter.com/wSdwggtG3S
— TESLARATI (@Teslarati) July 27, 2026
-
Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.
Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.
Grok Improvements
Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:
@Tesla‘s AI assistant (Grok) with its new vehicle commands in action.
Set the climate, your destination and vehicle settings all in one go! pic.twitter.com/0bBTqaAk6G
— Not a Tesla App (@NotATeslaApp) July 28, 2026
You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.
-
This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.
Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.
Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.
This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.
However, this part has since been removed and is no longer visible on the EPC.
-
Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?
While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.
AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.
This could be the first hint of that’s where we are headed.
Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.
Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.
But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:
Tesla has finally turned off the blinker/turn signal noises in their Model Y Robotaxis.
This is a small update, but will definitely be noticeable for riders. It didn’t really make much sense to leave the turn signal sound on when it’s Unsupervised. pic.twitter.com/ITwx60PAMO
— Sawyer Merritt (@SawyerMerritt) July 27, 2026
However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.
-
Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.
I kind of like it being on, threw me off when riding with Zoox who has had it disabled
— Dan Burkland (@DBurkland) July 27, 2026
Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.
The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.
Tesla Summer Update begins rolling out: a look at the new features
Tesla briefly offered this Robotaxi part for your personal car
