

News
Tesla Semi accelerates with otherworldy speed and sound in new video
The days of swearing under one’s breath when one finds him/herself stuck behind a semitrailer may be coming to an end, at least to a point. With the Tesla Semi in the picture, faster, quieter cargo trucks will likely be the new norm. This was teased as much in a recent sighting of the Class 8 all-electric truck.
When the Tesla Semi was unveiled in late 2017, CEO Elon Musk made it a point to highlight that the vehicle’s performance would be quite unlike anything that’s on the road so far. Musk noted that the Semi would be able to accelerate to highway speed in about 20 seconds with a full load, which is nowhere near as fast as a regular Tesla like a Model 3, but way faster than a traditional diesel hauler.
This was shown recently in a short video of what appears to be a production Tesla Semi pulling a trailer and accelerating from a dead stop. The video of the vehicle was short, but one could see that its speed and power were remarkable. Interestingly enough, the Semi also had an otherworldly, futuristic sound while it was ripping ahead.
The Semi’s acceleration and performance have not really been discussed much, partly because Tesla critics have widely considered the Class 8 all-electric truck as a vehicle that would never be released. However, Tesla executives have confirmed that the Semi’s first deliveries to PepsiCo are indeed happening on the first of December.
The Tesla Semi’s first deliveries will likely be quite an event, with CEO Elon Musk stating during the third quarter earnings call that he would be in attendance when the EV maker hands over the first Semis to PepsiCo. Musk has also made it a point to highlight that the Semi would be a no-compromise vehicle, especially when it comes to cargo.
“We will begin ramping up production of the Tesla Semi, which is a heavy truck. That’s a Class 8 truck, no sacrifice to cargo capacity, 500-mile range. Just to be clear, 500 miles with the cargo. Yes, 500 miles with the cargo on level ground (not up). It’s excellent. But the point is, it’s a long-range truck and even with heavy cargo,” Musk said.
Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.
News
Tesla Gigafactory Texas builds its half millionth vehicle
The milestone was shared via Twitter/X by the official @Gigafactories account.

Tesla’s Gigafactory Texas has officially rolled out its 500,000th vehicle, marking a significant achievement in the factory’s history and reinforcing its role as a central hub in Tesla’s vehicle manufacturing network.
The milestone was shared via Twitter/X by the official @Gigafactories account. “Congratulations to the Giga Texas team for building 500k vehicles,” the company’s X post read.
As could be seen in Tesla Manufacturing’s post, the Gigafactory Texas team celebrated the milestone by posting for a photograph with the facility’s half millionth unit, a white Tesla Model Y. The team held balloons that spelled “500K” on its commemorative photo.
Giga Texas, located near Austin, has ramped its operations since its launch, producing Tesla’s Cybertruck and Model Y. Crossing the half-million vehicle mark solidifies the facility’s importance to Tesla’s overall operations, especially considering the fact that the Model Y is the company’s best-selling vehicle.
While Giga Texas is just producing the Model Y and the Cybertruck for now, the facility is also poised to produce the Cybercab. The Cybercab is expected to be Tesla’s highest volume vehicle, with Elon Musk estimating that the company would be producing about 2 million units of the autonomous two-seater per year.
The Cybercab is unlike any vehicle that is currently produced today, and its production would be quite extraordinary. As per Elon Musk’s previous comments, the Cybercab’s manufacturing line would not look like an automotive production line at all. Instead, Musk noted that the Cybercab’s line in Gigafactory Texas would resemble a high-speed consumer electronics line instead.
“We do want to scale up production to new heights obviously with the Cybercab. Cybercab is not just revolutionary car design. It’s also a revolutionary manufacturing process. So I guess we probably don’t talk about that enough, but if you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line,” Musk previously stated.
News
Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized
Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier.

Tesla might have all but finalized the design for its Optimus V3 humanoid robot, at least if rumors from China prove accurate. As per recent reports, Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier, with deliveries expected sometime in the first quarter of 2026.
The volume of orders suggested by the reports from China suggests that the components will not just be used for Optimus prototypes.
The rumor
As noted in a report from Sina News, media outlets across China have recently reported that Tesla has placed a $685 million (5 billion RMB) order for linear actuators from Sanhua Intelligent Controls. The components will reportedly be used for the production of Optimus, which will likely be mass-produced in its V3 iteration. The reports claimed that the delivery of the actuators will likely start sometime in the first quarter of 2026.
Industry watchers have estimated that such a volume would be enough for about 180,000 Optimus robots. This suggests that while Tesla might not be able to start the initial production of its humanoid robots this year, the electric vehicle maker might be able to hit the ground running with its Optimus production next year. And as hinted at by Elon Musk’s comments on X, Tesla seems to be preparing to produce Optimus V3 en masse.
Company comments
The reports of Tesla’s alleged actuator orders have resulted in Sanhua Intelligent Controls’ stock rising. Interestingly enough, a Tesla China representative has stated that “no official information about this order that could be disseminated externally.” A representative from Sanhua, on the other hand, simply stated that the company’s robotics business is progressing smoothly, but they could not comment on market rumors.
While these reports are rumors for now, there are some optimistic hints that Tesla might have all but finalized the design for Optimus V3, and the company might be looking to start the robot’s production. For one, Sanhua is already a Tesla supplier, providing components for the company’s electric cars. A report from The Information also alleged that Tesla is no longer looking to produce 5,000 Optimus robots in 2025. This was reportedly due to challenges in the robot’s hands.
If Tesla is really starting to order large volumes of components for Optimus’ production, it would suggest that the company might have overcome the challenges it was facing with the humanoid robot earlier this year. It would then not be farfetched if Tesla were able to start the initial production of Optimus V3 next year.
News
Tesla eyes two new states for Robotaxi

Tesla has officially shown that it is eyeing two new states for Robotaxi operation in the U.S., as it hopes to add the new areas to its ever-growing list of places where the suite is either active or in the testing phase.
Tesla first launched its Robotaxi suite in Austin, Texas, in late June. It expanded the suite to the San Francisco Bay Area just a month later. Since then, it has not launched any public rides in any other states, but it has gained several approvals for early testing.
In preparation for operation in new states, Tesla routinely lists job postings on its Careers website, which helps align potential employees with opportunities ahead of regulatory approvals. This is a strategy that allows Tesla to start operations immediately upon licensing for testing.
Tesla started hiring Vehicle Operators for Autopilot in Arizona and Nevada months before the company gained any sort of approvals from state governments for Robotaxi. However, those approvals eventually came in the form of testing licenses, which allow the company to perform validation ahead of its public launch.
Tesla begins validating Robotaxi in a new area, hinting at expansion
Now, Tesla has posted job listings for Vehicle Operators for Autopilot in two new states: Colorado and Illinois. The Colorado job listing is located in Aurora, a suburb of Denver. Tesla is looking for Robotaxi operators in Chicago as well.
These postings hint toward Tesla’s continuing efforts to expand Robotaxi to new places. Earlier this year, CEO Elon Musk said the company would like to have Robotaxi available to at least half of the U.S. population.
It has expanded significantly since its initial launch in late June, but it is still a far way off from where Tesla would like it to be by year’s end.
So far, Tesla has job listings for Autopilot Vehicle Operators in Arizona, California, Texas, Florida, Colorado, Nevada, and Illinois.
-
News1 week ago
Tesla FSD (Supervised) V14.1 with Robotaxi-style dropoffs is here
-
Elon Musk2 hours ago
Starship’s next chapter: SpaceX eyes tower catch after flawless Flight 11
-
News1 week ago
Tesla all but confirms that affordable Model Y is coming Tuesday
-
News3 hours ago
Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized
-
Elon Musk2 weeks ago
Elon Musk announces ‘Grokipedia’ as Wikipedia alternative from xAI
-
Elon Musk1 week ago
Tesla releases cryptic teaser for something massive and it’s coming this week
-
Investor's Corner2 weeks ago
Tesla Q3 deliveries expected to exceed 440k as Benchmark holds $475 target
-
News1 week ago
Tesla plant manager tips off affordable model production